Palsonic CRT Television 8040PFST User Manual

OWNER'S MANUAL  
PURE FLAT HI-VISION STEREO TELEVISION  
80CM CORDLESS REMOTE COLOUR TELEVISION  
MODEL: 8040PFST  
Type Tested  
Electrical  
Safety  
AS/NZS 3250 Lic 4166  
Standards Australia  
APP No: N15900  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111  
FAX: (02) 9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
 
Congratulations on your purchase of this colour PURE FLAT Hi-Vision  
Palsonic television receiver.  
We recommend that you thoroughly read this manual before use to fully enjoy the  
many functions and excellent effects of this receiver.  
Retain is manual in an easily accessible location for future reference.  
Contents  
Main features ................................................................................................  
Notes for operation ......................................................................................  
Installation and appearance ........................................................................  
Antenna connection .....................................................................................................................  
Battery installation ........................................................................................................................  
1
2
3
3
3
Appearance ....................................................................................................................................4  
The remote controller ................................................................................................................... 5  
Operation ......................................................................................................  
6
6
7
10  
11  
12  
15  
Switching on/off ...........................................................................................................................  
Presetting channels ......................................................................................................................  
Channel selection ........................................................................................................................  
Sound mode selection .................................................................................................................  
Picture and sound adjustment .....................................................................................................  
Other functions ............................................................................................................................  
External equipment connections ................................................................ 17  
Trouble shooting .......................................................................................... 19  
Specifications ...............................................................................................  
20  
1
 
NOTES FOR OPERATION  
* Do not let the TV set be in standby condition for a long period of time. When it is not in use,  
please turn off the power supply and remove the power plug. When it is to be left for a  
prolonged period of time, it is recommended to disconnect the connection to the outdoor  
aerial, to avoid thunder strike.  
* Please follow cautions for safety in the TV set instructions, and all warnings and descriptions  
denoted on the TV set.  
Cautions For Safety  
Note: This TV set can be operated on an AC power of 240V, 50Hz. You should not use power  
supply of the other type.  
When an unusual situation  
occurs, turn off the power  
switch at once and remove the  
plug from the wall outlet.  
Contact a qualified service  
department in your local area.  
In order to wipe dust off the  
picture tube or off the cabinet,  
you should remove the power  
plug from the wall outlet first.  
You can wipe lightly with a  
piece of dry, clean, soft cloth.  
The TV set should be placed  
on an adequate place without  
exposing it to direct sunlight  
and other sources of heat to  
prevent the deformation of the  
cabinet or damage to  
Do not expose the TV set to  
rain or excessive moisture, to  
prevent tire disaster or  
electric shock. Avoid using  
the set in very warm or damp  
places. Never use it in a  
bathroom.  
components.  
Do not cover the Ventilating  
holes in the cabinet. Keep a  
space of more than 5cm from  
the walls to the TV set, to  
There exists High Voltage in  
this TV set. Do not remove  
the cover to avoid danger.  
guarantee the good ventilation.  
When the power cord or the  
plug is damaged, please  
contact a qualified service  
department to get service.  
When the TV set is to be left  
unattended, please turn off the  
power switch and remove the  
plug from the wall outlet.  
2
 
Installation and appearance  
Antenna connection  
To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV  
cable. If the signals are strong enough, you may use an indoor aerial.  
Note: In case of using the  
Twin-lead aerial feeder (300 )  
for UHF/VHF aerial, use a 300-  
75 ohm adaptor (not supplied)  
When using the coaxial cable (not  
supplied) (75 ) for UHF/VHF  
aerial, connect the plug into the  
75 ohm aerial socket directly.  
Note:  
When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off  
the power switch on the TV while connecting the antenna lead.  
In thunder and lightning, weather, please disconnect the connection to the outdoor aerial to avoid  
thunder/lightning strike.  
Effective range of the remote control  
operation  
Battery Installation:  
1) Remove the back battery cover.  
2) Insert two size AAA batteries according to  
the polarity indication inside the remote  
controller.  
1. When the remote controller is not used for  
an extended period of time or the batteries  
are worn out, please remove the batteries in  
time to avoid battery leakage.  
2. Avoid moisture and mechanical shock to the  
remote controller.  
3
 
