Panasonic Cell Phone KX TGA939BX User Manual

TGA939BX(e).fm Page 1 Thursday, October 29, 2009 11:23 AM  
Installation Manual  
Additional Digital Cordless Handset  
Model No. KX-TGA939BX  
Thank you for purchasing a Panasonic product.  
This unit is an additional handset compatible with the following  
Panasonic Digital Cordless Phone: KX-TG9385  
You must register this handset with your base unit before it can  
be used. This installation manual describes only the steps  
needed to register and begin using the handset. Please read  
the base unit’s operating instructions for further details.  
Charge the batteries for about 7 hours before initial use.  
Please read this installation manual before using the unit and  
save it for future reference.  
 
TGA939BX(e).fm Page 3 Thursday, October 29, 2009 11:23 AM  
Battery installation and battery charge  
Important:  
LUse the supplied rechargeable batteries (Part No. HHR-55AAAB).  
LWhen installing the batteries:  
– Wipe the battery ends (S, T) with a dry cloth.  
– Avoid touching the battery ends (S, T) or the unit contacts.  
– Confirm correct polarities (S, T).  
LWhen replacing the batteries:  
– USE ONLY rechargeable Ni-MH batteries AAA (R03) size.  
– Do NOT use Alkaline/Manganese/Ni-Cd batteries.  
– We recommend using the Panasonic rechargeable batteries noted  
in the base unit’s operating instructions for replacement battery  
information.  
1 Press the notch on the handset cover firmly, and slide it in the  
direction of the arrow.  
2 Insert the batteries negative (T) end first. Close the handset cover.  
3 Place the handset on the charger for about 7 hours before initial  
use.  
Note:  
LIf the batteries are fully charged, but the operating time seems to be  
shorter, clean the battery ends (S, T) and the charge contacts with a  
dry cloth.  
– 3 –  
 
TGA939BX(e).fm Page 4 Thursday, October 29, 2009 11:23 AM  
Registering a handset to the base unit  
1 Handset:  
Lift the handset and press {OFF}.  
2 Base unit:  
Press and hold {LOCATOR} for about 5 seconds until the registration  
tone sounds.  
LIf all registered handsets start ringing, press the same button to  
stop. Then repeat this step.  
3 Handset:  
Place the handset on the charger.  
LContinue the operation even when the handset display shows  
Registering”.  
4 With the handset still on the charger, wait until a long beep sounds  
and w stops flashing.  
Note:  
LIf an error tone sounds, or if w is still flashing, register the handset  
according to the base unit’s operating instructions.  
Display language  
1 {MENU} i {#}{1}{1}{0}  
2 {V}/{^}: Select the desired setting. i {SAVE} i {OFF}  
– 4 –  
 
TGA939BX(e).fm Page 5 Thursday, October 29, 2009 11:23 AM  
Wall mounting  
1 Drive the screws (not supplied) into the wall.  
2 Mount the charger (A), then slide it down (B) and to the right (C)  
until it is secure.  
25 mm  
A
B
C
Screws  
(100-240 V AC, 50/60 Hz)  
Belt clip  
NTo attach  
NTo remove  
– 5 –  
 
TGA939BX(e).fm Page 6 Thursday, October 29, 2009 11:23 AM  
For your safety  
To prevent severe injury and loss of life/property, read this section  
carefully before using the product to ensure proper and safe operation of  
your product.  
WARNING  
Power connection  
LCompletely insert the AC adaptor/power plug into the power outlet.  
Failure to do so may cause electric shock and/or excessive heat  
resulting in a fire.  
LRegularly remove any dust, etc. from the AC adaptor/power plug by  
pulling it from the power outlet, then wiping with a dry cloth.  
Accumulated dust may cause an insulation defect from moisture, etc.  
resulting in a fire.  
LUnplug the product from power outlets if it emits smoke, an abnormal  
smell, or makes an unusual noise. These conditions can cause fire or  
electric shock. Confirm that smoke has stopped emitting and contact  
an authorized service center.  
Installation  
LTo prevent the risk of fire or electrical shock, do not expose the product  
to rain or any type of moisture.  
LDo not place or use this product near automatically controlled devices  
such as automatic doors and fire alarms. Radio waves emitted from  
this product may cause such devices to malfunction resulting in an  
accident.  
CAUTION  
Installation and relocation  
LThe AC adaptor is used as the main disconnect device. Ensure that  
the AC outlet is installed near the product and is easily accessible.  
– 6 –  
 
TGA939BX(e).fm Page 7 Thursday, October 29, 2009 11:23 AM  
Battery  
LWe recommend using the supplied batteries or additional/replacement  
batteries noted in the base unit’s operating instructions for  
replacement battery information. USE ONLY rechargeable Ni-MH  
batteries AAA (R03) size.  
LDo not mix old and new batteries.  
LDo not open or mutilate the batteries. Released electrolyte from the  
batteries is corrosive and may cause burns or injury to the eyes or skin.  
The electrolyte may be toxic if swallowed.  
LExercise care when handling the batteries. Do not allow conductive  
materials such as rings, bracelets or keys to touch the batteries,  
otherwise a short circuit may cause the batteries and/or the conductive  
material to overheat and cause burns.  
LCharge the batteries provided with or identified for use with this  
product only, in accordance with the instructions and limitations  
specified in this manual.  
LOnly use a compatible base unit (or charger) to charge the batteries.  
Do not tamper with the base unit (or charger). Failure to follow these  
instructions may cause the batteries to swell or explode.  
Other information  
LOperating the product near electrical appliances may cause  
interference. Move away from the electrical appliances.  
LUse only the power cord and batteries indicated in this manual. Do not  
dispose of batteries in a fire. They may explode. Check with local  
codes for possible special disposal instructions.  
Routine care  
LWipe the outer surface of the product with a soft moist cloth.  
LDo not use benzine, thinner, or any abrasive powder.  
– 7 –  
 
TGA939BX(e).fm Page 8 Thursday, October 29, 2009 11:23 AM  
Notice for product disposal, transfer, or return  
LThis product can store your private/confidential information. To protect  
your privacy/confidentiality, we recommend that you erase the  
information such as phonebook or caller list entries from the memory  
before you dispose of, transfer, or return the product.  
Information on Disposal in other Countries outside the European  
Union  
These symbols are only valid in the European Union.  
If you wish to discard these items, please contact your local authorities or  
dealer and ask for the correct method of disposal.  
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan  
Copyright:  
This material is copyrighted by Panasonic Communications Co., Ltd.,  
and may be reproduced for internal use only. All other reproduction, in  
whole or in part, is prohibited without the written consent of Panasonic  
Communications Co., Ltd.  
© Panasonic Communications Co., Ltd. 2009  
PNQX2286ZA DM1109SY0  
BX-2/3  
 

Milwaukee Cordless Drill 6562 User Manual
Milwaukee Saw HEAVY DUTY CIRCULAR SAW User Manual
Napoleon Grills Gas Grill PT450RB User Manual
National Instruments Network Card NI 9871 User Manual
NordicTrack Home Gym NTEL12910 User Manual
Onkyo Headphones HTP 938 User Manual
Onkyo Stereo Receiver HT R510 User Manual
Oster Cooktop CKSTBUDS00 User Manual
ParaBody Home Gym 911101 User Manual
Patriot Products Chipper Pro Series User Manual