Miele Refrigerator KF 7544 User Manual

Operating and installation instructions  
Fridge freezer combination  
with dynamic cooling  
KF 7544 SND ed-3  
To avoid the risk of accidents or  
damage to the appliance it is  
essential to read these operating instructions  
G
before it is installed or used for the  
first time.  
M.-Nr. 05 910 950  
 
Contents  
Freezing and storing food. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
 
Description of the appliance  
aSuper cool button and indicator light  
fFreezer section temperature display  
bOn button to switch on the whole ap- gFreezer section  
pliance or  
On/Off button for independently  
switching the  
temperature selector buttons  
(upper button: warmer, lower button:  
colder)  
refrigerator section on and off.  
hMain switch for switching  
cRefrigerator section  
temperature selector buttons  
(upper button: warmer, lower button:  
colder)  
the whole appliance on and off  
iSuper freeze button  
and indicator light  
jAlarm button  
dRefrigerator section temperature dis-  
play  
eSafety lock - indicator light  
4
 
 
Description of the appliance  
kSwitch for dynamic cooling  
lFan for dynamic cooling  
mButter and cheese compartment  
nInterior lighting  
oEgg trays  
pBottle rack  
qAdjustable shelves  
rCondensate channel and  
drain hole  
sAdjustable door shelves  
tFruit and vegetable containers  
uDivider  
vFreezer drawers with  
freezer calendar  
wMarker system for frozen food  
5
 
Caring for the environment  
Disposal of the packing  
material  
Disposal of your old appliance  
Old appliances contain materials which  
can be reclaimed or recycled. Please  
contact your dealer, your waste collec-  
tion centre or scrap merchant about  
potential recycling schemes.  
The transport and protective packing  
has been selected from materials which  
are environmentally friendly for disposal  
and can normally be recycled.  
Make sure that the pipework is not  
damaged whilst moving an old appli-  
ance. This is to ensure that the refriger-  
ant and oil in the compressor cannot  
leak into the environment. It is important  
that they are disposed of in a safe  
manner by authorised persons only.  
Rather than just throwing these  
materials away, please ensure they are  
offered for recycling.  
Ensure that any plastic wrappings,  
bags etc. are disposed of safely and  
kept out of the reach of babies and  
young children. Danger of suffocation!  
Ensure that the appliance presents no  
danger to children while being stored  
for disposal.  
See the appropriate section in the  
Warning and safety instructions.  
6
 
 
Warning and Safety instructions  
Technical safety  
This appliance complies with all rele-  
This appliance contains the coolant  
Isobutane (R600a), a natural gas  
which is very environment friendly. Al-  
though it is flammable, it does not dam-  
age the ozone layer and does not in-  
crease the green house effect. The use  
of this environment friendly coolant has,  
however, led to a slight increase in the  
noise level of the appliance. In addition  
to the noise of the compressor, you  
might be able to hear the coolant flow-  
ing around the system. This is unavoid-  
able, but does not have any adverse ef-  
fect on the performance of the appli-  
ance.  
Care must be taken during transporta-  
tion and setting up of the appliance that  
no parts of the coolant system are dam-  
aged. Leaking coolant can damage the  
eyes.  
In the event of any damage:  
- avoid open fires  
vant legal safety requirements. Inap-  
propriate use can however lead to  
personal injury and damage to prop-  
erty.  
Read the operating instructions  
carefully before starting to use this  
appliance. They contain important  
notes on installation, safety, opera-  
tion and care of the appliance. This  
way you will avoid the risk of acci-  
dents and damage to the appliance.  
Keep these operating instructions in  
a safe place and pass them on to  
any future user.  
Correct use  
This appliance is intended for do-  
mestic use only for the cool stor-  
age of food and drink as well as for  
storing deep frozen food, freezing fresh  
food and for preparing ice. Any other  
usage is not supported by the manu-  
facturer and could be dangerous. The  
manufacturer cannot be held liable for  
damage caused by improper use of the  
appliance.  
and anything which creates a spark,  
- disconnect from the mains,  
- air the room in which the appliance is  
located for several minutes and  
- contact the Service Department  
for advice.  
The more refrigerant there is in an  
appliance, the larger the room it  
should be installed in. In the event of a  
leakage, if the appliance is in a small  
room, there is the danger of combusti-  
ble gases building up.  
For every 8 g of coolant at least 1 m3  
room space is required. The amount of  
coolant in the appliance is stated on the  
data plate inside the appliance.  
7
 
 
Warning and Safety instructions  
Before connecting the appliance to  
the mains supply make sure that  
the rating on the data plate corre-  
sponds to the voltage and frequency of sons to ensure safety.  
Installation work, maintenance and  
repairs may only be carried out by  
suitably qualified and competent per-  
the household supply. This data must  
correspond in order to avoid risk of  
damage to the appliance. Consult a  
qualified electrician if in doubt.  
Repairs and other work by unqualified  
persons could be dangerous and the  
manufacturer will not be held liable.  
Ensure that current is not supplied  
to the appliance while maintenance  
The electrical safety of this appli-  
ance can only be guaranteed when or repair work is being carried out.  
continuity is complete between the ap-  
The appliance is only completely  
pliance and an effective earthing sys-  
isolated from the electricity supply  
tem, which complies with local and na-  
when:  
tional safety regulations. It is most im-  
portant that this basic safety require-  
ment is tested regularly and where  
there is any doubt the household wiring  
system should be inspected by a quali-  
fied electrician. The manufacturer can-  
not be held liable for the consequences  
of an inadequate earthing system (e.g.  
electric shock).  
– the plug has been withdrawn. Do not  
pull on the cable, only on the plug.  
– the mains fuse is withdrawn, or  
– the screw-out fuse is removed in  
countries where this is applicable.  
Do not connect the appliance to  
the mains electricity supply by an  
extension lead.  
Extension leads do not guarantee the  
required safety of the appliance (e.g.  
danger of overheating).  
Safe operation of the appliance is  
only assured if it has been installed  
and connected in accordance with  
these operating and installation instruc-  
tions.  
Operation  
This equipment is not designed for  
maritime use or for use in mobile  
installations such as caravans, aircraft  
etc. However it may be suitable for  
such usage subject to a risk assess-  
ment of the installation being carried  
out by a suitably qualified engineer.  
Never handle frozen food with wet  
hands. Your hands may freeze to  
the frozen food. Danger of frost burn.  
Do not take ice cubes out with your  
bare hands and never place ice  
cubes or ice lollies in your mouth  
straight from the freezer.  
The very low temperature of the frozen  
ice or lollies can cause frost burn to the  
lips and tongue.  
8
 