Appearance  
Front view  
POWER SWITCH  
VOLUME DOWN  
VOLUME UP  
CHANNEL DOWN  
CHANNEL UP  
MENU  
(3) Video 3 input terminals  
{S-VIDEO, VIDEO,  
AUDIO L/MONO, R}  
TV/AV  
SYSTEM SELECT  
Note: Functions of MENU, TV/AV, SYSTEM, VOL  
, CH  
are also provided  
to the remote controller.  
Back view  
MONITOR output terminals  
{VIDEO, AUDIO L/MONO, R}  
Antenna input  
(2) Video 2 input terminals  
{S-VIDEO, VIDEO, AUDIO L/MONO, R}  
(1) Video 1 input terminals  
{S-VIDEO, VIDEO, AUDIO L/MONO, R}  
4
 
The Remote Controller  
5
 
Operation  
Switching on/off  
Push the main power switch on, if the set is in Standby mode, the power indicator is red;  
If there are pictures appearing on the screen, the indicator is yellow.  
If no picture appears on the screen, push the power button on the remote controller to  
turn the set on, the indicator turns to yellow.  
1.  
2.  
Without using the remote controller, you can push any of the VOL  
or VIDEO button to turn on the TV.  
, CH  
Note: If there are no input signals to the TV when the TV is on, a blue background will  
appear on the screen. After 15 minutes if there are still no signals to the TV, it will  
enter into standby mode automatically.  
Push the main power switch to turn off the set.  
If you want to turn off the TV temporarily, push the  
3.  
4.  
button on the remote controller to  
switch the set to standby mode, the indicator turns to red.  
Special indication:  
Last-Mode-Memory: after turning off the power, the last TV mode picture and sound  
setting mode and preset channels all are memorised. Therefore, the next time you turn on  
the TV, the TV will work in the previous setting mode.  
.
If you directly pressed the main power switch on the TV to turn it off, you must press the  
main power switch to turn on the TV.  
.
If you pressed the main power switch to turn off the TV when in standby mode, press the  
main power switch and then operate from the remote controller to turn the TV on.  
Auto-Power-off function: there are two kinds of Auto-Power-Off function:  
1. If a vacant channel is tuned or TV broadcast for a day is finished, the TV will automatically  
turn off after about 15 minutes.  
2. OFF - timer function. However, if the OFF - timer is operating, it takes precedence, that  
is, the function of Auto-Power-Off, if no signals received will be ineffective.  
6
 
Presetting the channels  
Press the MENU button to  
display the main menu  
There are two ways to preset channels: to preset  
channels automatically and to preset channels manually.  
Below we will describe how to preset the channels  
by making use of the menu.  
MENU  
1. To enter into menu  
1.1 Press the MENU button to enter into the main  
Press the or button  
to select SEARCH  
menu.  
1.2 Press menu item select button or to select  
MENU  
SEARCH.  
1.3 Press the  
or  
button to enter into the sub-menu of  
SEARCH  
SEARCH.  
Press the  
to display the sub-menu  
of SEARCH  
or button  
Note:  
The MENU button refers to the MENU button on  
the remote controller or on the TV set, the or  
button refers to the or button on the  
SEARCH  
remote controller or CH  
on the TV  
MANUAL SEARCH  
AUTO SEARCH  
set, the or button refers to the  
button on the remote controller or the VOL  
button on the TV set.  
or  
Press the button to  
select AUTO SEARCH  
2. AUTO SEARCH  
2.1  
Press the menu item select button or to select  
AUTO SEARCH (the caption on the screen  
is red).  
AUTO SEARCH  
Press the or button  
it begins searching  
automatically  
2.2Press  
or  
button, the TV begins to search TV  
channels automatically. All active channels will be  
preset and stored into the memoriser automatically.  
After presetting, the TV will return to the first  
channel program.  
12 VHFH  
lllllllllllll  
Before auto - search begins, you had better press  
"SYS" button to set the current sound system to  
B/G and the colour system to "AUTO".  
Note:  
After presetting is finished  
it returns to the first  
channel  
1
7
 
