NEC Flat Panel Television LCD4020 2 User Manual

NEC Display Solutions of America, Inc.  
LCD4020-2 Installation Guide  
40” LCD Display  
Rev 1.0  
Contents:  
Product Description and Notes  
Tilt Angle and Rotation  
Page 1  
Page 1  
Page 2  
Ventilation Requirements  
Display Dimensions  
Front, Top & Right Side  
Rear & Bottom  
Page 3  
Page 4  
Page 5  
Page 6  
Page 7  
Page 8  
Page 9  
Display Dimensions w/Optional Speakers and Stand  
Optional Table Top Stand Dimensions  
Optional Speaker Dimensions  
Dimensions with Optional Wall Mount  
Control Codes  
Product Description  
Type:  
LCD Display  
1366 x 768  
16:9  
Screen Surface: Anti-Reflective  
Resolution:  
Aspect Ratio:  
FCC:  
Dimensions:  
Weight:  
36.2”(W) x 21.0”(H) x 5.5”(D)  
64.8 lbs  
Class B  
Power Consumption: 175W (max)  
BTU’s:  
597 BTU/hour  
Notes  
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to  
be a step-by step procedure for installation.  
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local  
building codes. All mounts should make secure contact to wood studs.  
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to  
fill the screen using the menus (see “Aspect Modes” in menus and user manual).  
Distances are in inches, for millimeters multiply by 25.4.  
Distances may vary ±5%.  
Tilt Angle and Rotation  
Below are the maximum angles that the monitor can be tilted in the landscape position only.  
Landscape 20deg  
Max. 20 deg  
LCD4020-2  
Page 1 of 9  
 
NEC Display Solutions of America, Inc.  
LCD4020-2 Installation Guide  
40” LCD Display  
Rev 1.0  
Display dimensions  
(PANEL DISPLAY AREA)  
LCD4020-2  
Page 3 of 9  
 
NEC Display Solutions of America, Inc.  
LCD4020-2 Installation Guide  
40” LCD Display  
Rev 1.0  
Display dimensions (cont.)  
100mm MOUNTING HOLE PATTERN  
AC Inlet  
Power Switch  
LCD4020-2  
Page 4 of 9  
 
NEC Display Solutions of America, Inc.  
LCD4020-2 Installation Guide  
40” LCD Display  
Rev 1.0  
Dimensions with optional speakers and stand  
LCD4020-2  
Page 5 of 9  
 
NEC Display Solutions of America, Inc.  
LCD4020-2 Installation Guide  
40” LCD Display  
Rev 1.0  
Optional Table Top Stand Dimensions (ST-4020)  
Table Top Stand  
ST-4020  
3.52  
3.48  
4.94  
0.83  
0.83  
0.69  
13.00  
LCD4020-2  
Page 6 of 9  
 
NEC Display Solutions of America, Inc.  
LCD4020-2 Installation Guide  
40” LCD Display  
Rev 1.0  
Optional Speaker Dimensions (SP4020-4620)  
Optional Speakers  
SP4020-4620  
0.79  
INPUT TERMINAL  
LCD4020-2  
Page 7 of 9  
 
NEC Display Solutions of America, Inc.  
LCD4020-2 Installation Guide  
40” LCD Display  
Rev 1.0  
Dimensions with Optional Wall Mount Kit (WMK3260-L)  
LCD4020-2  
Page 8 of 9  
 
NEC Display Solutions of America, Inc.  
LCD4020-2 Installation Guide  
40” LCD Display  
Rev 1.0  
Control Codes  
Function  
Code Data  
POWER  
ON  
OFF  
VGA (15pin HD)  
RGBHV  
DVI  
HDMI__________  
VIDEO (Composite)  
DVD/HD  
S-Video  
TV (Analog)  
TV (Digital)  
Option  
01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 73 0D  
01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 76 0D  
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 31 03 73 0D  
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 32 03 70 0D  
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 33 03 71 0D  
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 34 03 76 0D  
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 35 03 77 0D  
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 43 03 01 0D  
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 37 03 75 0D  
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 39 03 7B 0D  
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 41 03 03 0D  
01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 44 03 06 0D  
01 30 41 30 45 30 41 02 30 30 38 44 30 30 30 31 03 09 0D  
01 30 41 30 45 30 41 02 30 30 38 44 30 30 30 32 03 0A 0D  
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 31 03 07 0D  
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 33 03 05 0D  
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 34 03 02 0D  
01 30 41 30 45 30 41 02 30 32 31 41 30 30 30 35 03 03 0D  
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 31 03 70 0D  
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 32 03 73 0D  
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 33 03 72 0D  
01 30 41 30 45 30 41 02 30 32 37 30 30 30 30 34 03 75 0D  
01 30 41 30 45 30 41 02 30 30 31 45 30 30 30 31 03 01 0D  
01 30 41 30 45 30 41 02 30 30 30 32 30 30 30 31 03 77 0D  
01 30 41 30 45 30 41 02 30 30 30 32 30 30 30 32 03 74 0D  
INPUT SWITCH  
AUDIO MUTE  
ON  
OFF  
PICTURE MODE sRGB  
HIBRIGHT  
STANDARD  
CINEMA  
SCREEN MODE: NORMAL  
FULL  
WIDE  
ZOOM  
EXECUTE  
OFF  
AUTO SETUP  
FILM MODE  
AUTO  
NOTE: Contact your NEC rep for codes not listed.  
NOTE: Use a cross/reverse/null modem cable.  
Cable Connection  
Communication Protocol:  
Interface:  
RS-232C  
Parity:  
None  
Communication: Asynchronous  
Stop Bit: 1 bit  
Baud Rate:  
Data Length:  
9600 bps  
8 bits  
Communication Code: Hex  
PC Control Connector (D-Sub 9P)  
NOTE: If so desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection.  
These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND).  
LCD4020-2  
Page 9 of 9  
 

Miller Electric Bicycle Accessories Digital Elitet User Manual
NAD CD Player C 542 User Manual
Nady Systems Headphones HM 20U User Manual
NewAir Humidifier AF 320 User Manual
NordicTrack Treadmill 83129882 User Manual
Omnimount Indoor Furnishings 200 User Manual
Omnimount TV Mount OM10056 User Manual
Onkyo Car Stereo System TX 8555 User Manual
Oregon Scientific Heart Rate Monitor SE188 User Manual
Panasonic Fax Machine KX FLM651 User Manual