Warning and Safety instructions  
Do not refreeze thawed or partially  
Do not use sharp edged objects to  
– remove frost and ice,  
thawed food. Defrosted food  
should be used up as quickly as possi-  
ble as food soon loses its nutritional  
value and goes off. Defrosted food may  
only be re-frozen after it has been  
cooked.  
– separate frozen foods and remove  
ice trays.  
They will damage the evaporator caus-  
ing irreversible damage to the appli-  
ance.  
Do not store explosive materials in  
the appliance or any products con-  
taining propellants (e.g. spray cans).  
Switching on thermostats may produce  
sparks which could present a fire haz-  
ard.  
Never place electric heaters or  
candles in the appliance to defrost  
it. These can damage the plastic parts.  
Do not use defrosting sprays, or  
de-icers as they could contain sub-  
stances which could damage the plas-  
tic parts and which may cause the build  
up of gases and pose a danger to  
health.  
If storing alcohol with a high per-  
centage proof, make sure it is  
tightly closed and stored upright.  
Danger of explosion.  
Do not store cans or bottles con-  
taining carbonated drinks or liquids  
which could freeze in the freezer. The  
cans or bottles could explode.  
Danger of injury and damage to the ap-  
pliance.  
Do not use any oils or grease on  
the door seals as these will cause  
the seals to deteriorate and become  
porous with time.  
Do not store cooking oil in the ap-  
pliance door. Traces of oil can  
cause stress cracks to occur in the  
plastic components in the door.  
When cooling drinks quickly in the  
freezer make sure bottles are not  
left in for more than one hour, otherwise  
they could burst. Danger of injury and  
damage to the appliance.  
Do not block the ventilation gaps in  
the appliance as this would impair  
the efficiency of the appliance, increase  
the electricity consumption and could  
cause damage to the appliance.  
Observe the "use by" dates given  
on food to avoid the risk of food  
poisoning.  
Storage times will depend on several  
factors including the freshness and  
quality of the food as well as the tem-  
perature at which it is stored. Follow the  
instructions given on food manufac-  
turer’s packaging on storage conditions  
required as well as the "use by" date.  
9
 
Warning and Safety instructions  
The appliance is designed for a  
use within certain climate ranges  
(ambient temperatures). It must not be  
used in ranges for which it is not de-  
signed. The climate range for your ap-  
pliance is stated on the data plate in-  
side the appliance.  
Installing it in a room with too low an  
ambient temperature will lead to the ap-  
pliance switching off for longer periods  
so that it cannot maintain the required  
temperature.  
Disposal of your old appliance  
Before disposing of an old appli-  
ance first make the door latch or  
lock unusable.  
This way you will prevent children from  
accidentally locking themselves in and  
endangering their lives.  
Before disposing of an old appli-  
ance, unplug it and render the plug  
useless. Cut off the cable directly be-  
hind the appliance and at the plug to  
prevent misuse.  
Never use a steam-cleaning appli-  
ance to defrost or clean this appli-  
ance. Pressurised steam could reach  
the electrical components and cause a  
short circuit.  
Be careful not to damage any part  
of the pipework whilst awaiting dis-  
posal, e.g. by  
– puncturing the refrigerant channels  
in the evaporator.  
In countries where there are areas  
which may be subject to infestation  
by cockroaches or other vermin, pay  
particular attention to keeping the appli-  
ance and its surrounding in a clean  
condition at all times. Any damage  
which may caused by cockroaches or  
vermin will not be covered by the appli-  
ance guarantee.  
– bending any pipework.  
– scratching the surface coating.  
Splashes of refrigerant can damage the  
eyes.  
The manufacturer cannot be held  
liable for damage caused by  
non-compliance with these Warning  
and Safety instructions.  
10  
 
Switching on and off  
Before using for the first time  
Switching off  
The stainless steel surface has a pro-  
tective cover to prevent scratching dur-  
ing transportation.  
^ Press the main switch.  
The temperature display goes out and  
the cooling process is switched off. If  
^ Do not remove this cover until the ap- this does not happen, then the safety  
pliance has been installed or built in.  
Start at one of the upper corners.  
lock is still engaged.  
To switch the refrigerator section off  
separately  
^ Clean the inside of the appliance and  
the accessories with warm water and  
a little washing up liquid and then dry  
with a soft cloth.  
The refrigerator section can be  
switched off without having to switch off  
the freezer section. This is useful e.g.  
whilst on holiday.  
Important: To ensure correct func-  
tioning of the appliance, let it stand  
for between ½ and 1 hour after  
transporting it to its final location be-  
fore connecting it to the mains.  
Switching on  
^ Press the On/Off button for the refrig-  
erator section.  
The refrigerator and freezer sections  
are switched on together by pressing  
the main switch or by pressing the on  
button on the left hand side of the con-  
trol panel.  
The temperature display for the re-  
frigerator section goes out and the  
refrigerator section switches off.  
^ Press the main switch.  
Bars will light up in the temperature dis-  
play and a buzzer will sound. The appli-  
ance starts cooling.  
Allow the appliance to run for a few  
hours before placing food in it. This will  
ensure that the temperature is suffi-  
ciently low.  
11  
 
 
Switching on and off  
To switch the refrigerator section  
back on again  
Engaging the safety lock  
^ Press and hold the alarm button.  
^ Then press the Super freeze button  
as well and keep both buttons  
pressed in for approx. 3 seconds un-  
til the Safety lock indicator light d in  
the temperature display lights up and  
a beep sounds.  
^ Press the On/Off button again.  
The appliance can now not be switched  
off until the lock is de-activated.  
Bars will appear in the temperature  
display for the refrigerator section.  
The refrigerator section starts cool-  
ing. The interior light will come on  
when the door is opened.  
De-activating the safety lock  
^ Repeat the same procedure as for  
engaging the lock given above.  
The safety lock indicator light must go  
out in the temperature display. The ap-  
pliance can now be switched off at any  
time.  
Switching off the alarm  
Switching off for longer  
periods of time  
^ Press the alarm button.  
If the appliance is not going to be used  
for a longer period of time, e.g. whilst  
on holiday  
The alarm stops. The bars will continue  
flashing in the temperature display until  
the temperature which has been set is  
reached.  
^ switch the appliance off at the mains,  
^ withdraw the plug (pull on the plug  
and not the cable),  
Cool pack  
^ clean the appliance out and  
Place the cool pack in the top drawer or  
to save space on the freezer tray. The  
cool pack will be at its most effective af-  
ter it has been in the freezer for approx.  
24 hours.  
^ leave the doors ajar to air the appli-  
ance.  
If, during a long absence, the appli-  
ance is switched off but not cleaned  
out and the doors are left shut there  
is a danger of mould and odours  
building up inside the appliance.  
Safety lock  
The safety lock can be engaged to pre-  
vent the appliance being switched off  
inadvertently.  
12  
 
