Panasonic Power Supply M9RZ90GB4LG User Manual

Please observe safety precautions fully.  
Safety Precautions  
1. Introduction  
General  
Caution  
Thisis a compact AC geared-motor having multiple international standard certifications.To use this  
product for a prolonged period, read this manual thoroughly.  
Failure to heed this instruction will result in  
electric shock or fire.  
Don't put an object or finger into the motor  
opening.  
This is designed for use in corporation with general purpose industrial devices. The product must  
be handled by experienced personnel familiar with the product.  
Failure to heed this instruction will result in  
fire, personal injury, malfunction or damage.  
Don't turn off and on power so frequently.  
Don't pull leadwires with an excessive force.  
<note>  
Failure to heed this instruction will cause  
fire, electric shock or personal injury.  
When export this product, follow statutory provisions of the destination country.  
Don't use the equipment in highly intensive  
electric field.  
Failure to heed these instructions will  
cause personal injury or fire.  
Unpacking  
Don't use the equipment under direct sunshine.  
• Proceed as follows:  
Induced malfunction will cause  
malfunction or personal injury.  
Don't use the equipment in an environment where  
electro-static voltage potentials may be produced.  
• First open the top of the packing and check the units for damage in transit.  
• Check the motor nameplate for the model number, output, No. of poles, voltage, frequency,  
etc.  
Failure to heed this instruction will result in  
personal injury or malfunction.  
Don't drop or cause topple over of something  
during transportation or installation.  
Failure to heed this instruction will result in  
fire, electric shock, personal injury or  
malfunction.  
Never attempt to perform modification,  
dismantle or repair.  
Do not use the product if it does not meet your specification (if you dare to use it, burn  
injury or fire may result).  
Perform installation by taking into  
consideration the mass of the body and rated  
output of the product.  
• A single-phase motor comes with capacitor and capacitor cap. Check the rated capacitance  
and voltage on the nameplate. Do not use the accessory capacitor if it does not meet your  
specification (if you dare to use it, you may be injuried or may have fire).  
• Gear head is optional.  
Adjust the motor ambient environmental  
condition to match the motor operating  
temperature and humidity.  
Failure to heed these requirements will  
result in personal injury or malfunction.  
• Check a gear ratio on the nameplate. Do not use it if it does not meet your specification (if you  
dare to use it, you may be injuried or may have fire).  
Exactly follow the installing method and  
direction specified.  
Connect a ground-fault interrupter, circuit breaker  
and replay to the brake control relay in series so  
that they are turned off upon emergency stop.  
Missing of one of these devices will cause  
malfunction.  
Should you find any discrepancy in the product, consult your local dealer.  
Test-run the securely fixed motor without  
loading to verify normal operation, and then  
connect it to the mechanical system.  
Operation using a wrong model or wrong  
wiring connection will result in personal injury.  
Level of input voltage to peripheral devices  
Operation from a voltage outside the rated voltage  
should correspond to the motor rated voltage. will cause electric shock, personal injury or fire.  
Provide protection device against idling of  
No protection will cause personal injury,  
damage, pollution or fire.  
electro-magnetic brake or gear head, or  
grease leakage from gear head.  
Don't place any obstacle object around the  
motor and peripheral, which blocks air passage.  
Temperature rise will cause burn injury or  
fire.  
Correctly run and arrange wiring.  
Wrong wiring will cause personal injury or  
electric shock.  
Maintenance must be performed by an  
experienced personnel.  
Always keep power disconnected when the  
power is not necessary for a long time.  
Improper operation will cause personal  
injury.  
Scraps must be treated as industrial waste.  
– 4 –  
– 5 –  
 
1. Introduction  
2. Installation  
Names and functions  
Motor  
Installation location  
Gear head nameplate  
Motor Nameplate  
Frame  
Install the motor as described to prolong the motor lifetime in a place where;  
(1) is free from rain and direct sunlight.  
(2) is free from vibration 4.9 m/s2 or more; shock, dust, iron powder or oil mist; splash of water. oil  
and grinding fluid; and away from flammable materials, corrosive gas (H2S, SO2, NO2, Cl2, etc.)  
or flammable gas.  
O ring  
Oil seal  
Key  
Bracket  
Oil seal  
(3) is enough ventilated dry and clean keeping oil, water, dust and heat away.  
(4) you can check and clean the motor easily.  
(5) is not in a closed environment where the motor temperature may increase. This may result in  
the motor life shortened.  
Wiring  
nameplate  
Output shaft  
Environmental condition  
Item  
Description  
Earth ground terminal  
–10°C to 40°C (no freezing) *1  
85% RH or below (no dewing)  
–10°C to 60°C (no freezing) *2  
4.9 m/s2 or below (10 to 60 Hz)  
Lower than 1000 m.  
Shaft  
Ambient temperature  
Ambient humidity  
Storage temperature  
Vibration  
M4 x 6 stainless steel  
with spring and flat washer  
Capacitor cap  
Altitude  
Flat washer  
Nut  
Screw  
1) Measurement taken at a point 5 cm from the motor.  
*
*
#187  
2) Allowable range for a relatively short period, for example, during transportation.  
Quick connect  
tab (Faston)  
Gear head accessories  
Installation  
Capacitor  
The motor can be installed vertically or horizontally but leadwires should be directed downward.  
Motor accessories  
(only for single phase version)  
Keep the motor away from oil, water and dust  
(1) Don't run the cable in water or oil.  
Motor  
(2) Don't expose the motor to splashing oil or  
water.  
Don't remove the nameplate.  
*
Cable  
Oil, water  
– 8 –  
– 9 –  
 

Miller Electric Welder XMT 456 CC User Manual
Milwaukee Saw 6520 21 User Manual
Multiquip Riding Toy HTX 44K4 User Manual
Napoleon Fireplaces Indoor Fireplace EPA 1450 User Manual
Niles Audio Speaker System NS IW560C User Manual
Omega Engineering Thermometer M1982 0902 User Manual
Onkyo Stereo System SR507 User Manual
Packard Bell Computer Drive DVX 460 User Manual
Panasonic Car Stereo System CQ 5250U User Manual
Panasonic Digital Camera AW E560 User Manual