Press the or button  
to select MANUAL  
SEARCH  
3. MANUAL SEARCH  
If AUTO-SEARCH cannot preset the desired channels,  
or you want to preset the desired channels one by  
one with the preferred channel numbers - please make  
use of MANUAL SEARCH.  
SEARCH  
MANUAL SEARCH  
AUTO SEARCH  
Press the menu item select button or to select  
MANUAL SEARCH (the caption on the screen are  
red).  
3.1  
Press the or button  
to display the menu of  
MANUAL SEARCH  
3.2  
Press the  
or  
button to enter into the sub-menu  
of MANUAL SEARCH.  
MANUAL SEARCH  
3.3 Press the or button to choose POSITION.  
(the caption on the screen are red), press the  
or  
button to select the needed program number (from  
00 ~ 99.  
Press the or button  
to select SEARCH  
Note:  
Push the  
or  
button to select a channel number  
or  
within 0.7 of a second. Push and hold the  
MANUAL SEARCH  
button for more than 0.7 of a second to select a  
decimal number.  
POSITION  
10  
Press the or  
button to select SEARCH, push  
3.4  
the  
button to search channels from current channel  
Press the  
select the wanted channel  
number  
button to  
to higher channel. Push the  
button to search  
channels from current channel to lower channel.  
When a channel is located, the searching stops, this  
channel is then memorised with a present channel  
number.  
POSITION  
22  
Note: You can also make use of band selection to quicken  
the searching process in your desired band. Pressing  
Press the button  
select SEARCH  
the  
or  
button moves the band to the next step  
in the sequence below.  
SEARCH  
UHF  
VHFH  
VHFL  
Press the button  
it begins searching  
When a station is searched  
the searching stops  
POSITION 22  
SEARCH  
SEARCH  
8
 
3.5 When you want to store and memorise another channel  
with another position, repeat steps 3.3, 3,4.  
MANUAL SEARCH  
POSITION 14  
4. Skip unwanted program numbers  
After presetting the channels, you can skip unwanted  
program numbers to select your desired channels.  
Press the button to  
select SKIP  
4.1  
4.2  
Repeat steps 3.1 to 3.3 to select the unwanted  
program position of the unwanted channels .  
SKIP OFF  
Press the or  
or button to select SKIP ON.  
After completion of the channel presetting, when you  
press the CH button to select channel, the  
button to select SKIP. Press the  
Press the  
or  
button  
to select SKIP ON  
unwanted channels will be skipped.  
If you want to skip other unwanted channels, repeat  
step 4.1 above to change the channel numbers.  
SKIP ON  
If you want to restore the skipped program numbers,  
do step 4.1 to select these program numbers, then  
MANUAL SEARCH  
POSITION 10  
press the  
or  
button to select SKIP OFF.  
5. Manual Fine Tuning  
Press the button to  
select MFT  
When sound and picture's effect of a channel is poor  
(for example: one or two CATV channel's sound and  
picture are not standard), you can correct by the use of  
Manual Fine Tuning.  
MFT  
5.1  
5.2  
Repeat steps 3. 1 to 3.3 to select the channels you  
want to manually fine tune.  
Press the  
begins fine tuning in  
direction.  
button it  
Push the or button to select MFT, then press  
or  
button, the channel begins to search until  
the optimum picture and sound is achieved.  
Note:  
If some channel's colour or sound is abnormal, it  
may be that the setting of the colour or the sound  
system is wrong, please do the following step 6 to  
set the colour and sound system.  
MFT  
- - - - -  
llllllllllllll  
After finishing the preset operation, press the  
MENU button repeatedly until the "on - screen"  
display disappears and exits from the main menu.  
Press the MENU button  
repeatedly until on-screen  
display menu disappears  
9
 