 
The correct temperature  
It is very important to set the correct  
temperature for storing food in the ap-  
pliance. Micro organisms will cause  
food which is not stored at the correct  
temperature to deteriorate rapidly. Tem-  
perature influences the growth rate of  
these micro organisms. Reducing the  
temperature reduces their growth rate.  
. . . in the freezer  
For freezing fresh food and storing  
frozen food for a long time a tempera-  
ture of at least -18 °C is needed. At this  
temperature the growth of micro organ-  
isms is generally halted. As soon as the  
temperature rises to above -10 °C, the  
micro organisms become active in the  
food again so that it cannot be kept as  
long. For this reason, partially defrosted  
or defrosted food must not be re-frozen.  
Food may be re-frozen once it has  
been cooked as the high temperatures  
achieved when cooking destroy most  
micro organisms.  
The temperature in the appliance will  
rise:  
– the more often the door is opened  
and the longer it is kept open,  
– if too much food is stored in it at  
once,  
– the warmer the food is which is being  
put into it,  
Temperature selection  
The temperatures for the refrigerator  
section and for the freezer section are  
set independently from one another us-  
ing the buttons to the right and left  
hand sides of the temperature displays.  
– the higher the ambient temperature  
surrounding the appliance.  
The appliance is designed for use in  
specific ambient temperatures (cli-  
mate ranges). Do not use in ambient  
temperatures for which it is not de-  
signed.  
Press the  
. . . in the refrigerator  
We recommend a temperature of 5 °C  
in middle of the refrigerator section.  
Upper button: to raise the temperature  
(it gets warmer)  
Lower button: to reduce the tempera-  
ture (it gets colder)  
The temperature being set will flash in  
the display.  
13  
 
 
The correct temperature  
When pressing the buttons the follow-  
ing are shown in the display:  
Temperature range  
The temperature can be adjusted:  
– When first pressed: The last  
– in the refrigerator section from 2 °C  
to 11 °C  
temperature selected flashes.  
– Each subsequent press of the but-  
– in the freezer section from -16 °C to  
-26 °C  
ton:  
adjusts the temperature shown in  
1 °C steps.  
The ambient temperature in the room  
and the installation location can affect  
the time it takes for the appliance to  
reach the lowest temperture. If the am-  
bient temperature is too high, the appli-  
ance may not reach the lowest temper-  
– Keeping the button pressed in: ad-  
justs the temperature continually.  
Approx. 5 seconds after letting go of  
the button the current actual tempera-  
ture of the refrigerator or freezer is auto- ature.  
matically shown.  
Temperature displays  
If you have adjusted the temperature,  
wait for approx. 6 hours if the appli-  
ance is not very full and for approx.  
24 hours if the appliance is full before  
checking the temperature display as it  
will take this long for the display to  
show the accurate temperature of the  
appliance. If, after this time, the temper-  
ature is too high or too low, you will  
need to adjust it again.  
During normal operation the tempera-  
ture display shows the temperature in  
the middle of the refrigerator section  
and the temperature in the warmest  
part of the freezer section.  
If the temperature in the appliance is  
not within the range that the appliance  
is able to display (i.e. if it is not between  
0 °C and 19 °C in the refrigerator sec-  
tion, and if the temperature in the  
freezer section is above 0 °C), only a  
bar will light up in the temperature dis-  
plays.  
It will take between 3 and 8 hours ap-  
proximately for the appliance to reach  
the required temperature. The time it  
takes will depend on where the appli-  
ance is located and the temperature  
setting selected.  
14  
 
 
The correct temperature  
The temperature displays flash, if  
Temperature display brightness  
– a different temperature is being set,  
The appliance is supplied with the  
brightness of the temperature display  
set as low as possible. However, if the  
door is opened, a setting changed or if  
the alarm is sounding, the temperature  
display will appear much brighter for  
approx. 1 minute.  
– the temperature in the appliance has  
risen by several degrees, indicating  
that the appliance is warming up too  
much.  
This loss of coldness is no cause for  
concern in the following circumstances:  
The level of brightness can be adjusted  
– when the door has been left open for to be:  
a while, e.g. for removing or storing a  
Brighter: by pressing the alarm but-  
large amount of food,  
ton, and whilst holding it in, press the  
upper button next to the temperature  
display for the freezer section.  
– when fresh food is being frozen.  
However, if the temperature remains  
above -18 °C for a long time, check that Dimmer: by pressing the alarm but-  
the frozen food has not started to de-  
frost. Do not refreeze thawed or de-  
frosted food! If it has started thawing,  
check that the food is safe to use and if  
it is, use it as soon as possible.  
ton, and whilst holding it in, press the  
lower button next to the temperature  
display for the freezer section.  
15  
 
 
Alarm  
Your appliance has been fitted with a  
warning system which ensures that the  
temperature in the freezer cannot rise  
unnoticed and to avoid energy being  
wasted if the door is left open. The  
alarm system is always active. You can-  
not disable it.  
Switching the alarm tone off  
early  
Once the set temperature has been  
reached in the freezer section, the  
alarm tone stops and the temperature is  
displayed constantly. However, if the  
noise disturbs you, you can turn the  
alarm tone off before this if you wish.  
Temperature alarm  
If the temperature in the freezer gets  
too warm an alarm will sound and the  
temperature display will flash. The tem-  
perature the appliance is set at deter-  
mines the temperature the appliance  
recognises as being too warm.  
^ Press the alarm button. The alarm  
stops. The temperature display con-  
tinues to flash until the set tempera-  
ture has been reached. It then lights  
up constantly.  
The alarm will sound and the tempera-  
ture display will flash:  
– when the freezer is switched on.  
– when the freezer section door has  
been left open for a while, e.g. in or-  
der to load, re-arrange or take food  
out of the freezer.  
– when freezing large amounts of food.  
– when there has been a lengthy inter-  
ruption to the power supply.  
Door alarm  
If the door has been left open for  
approx. 60 seconds the alarm will  
sound.  
16  
 
 
Super cool, super freeze and dynamic cooling  
Super cool  
Freezing fresh food  
The super cool function can be used to Fresh food should be frozen as quickly  
rapidly reduce the temperature in the  
refrigerator section to its lowest setting.  
as possible. This way the nutritional  
value of the food, its vitamin content,  
appearance and taste are not impaired.  
Switching on super cool  
Food which takes a long time to freeze  
will lose more water from its cells which  
then shrink.  
During the defrosting process only  
some of this water is reabsorbed by the  
cells. The rest collects around the food.  
Super cool is particularly recom-  
mended for faster chilling of large  
amounts of fresh food or drink.  
In practice this means that the food  
loses a large degree of its moisture.  
If food is frozen quickly the cells have  
less time to lose moisture so they shrink  
less. As there is not so much moisture,  
it is easier for the food to reabsorb it  
during the defrosting process.  
^ Press the super cool button, the  
super cool indicator light will come  
on.  
The appliance works at full power to  
lower the temperature in the refrigera-  
tor section.  
Switching off super cool  
The super cool function switches itself  
off automatically after approx. 6 hours.  
The indicator light goes out and the ap-  
pliance continues running at normal  
power.  
To save energy the super cool function  
can be switched off once food and  
drinks are sufficiently chilled.  
^ Press the super cool button. The  
super cool indicator light will go out.  
The appliance continues running at  
normal power.  
17  
 
