Fuser
Installation Instructions
3. Pull the fuser lock lever as shown to unlock the
fuser.
Caution! The fuser is very HOT after the
printer has been printing. Let the
printer cool down at least 10 minutes
before attempting to replace it.
To replace the fuser:
1. Turn off the printer.
Note: If the hard disk drive is installed in your
printer, press the SHUTDOWN/RESTART
button for several seconds before
turning the printer off.
4. Grasp the fuser handle and lift the fuser out of
the printer. Dispose of it in accordance with local
regulations.
2. Open the top cover.
© 2005 Oki Data Americas, Inc.
58371802
|