Operation Manual
R1.2 - Feb 2010
15-45x60 Spotting Scope
105 Sparks Ave., Toronto, ON, M2H 2S5, Canada
1. Introduction
Congratulations on your purchase of a Spotter 15-45x60 spotting
scope. The Spotter is an amazing scope designed for hunting,
shooting, wildlife observation and other outdoor activities.
Optical Quality
The Spotter will impress you with its optical excellence, featuring
Broadband fully multi-coated optics for bright, detailed images.
Caution:
Spotting scopes are not intended for looking at the sun, or any
other intense light source. Such viewing could damage the retina
and cornea of your eyes—even to the point of causing blindness.
2. SPECIFICATION
Magnification Range
Objective lens diameter
Prism
15-45 x
60 mm
BAK 4
Coating
MC
FOV @1000 m
FOV @1000 yd
Eye relief
38-19 m
115-57 ft
15-18 mm
915 g
Weight
Dimensions, mm
335x170x75
1
3. Spotter 15-45x60
K
L
G
D
C
H
F
A
3.1 . DELIVERY SET
Q-ty
Spotting Scope
1
2
1
1
1
1
Objective lens cover
Sliding dew shield to reduce glair
Carrying case and tripod
Manual
Universal Digital Adapter (optional)
2
4. OPERATION INSTRUCTIONS
Set Up and Mounting
1) Spread the tripod legs (A) and set the tripod on a firm support.
Loosen the adjustment screw (H) to place mounting platform
(C) in horizontal position, then rotate the screw to lock
mounting platform.
2) Position mounting shoe (D) of the spotting scope body on the
platform (C) then tighten mounting screw (E) to firmly lock
spotting scope body on the platform.
3) Remove protective lens cap (F) on the objective (G) lens.
5. STARTING OBSERVATION
Usage with Fixed Power Eyepiece
1. Loosen the adjustment screw (H) and point your scope
objective lens to the target you want to view.
2. Adjust the focus knob (K) until you get the clear image from
your eyepiece lens.
Usage with zoom eyepiece
1. Loosen the adjustment screw (H) and point your scope
objective lens to the target you want to view.
2. Rotate the zoom ring (L) of the eyepiece to the lowest
magnification.
3. Adjust the focus knob (K) until you get the clear image from
your eyepiece lens.
4. Rotate the zoom ring (L) to the desired magnification and re-
focus with focus knob (K) if necessary.
3
6. CARE FOR YOUR SPOTTING SCOPE
•
To clean the lenses, use a soft bristle brush to whisk off
dust and dirt and then use soft cloth moisture with
alcohol. Wipe lenses from center outward and avoid
touching the lens, as fingerprints will smear the lens.
To clean body parts, use a soft cloth with warm water and
a mild soap to remove dirt.
Do not dismantle the spotting scope or the eyepieces. If
they need repair or adjustment, please contact the dealer
in your country.
•
•
7. WARRANTY
NEWCON warrants this product against defects in material and
workmanship for one year from the date of the original purchase,
but no more than 12 months from the date of manufacturing.
Longer warranty is available, subject to the terms of the specific
sales contract. Should your product prove to be defective during
this period, please deliver the product securely packaged in its
original container or an equivalent, along with the proof of the
original purchase date.
Newcon will repair (or at its option replace with the same or
comparable model), the product or part thereof, which, on
inspection by Newcon, is found to be defective in materials or
workmanship.
What This Warranty Does Not Cover:
NEWCON is not responsible for warranty service should the
product fail as a result of improper maintenance, misuse, abuse,
improper installation, neglect, damage caused by disasters such as
fire, flooding, lightning, improper power supply, or service other
than by a NEWCON Authorized Service.
Postage, insurance, and shipping costs incurred while presenting
your product for warranty service are your responsibility.
4
8. CUSTOMER SUPPORT
Should you experience any difficulties with your NEWCON
OPTIK product, consult the enclosed manual. If the problem
remains unresolved, contact our customer support department at
(416) 663-6963 or toll free at 1-877-368-6666. Our operating
hours are 9am-5pm, Monday - Friday, Eastern Standard Time.
At no time should equipment be sent back to Newcon without
following the instructions of our technical support department.
NEWCON OPTIK accepts no responsibility for unauthorized
returns.
To locate NEWCON Authorized Dealer call:
Tel: (416) 663-6963 Fax: (416) 663-9065
Email: [email protected]
Defective products should be shipped to:
From the USA only:
2331 Superior Ave. Cleveland, OH 44114 USA
From all other countries:
105 Sparks Ave., Toronto, ON M2H 2S5, CANADA
5
9. QUALITY CERTIFICATE
The binoculars serial number_____________________________
Complies with all technical specifications and has passed the
inspection.
Date of production: _________________________________
Quality Inspector: __________________________________
Quality Assurance Seal
NEWCON OPTIK™ 2010
Printed in Canada
6
|