 
Super cool, super freeze and dynamic cooling  
Super freeze  
Dynamic cooling  
Switch the super freeze function on be- With dynamic cooling the temperature  
fore putting fresh food into the freezer.  
inside the refrigerator section is distrib-  
uted to all areas more evenly. All food  
stored in the refrigerator section will be  
chilled to about the same degree. The  
temperature is controlled as normal  
with the temperature buttons.  
Exceptions:  
– when putting in frozen food.  
– when freezing up to 2 kg fresh food  
daily.  
Dynamic cooling should be selected  
when:  
Switching on super freeze  
– the ambient temperature in the room  
is high (above approx. 30 °C) and  
When freezing small quantities of food  
in the freezer, the super freeze function  
should be switched on 4 – 6 hours be-  
forehand. When freezing the maxi-  
mum load of food the super freeze  
function should be switched on 24  
hours beforehand.  
– the room humidity level is high.  
Switching on dynamic cooling  
^ Press the switch for dynamic cooling  
above the fan to m.  
The fan will start turning.  
To save energy, the fan will switch itself  
off when the refrigerator section door is  
opened.  
^ Press the super freeze button, the  
super freeze indicator light will come  
on.  
Switching off dynamic cooling  
When dynamic cooling is switched on  
the appliance uses more energy. It  
should therefore be switched off when  
the room temperature is normal (below  
30 °C) and when humidity levels are  
normal.  
The appliance works at full power to  
lower the temperature in the freezer  
section.  
^ Press the switch for dynamic cooling  
Switching super freeze off  
to "0".  
Depending on the amount of food  
placed in the freezer the super freeze  
function will switch off automatically af-  
ter approx. 30 to 60 hours. The super  
freeze indicator light will go out and the  
appliance will continue running at nor-  
mal power.  
The fan will stop after a short while.  
18  
 
 
Using the refrigerator section efficiently  
Different storage zones  
Do not store explosive materials in  
the appliance or any products con-  
taining combustible gas (e.g. spray  
cans). Danger of explosion.  
Natural air circulation gives rise to dif-  
ferent temperature zones inside the re-  
frigerator section. Cold, heavy air sinks  
to the lowest section of the appliance.  
Make use of the different zones when  
placing food in the appliance.  
If storing alcohol with a high per-  
centage proof, make sure it is tightly  
closed, and store upright.  
Coldest zone  
The coldest zone in the refrigerator sec-  
tion is directly above the vegetable  
containers.  
Do not store cooking oil in the refrig-  
erator door.  
Traces of oil can cause stress  
cracks to occur in the plastic com-  
ponents in the door.  
Use this for all delicate and highly per-  
ishable food, e.g.  
– fish, meat, poultry,  
Food must not touch the back wall of  
the appliance. Otherwise it may  
freeze to the back wall.  
– sausage products, ready meals,  
– dishes or baked goods containing  
eggs or cream  
Food which should not be  
stored in a refrigerator  
– fresh dough, cake mixtures, pizza or  
quiche dough,  
Not all food is suitable for refrigeration.  
These include:  
– soft cheese and other dairy prod-  
ucts,  
– Fruit and vegetables which are sensi-  
tive to cold, such as bananas, avo-  
cado pears, papaya, passion fruit,  
aubergines, peppers, tomatoes and  
cucumbers  
– pre-packed vegetables and other  
fresh food with a label stating it  
should be kept at a minimum temper-  
ature of 4 °C.  
– Fruit which is not yet ripe  
– Potatoes  
Warmest zone  
The warmest zone is in the top section  
of the refrigerator door. Use this for stor- – Some hard cheeses  
ing butter and cheese.  
19  
 
 
Using the refrigerator section efficiently  
Storing food correctly  
Energy saving tips  
Store food covered or packaged. This  
will prevent food smells or tastes from  
affecting other foods and prevent food  
from drying out. The growth of bacteria,  
such as salmonella, can be avoided by  
setting the correct temperature and  
maintaining good standards of hygiene.  
– Frequently opening the door or keep-  
ing it open for too long will cause the  
temperature in the appliance to rise.  
The appliance will have to run more  
often in order to maintain the cool  
temperature inside the appliance.  
Only open the door when you need  
to and then only for as long as nec-  
essary.  
Fruit and vegetables  
Fruit and vegetables can be stored  
loose in the vegetable containers. How-  
ever, you should bear in mind that  
some types of vegetables give off a  
natural gas which speeds up the rate at  
which food perishes. Some fruit and  
vegetables react stongly to this gas  
and should not be stored together in  
the vegetable containers.  
– If you organise where you store your  
food correctly you should be able to  
find things quickly and easily without  
allowing the temperature in the appli-  
ance to rise. Sort the food out care-  
fully before putting it into the appli-  
ance.  
– Hot food and drinks must be cooled  
to room temperature before placing  
them in the appliance.  
Examples of fruit which produce a  
large amount of this natural gas are:  
– Do not store groceries too close to  
each other. Space should be left be-  
tween individual items for air to circu-  
late.  
Apples, apricots, pears, nectarines,  
peaches, plums, avocado pears and  
figs.  
Examples of fruit and vegetables  
which react strongly to the natural  
gases given off by other types of fruit  
and vegetables are:  
Kiwis, broccoli, cauliflower, brussels  
sprouts, mangos, honeydew melons,  
apples, apricots, cucumbers, tomatoes,  
pears, nectarines and peaches.  
20  
 
 
Adjusting the interior fittings  
Moving the shelves  
Adjusting the door shelves  
The shelves can be adjusted according ^ Push the door shelf upwards then re-  
to the height of the food.  
move it by pulling it forwards.  
^ Pull the shelves forward as far as  
they will go then lift them upwards to  
remove them.  
^ Replace the door shelf at the re-  
quired position. Ensure that it is se-  
curely pushed back into position.  
^ With the rear barrier facing upwards  
place the shelf at the required posi-  
tion.  
The rear barrier must face upwards to  
prevent food from touching the back  
of the appliance and freezing to it.  
Moving the bottle divider  
The bottle divider can be moved to the  
left or right to ensure that bottles are  
held securely in position when the door  
is opened and shut.  
Split shelf  
(depending on model)  
In order to accommodate tall items in  
the appliance one of the shelves is di-  
vided. The front section can be pushed  
under the rear section.  
^ Pull the front half of the glass shelf  
forwards slightly and then push it  
carefully under the rear half.  
21  
 
