User’s Guide
Shop online at
omega.com
e-mail: [email protected]
For latest product manuals:
omegamanual.info
FPUSV4000
FPU4500
FPUSV4000
VARIABLE SPEED PUMP AND
FPU4500 FIXED SPEED PUMP
FPUSV4000 VARIABLE SPEED PUMP AND FPU4500 FIXED SPEED PUMP
®
Thank you for purchasing an OMEGAFLEX FPUSV4000 or FPU4500
pump. We are sure you will be completely satisfied with its
performance. Should you need assistance or have any questions
regarding it's use or installation please call our Customer Service
Department at
1-800-622-2378 or 203-359-1660. On the web you can find us at:
omega.com
e-mail: [email protected]
Table of Contents
Section
Page
General Description .................................................................... 1
Features ........................................................................................ 1
Installation Instructions ............................................................. 1
Tubing Installation/Pump Head Assembly............................ 2
FPUSV4000 Fuse Installation .................................................... 3
FPUSV4000 Motor Brush Replacement ................................... 3
Replacement Parts List................................................................ 4
WARNING
OMEGA Engineering Inc. assumes no responsibility or
liability for chemical compatibility of our tubing in specific
applications. ALWAYS pretest tubing in accordance with
tubing manufacturer's specifications. Tubing that shows
signs of swelling, embrittlement or other deterioration
should not be used.
i
FPUSV4000 VARIABLE SPEED PUMP AND FPU4500 FIXED SPEED PUMP
GENERAL DESCRIPTION
The OMEGAFLEX@ FPUSV4000 variable speed drives are powered by
a DC gearmotor. A specially designed electronic speed control system
converts AC to DC while providing smooth accelerated control over the
entire flow range. The three position on/ off switch allows the user to
maintain speed setting when unit is turned off or reversed. The
FPU4500 are fixed speed AC units.
FEATURES
*1. Electrical: I 15 VAC, 60HZ
2. Reversible Variable Speed Control for Variable Flowrates.
3. Maximum and Minimum Speed Control Adjustment.
*4. Factory Preset Flowrate: 2000 ml/min.
S. Replaceable Motor Brushes. (Replacement instructions page 5.)
6. External Fuse Holder. (Fuse replacement instructions page 5.)
INSTALLATION INSTRUCTIONS
1. POWER REQUIREMENTS: Voltage and frequency of power supply
must be the same as shown on unit.
2. WIRING CONNECTIONS: All wiring and electrical connections
must comply with local and national electrical codes.
3. MOUNTING: FPU4500 Case enclosed model may be placed on any
flat surface assuring space is provided at the back of the case for air
circulation through ventilation holes. FPU4500 Bracket or Case
mount assuring space provided for air flow. Do not allow tubing to
be crimped.
4. MOUNTING LOCATION: Pump should be placed in a dry location
with adequate cooling provided. The ambient temperature should
not exceed 35°C.
WARNING
This unit should not be used in outdoor or hazardous
locations
CAUTION
Motor life will be drastically reduced if left in the stalled
position for extended periods.
1
FPUSV4000 VARIABLE SPEED PUMP AND FPU4500 FIXED SPEED PUMP
TUBING INSTALLATION/PUMP HEAD ASSEMBLY
Inspect all tubing regularly and replace if any sign of deterioration
occurs. Always wear safety glasses and protective clothing when
working with chemicals. (See Illustrations on page 5)
1 . Disconnect power to the pump.
2. Disconnect the suction and discharge tubing from the pump tubing.
(if the product pumped is not caustic, tubing may be removed by
running pump and pulling on the discharge tube until tubing is
removed. In this case skip steps 4-5)
3. Remove (2) screws (E) to release pump head assembly.
4. Remove tube housing (D) by gently rocking side to side while
pulling off. (in most cases roller bracket should stay on shaft. In the
event that it is removed with the housing, line up flat on shaft with
flat on inside of bracket and push back into place. There is also a
tubing cover ring (A) that should be on up against the motor case.
This is free floating until the tube housing is replaced.)
5. Remove tubing from roller bracket.
6. Clean roller race inside of tube housing, removing any particles that
could damage tubing. Be sure all cleaning solvents are removed prior
to installing new tube.
7. To reassemble, rotate roller bracket assembly so that the rollers are in
the 10:00, 2:00 and 6:00 positions (See Illustration I -I). Lay the tube
over the top rollers and hold the ends together at the 6:00 position.
Put the tube housing (with tube inlet and outlet restraints down)
over the roller assembly and the tube, locating the ends of the tubing
into the tube inlet and outlet restraints.
8. Press tube housing onto shaft while gently pulling down to align
shaft into tube housing bearing. Press tube housing flush to motor
case and replace screws.
CAUTION
Be sure not to twist or leave the tubing pinched while
installing, as this will affect your flow and tubing life.
2
FPUSV4000 VARIABLE SPEED PUMP AND FPU4500 FIXED SPEED PUMP
FOR 4000 CASE MODELS ONLY
FUSE INSTALLATION
(See page 5 for fuse ordering information.)
1. Disconnect power to pump.
2. The fuse holder Is located on the back of the case.
3. Turn knob counterclockwise.
4. Slide the fuse out
5. Remove old fuse and replace with new fuse.
6. Slide back in and push while turning clockwise to lock.
MOTOR BRUSH REPLACEMENT
(See page 5 for brush ordering information.)