Press the SYS button  
6. The setting of colour and sound system  
6.1 Press the SYS button, the screen will display colour and  
SYSTEM  
sound system.  
COLOR AUTO  
6.2  
If the displaying colour is abnormal, press the or button  
to select COLOR, then press the or button to select  
the right colour system. Every time you press or button,  
the colour system will change in the sequence on the right.  
AUTO  
PAL  
SECAM  
NTSC 4.43  
NTSC 3.58  
6.3  
If the sound is abnormal, press the or button to select  
SOUND, then press the or button to select the right  
sound system. The sound system will change in the sequence  
on the right:  
D/K  
I
M
B/G  
Now you can watch the broadcasting TV program at the  
preset channel.  
Channel selection  
Press the - / - - button  
- -  
You can select your desired TV program by one of the following  
methods.  
1. Making use of the direct select buttons 0 ~ 9 and - /- -  
To select a one - digit channel, press - /- - button to display  
" - " on the upper right corner of the screen, then directly  
press a number button of 0 ~ 9. To select a two-digit channel,  
press the - / - - button to display "- - " on the upper right  
corner of the screen, then press the number buttons. The  
channel range is 0 ~ 99.  
Press the 0 ~ 9 button  
10  
2. Making use of the CH  
button  
Press the CH button, the channel number will increase  
progressively. Press the CH button, the channel number  
will decrease progressively.  
2
3. Making use of the  
Press the button, it can switch back quickly to the previous  
channel. For example, the channel you previously watched is  
2, the present channel is 8, press the button, it will return  
to channel 2, press the button it will return to channel 8.  
button  
Press the  
button  
8
10  
 
Sound mode selection  
If the broadcasting TV station is transmitting high quality two-channel digital sound  
(NICAM) to be added to the already existing FM sound, or transmitting a second FM sound  
with an identification signal to be added to the already existing first FM sound (IGR), in the  
upper right corner of the screen will display an indication for several seconds which is listed  
in the following table. You can press the " " button repeatedly to select sound source.  
On - screen display and sound source  
Sound transmitting mode  
"FM MONO"  
FM mono sound  
"FORCE FM"  
FM MONO  
1
2
FM mono sound  
Only one FM channel transmitting mono sound  
"STEREO"  
FM stereo sound  
"FORCE FM"  
first FM sound  
FM STEREO  
two FM channels transmitting stereo sound  
FM DUAL  
"DUAL 1"  
"DUAL 2"  
3
4
two FM channels transmitting dual language  
language 1  
language 2  
NICAM MONO  
FM MONO  
"NICAM MONO"  
digital mono sound  
"FORCE FM"  
FM mono sound  
one digital sound channel  
transmitting mono sound  
one FM sound channel  
(The sound signal in FM  
channel is same as the  
one in NICAM channel. So  
when the NICAM is trans-  
mitting, on the TV set auto-  
matically switches to high  
quality digital sound chan-  
nel).  
NICAM STEREO  
two digital sound channels  
transmitting stereo sound  
"STEREO"  
digital stereo sound  
"FORCE FM"  
FM mixed sound  
5
6
NICAM DUAL  
two digital sound channels  
transmitting dual sound  
"DUAL 1"  
language 1 digital  
"DUAL 2"  
language 2 digital  
"FORCE FM"  
language 1 FM  
"NICAM MONO"  
"FM MONO"  
"NICAM MONO"  
NICAM MONO  
one digital sound channel  
transmitting mono sound  
FM MONO  
(In yellow. Only for indication)  
7
8
9
digital mono sound FM mono sound  
one FM sound channel  
(The sound signal in FM  
channel is different from the  
one in NICAM channel. So  
when the NICAM is trans-  
mitting on the TV screen  
only displays an indicator  
in yellow, while the active  
sound channel is FM).  
FM mono sound  
"STEREO"  
"FM MONO"  
"STEREO"  
(In yellow. Only for indication)  
NICAM STEREO  
two digital sound channels  
transmitting stereo sound  
digital stereo sound FM mono sound  
FM mono sound  
NICAM DUAL  
"DUAL"  
(In yellow.  
Only for indication)  
"DUAL 1"  
"DUAL 2"  
"FM MONO"  
language 3  
two digital sound channels  
transmitting dual sound  
language 1  
language 2  
language 3  
If you experience loud noise in digital sound channel because of the weak signal,  
please press the " " button to set the sound mode to "FM MONO" or "FORCE FM", thus to  
select FM sound channel. In "FORCE FM" mode, the TV set no longer automatically searches  
"NICAM" or "IGR" signals.  
11  
 