 
Freezing and storing food  
Maximum freezing capacity  
Home freezing  
To ensure that fresh food placed in the  
freezer freezes through to the core as  
quickly as possible, the maximum  
freezing capacity must not be ex-  
ceeded. The maximum freezing capac-  
ity for freezing within a 24 hour period is  
given on the data plate “Freezing ca-  
pacity ....kg/24 hrs”.  
Only freeze fresh food which is in a  
good condition.  
Hints on home freezing  
– The following types of food are suit-  
able for freezing:  
Fresh meat, poultry, game, fish, veg-  
etables, herbs, fresh fruit, dairy prod-  
ucts, pastry, leftovers, egg yolks, egg  
whites and a range of pre-cooked  
meals.  
Storing frozen food  
When buying frozen food to store in  
your freezer check  
– The following types of food are not  
suitable for freezing:  
– that the packaging is not damaged,  
– the use by date,  
Grapes, lettuces, radishes, sour  
cream, mayonnaise, eggs in their  
shells, onions, whole raw apples and  
pears.  
– the temperature at which the frozen  
food is being stored in the shop. The  
length of time it can be kept is re-  
duced if it has been stored at a  
temperaure warmer than -18 °C.  
To retain colour, taste and vitamin C,  
vegetables should be blanched after  
they have been trimmed and  
washed. To blanch: bring a large  
saucepan of water to the boil, im-  
merse the vegetables in the fast boil-  
ing water for 2-3 minutes, depending  
on variety. Remove and cool quickly  
in cold water. Drain and pack ready  
for freezing.  
^ Buy frozen food once you have fin-  
ished the rest of your shopping and  
wrap it in newspaper or use a cool  
bag or box to transport it.  
^ Store it in the freezer as soon as pos-  
sible.  
– Lean meat freezes better than fatty  
meat and can be stored for consider-  
ably longer.  
Never re-freeze partially or fully de-  
frosted food. Consume defrosted  
food as soon as possible as it will  
lose its nutritional value and spoil if  
left for too long. Defrosted food may  
only be re-frozen after it has been  
cooked.  
To prevent chops, steaks, cutlets or  
rolled meat from freezing together in  
solid blocks when packed, separate  
with a sheet of plastic freezer film.  
22  
 
 
Freezing and storing food  
– Do not season fresh foods or  
blanched vegetables before freez-  
ing. Only season cooked food lightly  
before freezing but care should be  
taken as the taste of some spices al-  
ters when frozen.  
^ Make a note of the contents and the  
date of freezing on the packaging.  
Before placing food in the freezer  
^ When freezing more than 2 kg of  
fresh food, switch on the super freeze  
function for some time before placing  
the food in the freezer (see "Super  
freeze").  
– Do not place hot foods or drinks in  
the freezer. This causes already  
frozen food to thaw and increases  
the energy consumption consider-  
ably. Allow hot foods and drinks to  
cool down before placing them in the  
freezer.  
Placing food in the freezer  
Food to be frozen can be placed any-  
where in the freezer.  
Packing  
Each drawer and separator plate  
can be loaded with a maximum of  
25 kg.  
^ Freeze food in portions.  
Suitable packing material  
- plastic freezer film  
- freezer bags  
- aluminium foil  
- freezer containers  
When freezing large items e.g. a turkey  
or a large joint of meat, the separator  
plate in between two of the freezer  
drawers can be removed to give more  
room. This way food can be stored in  
the space of two drawers.  
Unsuitable packing material  
- wrapping paper  
- grease-proof paper  
- cellophane  
The bottom freezer drawer must not  
be taken out of the appliance.  
After removing the top drawer make  
sure that you do not block the venti-  
lation slits in the back wall of the ap-  
pliance. They are important for trou-  
ble-free operation of the appliance.  
- bin bags  
- plastic carrier bags  
^ Expel as much air as possible from  
bags etc. before sealing them to pre-  
vent freezer burn on food.  
^ Remove the drawers above and be-  
low the separator plate.  
^ Close the packaging tightly with  
- rubber bands  
- plastic clips  
- string or bag ties  
- freezer tape.  
Freezer bags may also be sealed us-  
ing home heat sealing kits.  
23  
 
 
Freezing and storing food  
Freezer calendar  
The freezer calendar on the freezer  
drawer gives the length of time which  
various foods can be stored for effec-  
tively.  
Where the storage time given on the  
packaging differs, follow the advice on  
the packaging.  
Marker system for frozen food  
^ Press down on the hook a under-  
neath the rear of the separator plate  
and pull the plate forwards and out  
b.  
Markers serve as a reminder of how  
long food has been stored.  
Each freezer drawer has two slide  
markers with dials. The months are rep-  
resented on the dials as 1 – 12.  
To put the separator plate back in push  
it back into place making sure it audibly  
clicks into position.  
^ Place the food flat in the bottom of  
the drawers so that it freezes through  
to the core as quickly as possible.  
^ Always freeze similar types of food  
together to save time and energy  
when taking food out of the freezer.  
^ Make sure that the packaging and  
containers are dry to prevent them  
sticking together when frozen.  
^ Slide the markers onto the guide run-  
ners on the edge of the drawers.  
When freezing, make sure that food  
already frozen does not come into  
contact with fresh food being frozen  
as this could cause the frozen food  
to begin to defrost.  
Use the markers to indicate the type of  
food being frozen and turn the dials to  
the appropriate number to indicate the  
month the food was first placed in the  
freezer.  
24  
 
 
Freezing and storing food  
Defrosting  
Ice cubes  
Frozen food can be defrosted in differ-  
ent ways:  
– in the microwave oven,  
– in the oven using the “Fan” or “De-  
frost” setting,  
– at room temperature,  
– in the fridge.  
^ Press down the release button on the  
ice cube tray and fill the tray with wa-  
ter. Any excess will flow out through  
the outlet.  
Poultry It is particularly important to  
observe food hygiene rules when de-  
frosting poultry. Do not use the liquid  
from defrosted poultry. Pour it away and  
wash the container it was in, the sink  
and your hands.  
^ Now pull the release button up to  
seal the ice cube tray. Place the tray  
in the bottom of the freezer section.  
^ Once frozen, use a blunt instrument,  
for example a spoon handle, to re-  
move the ice tray from the freezer.  
Fruit should be defrosted at room tem-  
perature in its packing or in a covered  
bowl.  
^ Ice cubes can be removed easily  
from the tray by holding it under cold  
running water for a short while.  
Most vegetables can be cooked while  
still frozen. Just put straight into boiling  
water or hot fat. The cooking time is  
slightly less than that of fresh vegeta-  
bles.  
Cooling drinks  
Drinks are best cooled quickly in the re-  
frigerator section using the Super cool  
function. If bottles have been placed in  
the freezer for rapid cooling, make sure  
they are not left in the freezer for more  
than one hour, as they could burst.  
Never re-freeze partially or fully de-  
frosted food. Consume defrosted  
food as soon as possible as it will  
lose its nutritional value and spoil if  
left for too long. Defrosted food may  
only be re-frozen after it has been  
cooked.  
25  
 
 
Freezing and storing food  
Freezer tray  
Cool pack  
The freezer tray is useful for freezing  
The cool pack prevents the tempera-  
small items such as berries and vegeta- ture in the freezer rising too quickly in  
bles. They can be frozen individually  
and therefore maintain their shape  
when defrosted.  
the event of a power cut.  
Place the cool pack in the upper  
drawer directly on top of food or to save  
space on the freezer tray. The cool  
pack will be at its most effective after it  
has been in the freezer for approx. 24  
hours.  
If there is a power cut place the cool  
pack directly on top of the frozen food  
in the upper drawer so that the food will  
be kept cold for as long as possible.  
^ Space the food out loosely on the  
tray.  
When placing fresh food in the freezer,  
use the cool pack to separate the fresh  
food from the food which is already  
frozen so that the frozen food does not  
begin to thaw.  
^ Hang the tray in one of the upper  
freezer drawers.  
Leave food for 10 - 12 hours to freeze  
thoroughly on the tray. Transfer it to a  
freezer bag or suitable container once  
frozen. Place the bag or container in  
the freezer drawer.  
The cool pack can also be used in a  
cool bag to keep food or drinks cool for  
a short period of time.  
26  
 
