NuTone Ventilation Hood QT1000 User Manual

Architectural & Engineering Specifications  
March 2004  
QuieTTest Twin  
Blower Ventilator  
(For Ceiling Use)  
DESCRIPTION  
Large capacity NuTone QuieTTest ventilation unit for  
light commercial or large residential settings. Also  
for in-line use as part of a central ventilation system.  
Corrosion resistant galvanized steel fan housing is  
lined with sound-deadening foam for quiet operation.  
Motor and twin blowers dynamically balanced  
for smooth, quiet operation.  
MODEL: QT1000  
Vents horizontally or vertically with 6" x 19" duct.  
Duct collar with quiet backdraft damper included.  
Slots on housing sides provide alternative  
mounting methods.  
Wiring knockouts located on the top and back  
of the housing.  
NuTone wall switch sold separately.  
Refer to NuTone's catalog for a complete line  
of accessories to effectively adapt this fan to your con-  
struction requirements.  
DESIGN FEATURES  
Air Delivery:  
Vented Horizontally: 1030 CFM  
(486 L/s) at .1"(25 Pa) S.P.  
Vented Vertically: 1040 CFM  
(491 L/s) at .1"(25 Pa) S.P.  
Vented Horizontally: 7.0 Sones.  
Vented Vertically: 6.5 Sones.  
Housing: 211116" L x 15716" W x  
14716" D.  
Sound Level:  
Dimensions:  
ARCHITECT’S SPECIFICATIONS  
Twin-Blower Ventilator shall be NuTone Model QT1000  
as manufactured by NuTone according to listed  
specifications. Unit shall ventilate 1030 CFM vented  
horizontally or 104 CFM vented vertically at .1" S.P.  
at a sound leve rating of 7.0 sones vented horzontally  
or 6.5 sones vented vertically.  
Grille: 2338" L x 1718" W.  
Material & Finish: Housing: .033 (20 gauge) galvanized  
steel with sound-deadening foam lin-  
ing.  
Housing shall be 2111/16" long x 157/16" wide x 147/16" deep  
and shall connect to 6" x 19" duct.  
Grille: .0279 (22 gauge) cold rolled  
steel with white baked enamel finish.  
1
Motor:  
4
H.P., 6 Pole Type P.S.C.,  
1050 RPM, 3.2 amps at 120v, 60 Hz.  
Rated for continuous duty.  
Two (2) 12" bore steel blowers: 1-cw, 1-  
ccw. 74364" O.D. x 4" deep.  
6" x 19". Duct collar with damper  
included.  
Blower Wheel:  
Duct Size:  
CERTIFIED TEST DATA  
HVI-2100 CERTIFIED RATINGS comply with new testing  
technologies and procedures prescribed by the Home  
Ventilating Institute, for off-the-shelf products, as they are  
available to consumers. Product performance is rated at 0.1  
in. static pressure, based on tests conducted in AMCA's  
state-of-the-art test laboratory. Sones are a measure of  
humanly-perceived loudness, based on laboratory measure-  
ments. This NuTone model is listed by Underwriters' Laboratories  
Inc. and Certified by the Canadian Standards Association (CSA.)  
INSTALLATION  
Not for use in kitchens.  
Unit is designed for optional mounting methods in a ceil-  
ing application utilizing slotted mounting brackets.  
Grille attaches with screws.  
Controls purchased separately.  
Installation Instructions are provided with each unit.  
 

MXL Microphone FR 304 User Manual
National Instruments Network Card NI SPEEDY 33 User Manual
Navman Fish Finder 4432 User Manual
Network Technologies Network Card ASI IP GTW User Manual
NordicTrack Treadmill 4200 R User Manual
Nostalgia Electrics Kitchen Grill RFH 900 User Manual
NXP Semiconductors Network Card PCA2125 User Manual
Omega Switch C4EIT EIT User Manual
Panasonic Telephone KX G2200A User Manual
Patton electronic Network Card 1004ABRC User Manual