Picture and sound adjustment  
Press the  
|
button, you can quickly select two  
modes of picture and sound quality standard:  
One is standard mode ( on the screen displays  
("STANDARD");  
STANDARD  
The other is personal select mode (on the screen  
displays "MEMORY").  
Press the  
|
button  
1. Picture adjustment  
MEMORY  
Complete the following steps and you will adjust the  
picture quality.  
1.1 Press the MENU button, on the screen will dis-  
play the main menu, press the or button to  
Press the MENU button  
to display the main menu  
select PICTURE, then press  
or  
button to  
enter into the sub-menu of PICTURE.  
1.2 Press or the button to select the items you  
want to adjust (the caption on the screen is red),  
MENU  
PICTURE  
then press the  
or  
button to adjust the level of  
picture control amount.  
Press the  
or button  
to display the menu of  
PICTURE  
Standard  
Mode  
Adjustment  
item  
Pressing (Memory mode)  
PICTURE MEMORY  
deeper  
lighter  
COLOUR  
BRIGHT  
paler  
50  
70  
COLOR 70  
BRIGHT50  
lllllllll  
darker  
weaker  
stronger  
stronger  
bluish  
CONT (Contrast)  
SHARP  
70  
20  
0
weaker  
purplish  
Press the or button to  
select adjustment item  
TINT  
BBK  
ON  
ON (OFF)  
(Blue background)  
PICTURE MEMORY  
COLOR 70  
BRIGHT 50  
lllllllll  
llllll  
Note:  
* Only when the colour system is NTSC, there is  
TINT item.  
Press the or button to  
adjust the level  
* If the signal being received is weaker, adjust  
SHARP to lower level to reduce the noise. If the  
signal being is stronger, adjust SHARP to  
higher level to improve the picture quality.  
PICTURE MEMORY  
lllllllll  
COLOR 70  
BRIGHT 60llllllll  
* If the TV signals are too weak and you can not watch the program normally, blue background  
will appear automatically to overcome the picture. If you insist on watching the program, you  
can select "BBK" item to shut off the blue background. We suggest you turn "BKK" on in  
ordinary circumstances.  
12  
 
Press the MENU button  
and button  
2. Sound adjustment  
Complete the following steps and you will adjust the  
sound quality.  
MENU  
PICTURE  
SOUND  
Press the MENU button to display the main  
menu. Press the or button to select  
SOUND , then press the  
into the sub-menu of SOUND.  
Press the or button to select your required  
sound adjustment item (the caption on the screen  
2.1  
2.2  
or  
button to enter  
Press the or button  
to display the menu of  
sound  
is red), then press the  
the sound quality.  
or  
button to adjust  
SOUND MEMORY  
llllll  
llllll  
BASS 50  
TREBLE 50  
Pressing (Memory mode)  
Adjustment  
Standard  
mode  
item  
Press the or button  
to select adjustment mode  
BASS  
weaker  
weaker  
stronger  
stronger  
50  
50  
TREBLE  
SOUND MEMORY  
decrease right decrease left  
llllll  
BASS 50  
0
BALANCE  
side sound  
on/off  
side sound  
on/off  
llllll  
TREBLE 50  
Off  
50  
SURROUND  
SURROUND  
weaker  
stronger  
Press the  
or  
button  
to adjust the level  
You can select the sound quality according to the  
programme content and personal preference.  
SOUND MEMORY  
llllll  
BASS 50  
llllllll  
TREBLE 70  
TREBLE  
Strong  
Tone quality  
suitable for listening  
to music  
SURROUND  
BASS  
Press the  
mode changes between  
STANDARD and MEMORY  
|
button  
on  
Strong  
suitable for listening  
to news, language  
standard  
weak  
off  
off  
weak  
SOUND STANDARD  
llllll  
llllll  
BASS 50  
TREBLE 50  
middle middle  
Note: During the process of picture and sound ad-  
justment, every time you press the button,  
STANDARD/MEMORY is displayed on the  
|
screen alternatively. When picture and tone  
quality are adjusted to your desired level,  
the mode is memory mode.  
13  
 
