Nextar Digital Photo Frame N7 207 User Manual

 
Introduction  
Your new Digital Photo Frame lets you view digital  
pictures from memory cards easily and quickly.  
No computer or printer is needed  
Includes convenient slide show mode, which starts  
automatically when the Frame is turned on.  
Supports many popular memory card types.  
Easy to take with you to share photos with family and  
friends anywhere.  
A step beyond the traditional photo frame. View tens or  
even hundreds of digital photos without the need to  
pay for printing.  
1Features  
7 inch TFT LCD  
Supports Secure Digital (SD), Multimedia Card (MMC),  
Memory Stick (MS) memory card formats and USB  
JUMP DRIVE  
View the pictures from memory cards directly  
Resolution: 480X234 pixels  
Supports high-resolution photos  
Automatic start of slide show  
3
 
 
2Packaging Check List  
Digital Photo Frame  
User Manual  
Quick Start Guide  
AC Adaptor  
3Specifications  
Panel Size  
7 inches  
Resolution  
480X234  
Brightness  
200 CD/M²  
300  
Contrast  
View Angle (U/D/L/R) (CR10)  
Response Time  
40/60/60/60  
15ms Ton  
16:9  
Screen Size Mode  
File Format Type  
Max.Photo Size  
JPEG  
10 mega pixels  
5V DC  
Power Requirement  
Power Consumption  
Operating Temperature  
Storage Temperature  
<10 W  
14~158(-10~70)  
-4~176(-20~80)  
4
 
 
Product Diagram  
A. Top View  
1.  
Button  
among Pan Scan, Fill, Original  
and Auto Fit.  
Pause or resume the playback.  
2. Button  
Go to the previous picture.  
3. Button  
Go to the next picture.  
4. Rotate Button  
Rotate the current picture.  
5. MODE Button  
Change the display mode  
Change the aspect ratio  
between 16:9 and 4:3. (Press  
and hold for a moment).  
6. P-SAVE Button  
Enter the power save mode.  
Then press it again to exit the  
power save mode.  
B. Front View  
1. LCD Screen  
 
 
C. Rear View  
1. Stand  
Support the Digital Photo Frame.  
D. Side View  
1. SD/MS/MMC Card Port  
Insert SD/MS/MMC card into this port.  
Or pull out the SD/MMC/MS card from the port.  
2. USB Port  
Connect USB device, such as USB flash disk.  
3. DC 5V IN  
Connect the supplied adaptor.  
6
 
 
Using Your Digital Photo Frame  
Install the stand for tabletop display. Connect the AC adaptor.  
Insert a memory card in the Digital Photo Frame (with the card’s  
electrical contacts towards the front of the unit.). A slide show will  
begin automatically.  
To enter the power save, press the P-SAVE button.  
Press the  
button, the word Pause will appear on the screen  
briefly and the slide show will be stopped. The current photo will  
remain on the screen until the button is pressed again, at which time  
the slide show will resume.  
To display the previous or next picture, press the ꢀꢁ button.  
The Rotate button allows photos to be turned proper viewing. Press  
repeatedly to rotate the current picture clockwise:  
90° 180° 270°.  
Viewing Modes  
Press the MODE button to select display mode: Pan Scan, Fill,  
Original and Auto Fit. Press the MODE button and hold for a moment  
to change the aspect ratio between 16:9 and 4:3.  
File Saving  
Photos must be saved in the JPEG format in order to be viewed on  
the Digital Photo Frame. Nearly all digital cameras will save in this  
format by default. Photos that have been saved with certain image  
editing programs can fail to display properly.  
7
 
 
Technical Notes  
1. Your Digital Photo Frame is a sophisticated electronic device.  
Do not drop or subject the unit to jarring or strong vibrations.  
2. Avoid placing the Digital Photo Frame in areas of high humidity  
or where it might be subjected to splashing.  
3. The panel is made of plastic and can be easily damaged. Avoid  
sharp objects.  
4. Use only a soft dry cloth to clean the screen.  
Question/Troubleshooting Guide  
This chapter presents some troubleshooting problems you may  
encounter while using the device. Even if the following guide fails to  
solve your problem, please do not disassemble the device, but leave  
the problems to professional staff.  
1.Question: What kind of photos does this device’s supports?  
Answer: The Frame will display digital photos that are stored in the  
JPEG format which is the standard format for nearly all digital  
cameras. Some cameras allow images to be stored as TIFF or with  
the Frame.  
RAW files as well as JPEG. Only the JPEG format is compatible  
2.Question: What should I do if the system does not respond  
when the power is turned on?  
Answer: Make sure the unit is properly connected to a power source.  
Then turn it off, reconnect the power and turn it on again.  
8
 
 
3.Question: Why is the memory card not recognized?  
Answer: The memory card might be inserted rearwards or is not  
pushed in far enough. After inserting the memory card in the right  
direction, if the card still cannot be read, please turn off the unit and  
then power it again.  
9
 
This device complies with part 15 of the FCC Rules. Operation is  
subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received, including  
interference that may cause undesired operation.  
Note: This equipment has been tested and found to comply with  
limits for Class B digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the  
following measures:  
1. Reorient or relocate the receiving antenna.  
2. Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
3. Consult the dealer or an experience radio/TV technician for help.  
10  
 
Nextar™ a trademark of Nextar (Hong Kong) Limited  
Nextar may find it necessary to modify, amend or  
otherwise change or update this manual.  
We may reserve the right to do this at any time, without  
any prior notice.  
All specifications and features are subject to change  
without notice.  
© NEXTAR, INC. AND ITS AFFILIATES  
1661 FAIRPLEX DRIVE  
LA VERNE, CA 91750. USA  
All products distributed by Nextar, Inc.  
Unless otherwise indicated  
Made in China  
© 2005 Nextar (Hong kong) Limited. Nextar (Hong Kong) Limited  
claims trademark rights in NextarTM. All other brand names,  
product names and trademarks are the property of their  
registered owners.  
11  
 

Milwaukee Cordless Saw 2625 20 User Manual
MTD Log Splitter 24642 8 User Manual
NEC Home Theater System TheaterSync Video Processor User Manual
Nortel Networks Cordless Telephone 1120E 1140E User Manual
Novatel Wireless Network Card GU 90023775 User Manual
Omega Juicer VRT400 User Manual
Onkyo DVD Player DV SP504E User Manual
Oster Oven Oster Convection Countertop Oven User Manual
Panasonic Scanner KV S2065W User Manual
Panasonic Vacuum Cleaner MC E761 User Manual