 
Defrosting  
Refrigerator section  
Freezer section  
Condensate and frost can build up on  
the back wall of the refrigerator section  
whilst it is in use. These are automati-  
cally removed and defrosted by the ap-  
pliance.  
This freezer is equipped with a  
"No-frost" system. The freezer section  
defrosts automatically.  
The moisture generated by defrosting  
collects in the condensor and is auto-  
matically dissipated by the condensor  
The condensate is drained away via a  
channel and drain hole into an evapora- from time to time.  
tion system at the back of the appli-  
This enables the freezer section to re-  
ance.  
main permanently ice-free while the  
food remains frozen. This system will  
not cause food stored in the freezer to  
defrost!  
Ensure that the condensate channel  
and drain hole are kept clean and  
are never blocked so that conden-  
sate can flow away without hin-  
drance.  
27  
 
 
Cleaning and care  
Cleaning the outer casing, the  
interior and accessories  
Never use cleaning agents contain-  
ing abrasive substances such as  
sand, soda, acids or chemical sol-  
vents.  
"Non-abrasive" cleaning agents are  
also unsuitable as they can cause  
matt areas to appear.  
^ Clean the refrigerator section at least  
once a month and the freezer section  
at regular intervals.  
^ Accessories and shelves should all  
be hand washed. The butter dish is,  
however, dishwasher safe.  
For stainless steel surfaces, use a  
proprietary stainless steel cleaning  
agent.  
^ Clean the condensate channel and  
drain hole frequently, so that conden-  
sate can drain away unhindered. Use  
a straw or similar to clear the drain if  
necessary.  
Make sure that no water can pene-  
trate into the electronic unit or into  
the light.  
^ Clean stainless steel surfaces with a  
suitable cleaning agent.  
Do not let water get into the drain-  
age channel and drain hole when  
cleaning.  
^ After cleaning, wipe the outer casing,  
the interior and accessories with a  
damp cloth and dry with a soft cloth.  
Leave the doors open to air the appli-  
ance for a short while.  
Never use steam cleaning appara-  
tus to defrost or clean the appliance.  
Pressurised steam could reach the  
electrical components and cause a  
short circuit.  
E-Cloth  
A microfibre "E-Cloth" is available from  
the Miele UK Spare Parts Department,  
Part Number 98013530, which is suit-  
able for cleaning surfaces such as  
stainless steel, glass, plastic and  
chrome without the use of chemicals. It  
can be washed 300 times.  
The data plate located inside the ap-  
pliance must not be removed. It  
contains information which is re-  
quired in the event of a service call.  
Before cleaning  
If you are unsure about a particular  
product or need further advice  
please contact your nearest Miele  
Sales office. See back page for ad-  
dress.  
^ Switch the appliance off by pressing  
the On-Off switch.  
^ Take any food out of the appliance  
and store it in a cool place.  
^ Take out any removable parts e.g.  
shelves for cleaning.  
28  
 
 
Cleaning and care  
Ventilation gaps  
After cleaning  
^ The ventilation gaps should be  
cleaned on a regular basis with a  
brush or vacuum cleaner. A build up  
of dust will increase the appliances  
energy consumption.  
^ Replace all shelves and accessories  
in the refrigerator section.  
^ Place food back in the refrigerator  
section, close the appliance doors,  
and switch the refrigerator section  
and the freezer section on.  
Door seals  
^ Switch on the super freeze function  
so that the freezer section can cool  
down quickly. The super freeze indi-  
cator light will come on.  
Do not use any grease or oil on the  
door seals as these will cause the  
seals to deteriorate and become po-  
rous over time.  
^ Once the temperature in the freezer  
has reached the required tempera-  
ture place the food back in the  
freezer drawers and place them back  
in the freezer.  
The door seals should be cleaned reg-  
ularly with clean water and then wiped  
dry with a soft cloth.  
^ Switch off the super freeze function  
with the super freeze button. The in-  
dicator light will go out.  
Metal grille at the back of the  
appliance  
The metal grille at the back of the appli-  
ance (heat exchanger) should be  
dusted at least once a year. A build up  
of dust will increase the energy con-  
sumption of the appliance.  
When cleaning the grille, make sure  
that the pipework and other compo-  
nents do not get broken or damaged  
in any way.  
29  
 
 
Problem solving guide  
Remember that the noise of the com-  
pressor and the coolant circulating in  
the system is unavoidable.  
Repairs to electrical appliances  
should only be carried out by a suit-  
ably qualified and competent person  
in accordance with local and na-  
tional safety regulations. Repairs  
and other work by unqualified per-  
sons could be dangerous. The man-  
ufacturer cannot be held responsible  
for unauthorised work.  
. . . the appliance does not get cool.  
^ Check whether the respective section  
is switched on. The relevant tempera-  
ture display must be lit up.  
^ Check that the plug is correctly in-  
serted in the socket.  
The following faults can be corrected  
without contacting the Miele Service  
Department:  
^ Check that the fuse is not defective  
and that the mains fuse has not  
blown. If it has, consult the Service  
department.  
What to do if ...  
. . . the door to the freezer section will  
not open because it has been opened  
and closed too many times in suc-  
cession.  
. . . strange noises can be heard after  
switching on the appliance, espe-  
cially after it has just been installed.  
^ Check to see whether any pieces of  
furniture next to the appliance are vi-  
brating whilst the appliance is in op-  
eration.  
This is not a fault. The suction caused  
by opening and closing the door is pre-  
venting the door from opening. Wait a  
few minutes and then try again. It  
should now open without force.  
Switch the appliance off then:  
^ Check whether the appliance is  
aligned correctly.  
. . . the temperature in the refrigerator  
section or freezer section is too low.  
^ Check whether all parts at the rear of  
the appliance are free from hin-  
drance. Remove any hindrance.  
^ Select a warmer temperature.  
^ The super freeze or super cool func-  
tion has not been switched off. The  
respective indicator light is still on.  
^ Check whether the cable clips were  
unclipped from the back of the appli-  
ance before installation. They could  
vibrate when the appliance is operat-  
ing.  
^ Are all removable parts securely lo-  
cated in the appliance?  
^ Are any bottles or containers unsta-  
ble or knocking against each other?  
30  
 
