New Holland
Tedders/ Rake Tedder
157 163 H5270 / 255
TEDDER SPECIFICATIONS
157
163
163
H5270
MANUAL FOLD
4
HYDRAULIC FOLD
4
HYDRAULIC FOLD
Number of rotors
Tines per rotor
2
6
6
7
6
6
Overall width in operating position, ft. in. (m)
Tedding width, ft. in. (m)
Transport width, ft. in. (m)
Weight, lbs. (kg)
10' 2" (3.10)
8' 6" (2.60)
8' 0" (2.40)
441 (200)
15 x 6 x 6
17' 8" (5.38)
16' 5" (5.0)
9' 2" (2.79)
986 (447)
15 x 6 x 6
17' 8" (5.38)
16' 5" (5.0)
9' 2" (2.79)
950 (431)
15 x 6 x 6
25' 7" (7.8)
27' 7" (8.4)
9' 10" (3)
1874 (850)
Two 18 x 8.50 - 8 center/
Four 16 x 16.50 - 8 outer
35 (26.1)
Tires
PTO Tractor requirement, hp (kW)
PTO slip clutch
Tractor attachment
Tractor remote valves required
Safety Tow Chains
15 (11)
Standard
3-point
none
20 (15)
Standard
Towed
none
Standard
20 (15)
Standard
Towed
one
Standard
Standard
Towed
one
N/A
Standard
RAKE TEDDER SPECIFICATIONS
Number of rotors
255
2
Arms per rotor
6
Tines per arm
2 double tines
10' 6" (3.20)
Tedding width, ft. in. (m)
Raking width, ft. in. (m)
Transport width, in. (m)
Weight, lbs. (kg)
10' 6" (3.20) to 13' 1-1⁄2" (4.00)
10 (3.05)
897 (407)
Tires
15 X 6 X 6, 4-ply
Tractor requirement, hp (kw)
30 (22.3) and 540 rpm PTO
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 1of 1
|