3. SURROUND SOUND  
SURROUND OFF  
Making use of surround sound, you can enjoy  
the dynamic sound effect that is like being  
in a music hall. To make use of surround  
sound, complete steps 2.1, 2.2 to  
select SURROUND ON, and press the  
button to select SURROUND then press  
Press the  
or  
button to  
to select SURROUND ON  
the  
or  
button to adjust its effect. To  
turn off surround sound, select  
SURROUND OFF.  
SURROUND ON  
Press button to  
select SURROUND  
4. Adjusting the volume and muting the  
sound.  
You can press the VOL  
button to  
llllll  
SURROUND 50  
adjust the volume, and you can press the  
button to mute the sound. Press the button  
again or VOL button or operate any  
item of SOUND menu, the sound is restored  
to normal.  
Press the  
button to  
increase SURROUND  
SURROUND 70 llllll  
VOLUME  
50  
MUTE  
50  
14  
 
Other functions  
1. ON Timer/OFF Timer  
With the timer, you can set the TV to turn on/off automatically  
at a preset time. In the menu of TIMER you can set: CLOCK,  
ON TIME, OFF TIME.  
menu of TIMER  
TIMER  
OFF TIME OFF  
0:00  
1.1 OFF TIME  
With the OFF timer, the TV will automatically switch to  
standby mode at a preset time.  
1.1.1  
Press the MENU button to enter into the main menu, press  
the or button to select TIMER, and press the  
or  
button to enter into the sub - menu of TIMER.  
1.1.2  
Press the or button to select OFF TIME. Pressing  
the or button set ONCE/EVERY OFF TIME. Every  
time you press the or button, it will change in the  
TIMER  
OFF TIME EVERY  
10:00  
sequence of OFF EVERY ONCE OFF EVERY  
------. When the setting is ONCE or EVERY OFF  
TIME, press the or button to select time to turn off  
the set, then press the  
or  
button to set the time to  
turn off the TV, at the preset time the TV will automatically  
switch to standby mode. To cancel OFF TIME, set  
OFF TIME OFF.  
1.2 ON TIME  
With the ON timer, the TV will automatically turn on to preset  
menu of TIMER  
channel at a preset time.  
TIMER  
ON TIME OFF  
0:00  
1.2.1 Do Step 1.1.1 to enter into the sub-menu of TIMER  
1.2.2  
Press the or button to select ON TIME. Pressing  
the or button set ONCE/EVERY ON TIME. Every  
time you press the  
sequence of OFF  
or  
EVERY  
button, it will change in the  
ONCE OFF EVERY  
......... When the setting is ONCE or EVERY ON TIME,  
press the or button to select time to turn on the set,  
TIMER  
ON TIME EVERY  
then press the  
the TV. After the setting, press the or  
POS., then press the or button to select your  
desired program number.  
or  
button to set the time to turn on  
6:00  
button to select  
15  
 
1.2.3.  
Pressing the  
button set the TV into standby  
mode. At the preset time the TV will automatically  
turn on to preset channel. To cancel ON  
TIME, set ON TIME OFF.  
1.3 CLOCK  
The built-in clock employs the 24-hour system.  
Do step 1.1.1 to enter into the sub-menu of  
TIMER.  
Press the or button to select CLOCK.  
1.3.1  
TIMER  
10:30  
CLOCK  
1.3.2  
Pressing the  
or  
button set the present  
hour and minute.  
Note:  
To make use of ON TIME and OFF TIME,  
set the clock firstly and check the correct  
time.  
1.4 SLEEP  
To make use of SLEEP function, press the SLP  
button every time, the letters displaying on the  
screen will change in the sequence of OFF  
120 min 110min ......10min OFF..... At the  
preset time, the TV will automatically switch to  
standby mode.  
SLEEP 30min  
2. Selecting the menu language  
You can select the menu language: ENGLISH or  
CHINESE(  
).  
2.1  
Press the MENU button to enter into the main  
menu, press the or button to select  
LANGUAGE.  
ENGLISH  
2.2  
2.3  
Press the  
or  
button to enter into the sub -  
menu. Press the or button to select  
ENGLISH or  
Press the MENU button repeatedly until the set  
exits from menu - display mode.  
16  
 