 
Problem solving guide  
. . . the appliance is switching in too  
frequently and for too long.  
. . . a bar is lit up or flashing in the  
temperature displays.  
^ Check whether ventilation gaps have Check the temperature displays about  
been covered over or become too  
dusty.  
6 hours after switching on the appli-  
ance. The display will not show a tem-  
perature until the temperature in the ap-  
pliance has reached a certain level.  
^ Check whether, the metal grille (heat  
exchanger) at the rear of the appli-  
ance has become too dusty.  
. . . the following messages show in  
^ The door has been opened too fre-  
quently, or a large amount of fresh  
food has been put in at once for  
freezing.  
the temperature display "F0" to "F5".  
There is a fault. Call the Miele Service  
Department.  
^ Check that the doors have been  
properly closed.  
. . . the following message appears in  
the temperature display: "nA" .  
The freezer section temperature has  
risen too high at some point during the  
last couple of days because of a power  
cut.  
. . . food has frozen together.  
Use a blunt instrument, e.g. a spoon  
handle or plastic scraper to carefully  
prise it apart.  
^ Press the alarm button whilst "nA"  
shows in the display.  
. . . the alarm sounds and the freezer  
section temperature display flashes.  
The temperature display will show the  
warmest temperature recorded in the  
freezer section during the power cut.  
^ Has the freezer section door been  
open for longer than 60 seconds?  
The temperature has risen above the  
temperature set because  
Depending on the temperature dis-  
played you should check the condition  
of food in the freezer. If it has defrosted  
or started to defrost check that it is still  
safe to use and if so use it as soon as  
possible. Defrosted food may only be  
re-frozen after it has been cooked.  
^ the freezer section door has been  
opened too frequently, or large  
amounts of fresh food have been put  
in at once for freezing.  
^ the ventilation gaps are blocked.  
The warmest temperature will show in  
the display for about 1 minute. The ac-  
tual current temperature in the freezer  
section will then show in the display  
again.  
^ there has been a lengthy interruption  
to the power supply.  
Once the problem has been resolved  
the temperature display for the freezer  
will light up constantly and the alarm  
will go off.  
31  
 
Problem solving guide  
. . . the super freeze or super cool in-  
dicator light is not lit up although the  
appliance is working.  
^ Unscrew the bulb and replace it with  
a new one.  
Bulb specification:  
220 240 V, max. 25 W, E 14 fitting  
The indicator light is defective. Call the  
Miele Service Department.  
. . . the appliance will not switch off or  
the temperature cannot be adjusted.  
The safety lock has been activated.  
. . . the interior light in the refrigerator  
section is not working.  
^ Was the refrigerator section door left  
open for too long? The lighting  
switches itself off automatically after  
approx. 15 minutes.  
^ Screw the new bulb into the connec-  
tion. Ensure it goes in correctly.  
^ Replace the cover by clipping it in at  
the rear and then pressing it in at the  
sides.  
If this is not the case, then the bulb is  
defective:  
^ Disconnect the appliance from the  
mains. Switch off at the wall and with-  
draw the plug from the socket (pull  
by the plug not the cable), or discon-  
nect the mains fuse or remove the  
screw-out fuse in countries where this  
is applicable.  
. . . the floor of the refrigerator sec-  
tion is wet.  
The drain hole is blocked.  
^ Clean the condensate channel and  
drain hole.  
If you still cannot remedy the fault  
having followed these suggestions,  
then contact the Miele Service De-  
partment.  
To prevent unecessary loss of tem-  
perature it is advisable not to open  
the doors while waiting for the appli-  
ance to be serviced.  
^ Press the sides of the lamp cover in-  
wards, disengage the cover and  
unclip it at the rear.  
32  
 
After Sales Service  
In the event of a fault which you cannot  
correct yourself, or if the appliance is  
under guarantee please contact:  
Your Miele Dealer  
or  
The Miele Service Department  
(see back cover for address).  
When contacting the Service Depart-  
ment, please quote the model and se-  
rial number of your appliance, both of  
which are shown on the data plate.  
Please note that telephone calls may  
be monitored and recorded to im-  
prove our service.  
33  
 
 
Electrical connection  
Electrical connection U.K.  
Important  
The appliance is supplied with a mains  
cable and moulded plug ready for  
connection to an a.c. single phase  
220 240 V 50 Hz supply.  
The wires in the mains lead are col-  
oured in accordance with the following  
code:  
Green/yellow = earth  
The fuse rating is 13 amps.  
Blue  
Brown  
= neutral  
= live  
All electrical work should be carried  
out by a suitably qualified and com-  
petent person in accordance with lo-  
cal and national safety regulations.  
Connection should be made via a  
fused plug and suitable switched  
socket which is easily accessible.  
For extra safety it is advisable to in-  
stall a residual current device (RCD)  
with a trip current of 30 mA (in  
As the colours of the wires in the mains  
lead of this appliance may not corre-  
spond with the coloured markings  
identifying the terminals in your plug,  
proceed as follows:  
The wire which is coloured green and  
yellow must be connected to the termi-  
nal in the plug which is marked with the  
letter E or by the earth symbol (z) or  
coloured green or green and yellow.  
accordance with DIN VDE 0664,  
VDE 0100, Section 739).  
The wire which is coloured blue must  
be connected to the terminal which is  
marked with the letter N or coloured  
black.  
Do not connect the appliance to the  
mains electricity supply by an extension  
lead. Extension leads do not guarantee  
the required safety of the appliance  
(e.g. danger of overheating).  
The wire which is coloured brown must  
be connected to the terminal which is  
marked with the letter L or coloured red.  
The appliance must not be connected  
to an inverter and must not be used  
with a plug adapter as these can cause  
damage to the appliances electronic  
unit.  
WARNING  
THIS APPLIANCE MUST BE  
EARTHED  
34  
 
 
Electrical connection  
Non-rewireable plugs (BS 1363)  
If this machine is fitted with a  
non-rewireable plug, the following  
information applies:  
If the socket outlets are not suitable for  
the plug supplied with this product, it  
must be cut off and an appropriate plug  
fitted.  
The fuse carrier and the fuse should be  
removed from the old plug and dis-  
posed of. The old plug should then be  
disposed of and on no account be in-  
serted into any socket elsewhere in the  
house (electric shock hazard).  
The fuse cover must be re-fitted when  
changing the fuse, and if the fuse cover  
is lost, the plug must not be used until a  
suitable replacement is obtained. The  
colour of the correct replacement cover  
is that of the coloured insert in the base  
of the plug, or the colour that is em-  
bossed in words in the base of the plug  
(as applicable to the design of the plug  
fitted).  
The correct fuse rating of the replace-  
ment fuses that are ASTA approved to  
BS 1362 should be fitted. Replacement  
fuse covers may be purchased from  
your local electrical supplier, or Miele  
Service agent.  
35  
 