1. Disconnect power to pump.
2. Remove case cover by removing 6 screws
3. With a small flat head screw driver remove the brush caps on both
sides of the DC motor
4. Remove old brush and replace with new brush. (Slide in
horizontally)
5. Push metal plate on the end of the brush inside and hold it while
replacing brush cap.
6. Replace case cover.
3
FPUSV4000 VARIABLE SPEED PUMP AND FPU4500 FIXED SPEED PUMP
REPLACEMENT PARTS
Call Customer Service Department at 1-800-622-2378 or 203-359-1660 to
order. Please remember to include the complete model number when
you place your order for replacement parts.
Tube ..................................................................... TU-1225-3856-01
Pump Kit ................................................................ 400-205-000-13
(Includes:Tube Housing w/bearing, cover ring roller bracket assembly
and two screws)
For Case Models Only:
Motor Brushes (2/pack) ...................................... BR- 1140-01 -00
Fuse 5/pack ........................................................... FU- 1127-03-00
4
FPUSV4000 VARIABLE SPEED PUMP AND FPU4500 FIXED SPEED PUMP
NOTES:
5
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and
workmanship for a period of 13 months from date of purchase. OMEGA’s WARRANTY adds
an additional one (1) month grace period to the normal one (1) year product warranty to
cover handling and shipping time. This ensures that OMEGA’s customers receive maximum
coverage on each product.
If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer
Service Department will issue an Authorized Return (AR) number immediately upon phone or
written request. Upon examination by OMEGA, if the unit is found to be defective, it will be
repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting
from any action of the purchaser, including but not limited to mishandling, improper
interfacing, operation outside of design limits, improper repair, or unauthorized modification.
This WARRANTY is VOID if the unit shows evidence of having been tampered with or shows
evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture
or vibration; improper specification; misapplication; misuse or other operating conditions
outside of OMEGA’s control. Components in which wear is not warranted, include but are not
limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various products. However,
OMEGA neither assumes responsibility for any omissions or errors nor assumes
liability for any damages that result from the use of its products in accordance with
information provided by OMEGA, either verbal or written. OMEGA warrants only
that the parts manufactured by the company will be as specified and free of
defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY
KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL
IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF
LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total
liability of OMEGA with respect to this order, whether based on contract, warranty,
negligence, indemnification, strict liability or otherwise, shall not exceed the
purchase price of the component upon which liability is based. In no event shall
OMEGA be liable for consequential, incidental or special damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1)
as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or
activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or
with any nuclear installation or activity, medical application, used on humans, or misused in
any way, OMEGA assumes no responsibility as set forth in our basic WARRANTY/DISCLAIMER
language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from
any liability or damage whatsoever arising out of the use of the Product(s) in such a manner.
RETURN REQUESTS/INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service Department.
BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER MUST OBTAIN AN
AUTHORIZED RETURN (AR) NUMBER FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT
(IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR number should then be
marked on the outside of the return package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and proper packaging to
prevent breakage in transit.
FOR WARRANTY RETURNS, please have
the following information available BEFORE
contacting OMEGA:
1. Purchase Order number under which
the product was PURCHASED,
2. Model and serial number of the product
under warranty, and
3. Repair instructions and/or specific
problems relative to the product.
FOR NON-WARRANTY REPAIRS, consult
OMEGA for current repair charges. Have the
following information available BEFORE
contacting OMEGA:
1. Purchase Order number to cover the
COST of the repair,
2. Model and serial number of the
product, and
3. Repair instructions and/or specific problems
relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible.
This affords our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2005 OMEGA ENGINEERING, INC. All rights reserved. This document may not be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without
the prior written consent of OMEGA ENGINEERING, INC.
Where Do I Find Everything I Need for
Process Measurement and Control?
OMEGA…Of Course!
Shop online at omega.com
TEMPERATURE
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies
Wire: Thermocouple, RTD & Thermistor
Calibrators & Ice Point References
Recorders, Controllers & Process Monitors
Infrared Pyrometers
PRESSURE, STRAIN AND FORCE
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Transducers & Strain Gages
Load Cells & Pressure Gages
Displacement Transducers
Instrumentation & Accessories
FLOW/LEVEL
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Rotameters, Gas Mass Flowmeters & Flow Computers
Air Velocity Indicators
Turbine/Paddlewheel Systems
Totalizers & Batch Controllers
pH/CONDUCTIVITY
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ pH Electrodes, Testers & Accessories
Benchtop/Laboratory Meters
Controllers, Calibrators, Simulators & Pumps
Industrial pH & Conductivity Equipment
DATA ACQUISITION
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Data Acquisition & Engineering Software
Communications-Based Acquisition Systems
Plug-in Cards for Apple, IBM & Compatibles
Datalogging Systems
Recorders, Printers & Plotters
HEATERS
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Heating Cable
Cartridge & Strip Heaters
Immersion & Band Heaters
Flexible Heaters
Laboratory Heaters
ENVIRONMENTAL
MONITORING AND CONTROL
Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Ⅺ
ߜ Metering & Control Instrumentation
Refractometers
Pumps & Tubing
Air, Soil & Water Monitors
Industrial Water & Wastewater Treatment
pH, Conductivity & Dissolved Oxygen Instruments
M4167/1005
|