External Equipment Connections  
The following describes how to use and connect the TV with other equipment. Refer to the  
owner's manual of the other equipment to be connected as well.  
1. To Connect to AV input  
You can video equipments such as a VTR and video camera to this TV and enjoy the  
high quality picture and sound.  
If your video equipment has an S-VIDEO output terminal, connect it to the S-VIDEO input  
terminal (special S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (phono type).  
17  
 
To select the input press the AV button on the remote controller repeatedly until you see the  
corresponding input indication on the screen. To return to aerial input, press the AV button until  
it displays programme number, or press direct channel select button or the CH  
button.  
VIDEO 3  
VIDEO 1  
VIDEO 2  
TV  
If the colour of video input is abnormal, the colour system setting may be incorrect. Press the SYS  
button to display COLOR AUTO If not, press the  
or  
button until normal colour appears  
Note on the S-VIDEO terminal  
The S-VIDEO input terminal has priority over the AV1, AV2 VIDEO terminals on the rear and  
the AV3 VIDEO terminals on the left side. To use equipment connected to the video terminals,  
disconnect any plug from the S-VIDEO terminal  
2. To connect MONITOR output terminals  
You can connect a stereo system to the MONITOR output terminals (photo type) on the set  
to enjoy a high - quality sound from the stereo system. The MONITOR output terminals output  
the video and audio signals being displayed on the screen.  
18  
 
Troubleshooting  
Symptoms  
Check the following items  
No power, red indicator  
is not lit up  
.
Be sure the power cord is plugged in  
Contrast, colour, tint are not correctly adjusted  
.
.
Poor colour, poor tint  
Possible interferences of automobiles, motorcycle,  
trolley bus, neon lamps, etc.  
Spots appear on the  
screen  
.
Possible interferences of electronic interference from  
another TV set, a computer, electronics game machine,  
a broadcast station, etc.  
Stripes appear on the  
screen  
.
.
.
This may be caused by reflections from nearby  
mountains or buildings.  
Double images or  
"ghosts"  
Check the antenna direction.  
It is possible that the aerial "lead - in" is damaged  
or comes off.  
Snowy picture  
.
Check the antenna direction.  
.
The batteries may be worn out  
The remote controller  
does not work  
.
The batteries may be installed with their polarity  
reversed.  
.
Even if the picture or the sound is normal, changes  
in the room temperature sometimes make the TV  
cabinet expand or contract, making a noise. This  
does not indicate a malfunction.  
TV cabinet creaks  
19  
 
Specifications  
AC 240V, 50Hz  
200W  
926 (W) x 678.5 (H) x 582 (D)  
73 kg  
Power supply:  
Power consumption:  
Dimension (mm):  
Weight:  
80 cm  
CRT:  
TV system & channel range  
System  
PAL-D/K  
PAL-B/G  
PAL-I  
NTSC-M US  
SECAM-B/G  
SECAM-D/K  
VHF  
1-12  
2-12  
2-12  
2-13  
2-12  
1-12  
CATV  
Z1 ~ Z37  
X ~ Z + 2, S1 ~ S41  
UHF  
13-57  
21-69  
21-69  
14-79  
21-69  
21-69  
A-6~A-l,A~W,AA~FFF  
X ~ Z + 2, S1~S4  
Colour system:  
Sound system :  
PAL/SECAM/4.43NTSC/3.58NTSC  
NICAM728: B/G 5.5/5.85  
I 6.0/6.552  
D/K 6.5/5.85  
IGR(2 - Carrier) : B/G 5.5/5.74  
Sound output:  
Accessories:  
13W + 13W  
one remote controller  
Note : Design and specifications are subject to change without notice.  
20  
 
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111  
FAX: (02) 9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
604-Z34183-00  
 

Miele Washer W 1512 User Manual
Milnor Refrigerator KQEXTT1301 User Manual
NETGEAR Network Router DGND4000 User Manual
Nikon Digital Camera 25498B User Manual
NuTone Water System CV350 User Manual
Olympus Camcorder FE 290 User Manual
Omnimount TV Mount 10041 User Manual
Oregon Scientific Laptop LC68 12 User Manual
Palm Cell Phone Treo 800W User Manual
Panasonic Music Mixer AG HMX100E User Manual