Installation  
off for too long causing the internal tem-  
perature in the appliance to rise with  
the risk of food deteriorating and going  
off.  
Appliances without side wall heating  
must not be installed "side-by-side"  
next to another refrigerator or  
freezer.  
Ventilation  
Location  
Air at the rear of the appliance gets  
warm. To ensure sufficient ventilation  
the ventilation gaps must not be cov-  
ered over. The air inlet and outlet must  
not be covered or blocked in any way.  
They should be dusted on a regular  
basis.  
It should not be installed where it is ex-  
posed to direct sunlight or directly adja-  
cent to a heat-producing appliance  
such as an oven or a radiator. The ap-  
pliance should be installed in a dry well  
ventilated room.  
The room temperature should not go  
above or below the climate range for  
which the appliance is designed. The  
higher the ambient temperature of the  
room the more energy the appliance re-  
quires to operate.  
Fitting the handles  
If the door hinging does not require  
changing the handles should now be  
fitted to the appliance doors.  
Do not place any appliance which  
gives off heat, such as a toaster or  
microwave oven on top of this appli-  
ance, as this would increase the ap-  
pliances energy consumption.  
Climate range  
The appliance is designed for a use  
within certain climate ranges (ambient  
temperatures) and should not be used  
outside this range. The climate range of  
this appliance is stated on the data  
plate inside the appliance.  
Climate range  
Ambient room tempera-  
ture  
^ Secure handle a to the holes in the  
door using the screws marked b.  
SN  
N
ST  
T
+10 °C to +32 °C  
+16 °C to +32 °C  
+18 °C to +38 °C  
+18 °C to +43 °C  
Operating in a room which is too cold  
will cause the cooling system to switch  
36  
 
 
Installation  
Installation  
Aligning the appliance  
^ Remove any cable clips from the rear  
of the appliance.  
^ Check that all parts at the rear of the  
appliance are unhindered. Remove  
any hindrance.  
^ Carefully push the appliance into po-  
sition. The rear of the appliance can  
be placed directly against a wall.  
^ To align the appliance adjust the feet  
using the spanner supplied.  
37  
 
 
Changing the door hinging  
The appliance is supplied right hand  
hinged. If left hand door hinging is re-  
quired follow the instructions below.  
Re-fit all parts on the opposite side  
^ Open the lower appliance door.  
^ Remove the cover plate a.  
^ Unscrew bearing block b and place  
it on the other side (see illustration).  
^ Use a screwdriver to lever the plinth  
fascia a out, then pull it forwards  
and off.  
^ Unscrew upper hinge pin c using  
the spanner supplied and refit on the  
oppositie side.  
^ Use a screwdriver to remove cover  
b, then close the door.  
^ Place cover plate a on the other  
side.  
^ Remove screw c completely.  
^ Exchange cover i in the middle of  
the appliance with hinge bracket e.  
To do this:  
Undo screws h, pull cover i and  
hinge bracket e off to the side, turn  
around and refit into position on the  
opposite side.  
^ Pull door support d together with  
hinge pin e downwards, then tilt it  
forwards and take it off.  
^ Open the lower appliance door, move  
it downwards and take it off.  
^ With the upper door g closed, pull  
hinge pin f downwards to remove it.  
^ Open the upper door, and pull it  
downwards and off.  
38  
 
 
Changing the door hinging  
^ Pull bearing bush d downwards out  
of hinge bracket e and refit it from  
above into the hinge bracket.  
^ Use a screwdriver to remove spacer  
g and refit it on the opposite side.  
Changing over the door handle:  
^ Remove covers m at the front and  
slide off to the side.  
^ Unscrew handle k. Refit handle and  
stoppers l on the opposite side.  
^ Slide covers m into position making  
sure they engage correctly.  
Refitting the doors:  
^ Remove plugs j from door bearing  
bushes in the doors and refit on the  
opposite side.  
^ Turn door support b around, pull  
hinge pin a out, and refit on the op-  
posite side.  
^ Hang the upper appliance door on  
hinge pin c, and close the appliance  
door.  
^ Fit both parts into hinge plate f. To  
do this push hinge pin a through  
hinge plate f into door support b.  
Swing door support out, push up-  
wards and re-assemble with screw  
c.  
^ Push middle hinge pin f from below  
through hinge bracket e into the up-  
per appliance door.  
^ Check that the door is correctly  
aligned. If necessary align it using  
the long slots in hinge bracket e.  
^ Align the lower door with the appli-  
ance housing using the long slot in  
hinge plate f. Then tighten screw c.  
^ Hang the lower door in hinge bracket  
e then close the appliance door.  
^ Refit plinth fascia d pushing it firmly  
into position.  
In the following illustration the lower  
door is not shown in the closed posi-  
tion to make it easier to see what  
happens next.  
^ With the lower door open, secure  
cover e to the front of the plinth fas-  
cia.  
39  
 
Building in the appliance  
The air inlet and outlet must not be  
covered or blocked in any way.  
They should be dusted on a regular  
basis.  
When built into a kitchen run (max.  
depth 580 mm) the appliance can be  
installed directly next to a kitchen furni-  
ture housing unit. The appliance door  
b will protrude in front of furniture  
fronts at the sides by 34 mm and by 51  
mm in the middle of the door. This en-  
ables the doors to be opened and shut  
without being obstructed.  
When installed next to a wall c a dis-  
tance of approx. 36 mm is needed on  
the hinge side between the wall and the  
appliance, so that the doors and the  
handles have sufficient space for open-  
ing.  
When securing to adjoining furniture  
d or if a spacer is fitted between the  
appliance and the wall, please note the  
following:  
The appliance can be installed in a  
kitchen run. To match the height of the  
rest of the kitchen, the appliance can  
be fitted with a suitable top box a.  
^ Ensure that the doors have sufficient  
space for opening fully after the ap-  
pliance has been secured.  
A ventilation gap of at least 50 mm  
depth must be allowed for behind the  
appliance for air to circulate.  
The cross section of the air outlet under  
the room ceiling must be at least 300  
cm2 to ensure that air can circulate  
without hindrance. Otherwise the appli-  
ance has to work too hard resulting in  
an increase in electricity consumption.  
The larger the cross section, the more  
efficient the appliance.  
^ Do not drill within the area marked  
with criss cross pattern as this  
would damage insulated parts of the  
appliance.  
^ To secure the appliance to adjoining  
kitchen furniture use self-tapping  
screws. The depth of the screw must  
not exceed 10 mm. See small illustra-  
tion.  
40  
 
 
41  
 
42  
 
43  
 
Änderungen vorbehalten / 0903  
M.-Nr. 05 910 950 / V01  
KF 7544 SND ed-3  
Dieses Papier besteht aus 100 % chlorfrei gebleichtem Zellstoff und ist somit umweltschonend.  
 

Miele Clothes Dryer 07 220 280 User Manual
Milan Technology Switch CERTXFX01 User Manual
Milwaukee Home Safety Product 2216 20 User Manual
Nady Systems Microphone OHCM 20 User Manual
National Instruments Network Card NI PXIe 1065 User Manual
Nikon Camera Lens 1987 User Manual
Nortel Networks Cordless Telephone C4010 C4010Ex User Manual
Olympus Camera Lens VT521901 User Manual
Omega Engineering Thermometer HH64A User Manual
Panasonic Security Camera KX TD816NZ KX TD1232NZ User Manual