Operating and installation instructions
Fridge-freezer combination
KF 7540 SN ed-3
G
To avoid the risk of accidents
or damage to this appliance
it is essential to read these instructions
before it is installed or used for the first time.
M.-Nr. 05 969 270
Contents
Adjusting the interior fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Adjusting the door shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Freezing and storing food. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Hints on home freezing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Packing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Before placing food in the freezer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Ice cubes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Freezer section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Problem solving guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Contents
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Climate range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Fitting the handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Aligning the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Changing the door hinging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Building in the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Description of the appliance
aSuper cool button and
fFreezer section temperature display
indicator light
gFreezer section
bRefrigerator section /
Stayfresh (0 °C) zone
On-Off button
temperature selector buttons
(upper button: warmer,
lower button: colder)
cRefrigerator section
temperature selector buttons
(upper button: warmer,
lower button: colder)
hFreezer section On-Off button
iSuper freeze button
and indicator light
jAlarm button
dRefrigerator section
temperature display
eSafety lock - indicator light
5
Description of the appliance
kButter and cheese compartment
lAdjustable shelves
mEgg trays
nInterior lighting
oFruit and vegetable containers
pDivider
qBottle shelf
rCondensate channel and
drain hole
sStayfresh (0 °C) zone dry
compartment
tControl for setting the
moisture level in the
humidity controlled compartment
uStayfresh (0 °C) zone
humidity controlled compartment
vFreezer drawers with
freezer calendar
wMarker system for frozen food
6
Caring for the environment
Disposal of the packing
material
Disposal of your old appliance
Old appliances contain materials which
can be reclaimed or recycled. Please
contact your dealer, your waste
collection centre or scrap merchant
about potential recycling schemes.
The transport and protective packing
has been selected from materials which
are environmentally friendly for disposal
and can normally be recycled.
Make sure that the pipework is not
damaged whilst moving an old
appliance. This is to ensure that the
refrigerant and oil in the compressor
cannot leak into the environment. It is
important that they are disposed of in a
safe manner by authorised persons
only.
Rather than just throwing these
materials away, please ensure they are
offered for recycling.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Ensure that the appliance presents no
danger to children while being stored
for disposal.
See the appropriate section in the
Warning and safety instructions.
7
Warning and Safety instructions
Technical safety
This appliance complies with all
relevant legal safety requirements.
Inappropriate use can however lead
to personal injury and damage to
property.
This appliance contains the coolant
Isobutane (R600a), a natural gas
which is very environment friendly.
Although it is flammable, it does not
damage the ozone layer and does not
increase the green house effect. The
use of this environment friendly coolant
has, however, led to a slight increase in
the noise level of the appliance. In
addition to the noise of the compressor,
you might be able to hear the coolant
flowing around the system. This is
unavoidable, but does not have any
adverse effect on the performance of
the appliance.
Read the operating instructions
carefully before starting to use this
appliance. They contain important
notes on installation, safety,
operation and care of the appliance.
This way you will avoid the risk of
accidents and damage to the
appliance.
Keep these operating instructions in
a safe place and pass them on to
any future user.
Care must be taken during
transportation and setting up of the
appliance that no parts of the coolant
system are damaged. Leaking coolant
can damage the eyes.
Correct use
In the event of any damage:
- avoid open fires
This appliance is intended for
domestic use only for the cool
storage of food and drink as well as for
storing deep frozen food, freezing fresh
food and for preparing ice. Any other
usage is not supported by the
manufacturer and could be dangerous.
The manufacturer cannot be held liable
for damage caused by improper use of
the appliance.
and anything which creates a spark,
- disconnect from the mains,
- air the room in which the appliance is
located for several minutes and
- contact the Service Department
for advice.
The more refrigerant there is in an
appliance, the larger the room it
should be installed in. In the event of a
leakage, if the appliance is in a small
room, there is the danger of
combustible gases building up.
For every 8 g of coolant at least 1 m3
room space is required. The amount of
coolant in the appliance is stated on the
data plate inside the appliance.
8
Warning and Safety instructions
Before connecting the appliance to
the mains supply make sure that
the rating on the data plate
Installation work, maintenance and
repairs may only be carried out by
suitably qualified and competent
persons to ensure safety.
corresponds to the voltage and
frequency of the household supply. This Repairs and other work by unqualified
data must correspond in order to avoid
risk of damage to the appliance.
Consult a qualified electrician if in
doubt.
persons could be dangerous and the
manufacturer will not be held liable.
Ensure that current is not supplied
to the appliance while maintenance
or repair work is being carried out.
The electrical safety of this
appliance can only be guaranteed
when continuity is complete between
the appliance and an effective earthing
system, which complies with local and
national safety regulations. It is most
important that this basic safety
The appliance is only completely
isolated from the electricity supply
when:
– the plug has been withdrawn. Do not
pull on the cable, only on the plug.
requirement is tested regularly and
where there is any doubt the household
wiring system should be inspected by a
qualified electrician. The manufacturer
cannot be held liable for the
consequences of an inadequate
earthing system (e.g. electric shock).
– the mains fuse is withdrawn, or
– the screw-out fuse is removed in
countries where this is applicable.
Do not connect the appliance to
the mains electricity supply by an
extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Safe operation of the appliance is
only assured if it has been installed
and connected in accordance with
these operating and installation
instructions.
Operation
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans, aircraft
etc. However it may be suitable for
such usage subject to a risk
assessment of the installation being
carried out by a suitably qualified
engineer.
Never handle frozen food with wet
hands. Your hands may freeze to
the frozen food. Danger of frost burn.
Do not take ice cubes out with your
bare hands and never place ice
cubes or ice lollies in your mouth
straight from the freezer.
The very low temperature of the frozen
ice or lollies can cause frost burn to the
lips and tongue.
9
Warning and Safety instructions
Do not refreeze thawed or partially
thawed food. Defrosted food
should be used up as quickly as
possible as food soon loses its
nutritional value and goes off. Defrosted
food may only be re-frozen after it has
been cooked.
Do not use sharp edged objects to
– remove frost and ice,
– separate frozen foods and remove
ice trays.
They will damage the evaporator
causing irreversible damage to the
appliance.
Do not store explosive materials in
the appliance or any products
containing propellants (e.g. spray
cans). Switching on thermostats may
produce sparks which could present a
fire hazard.
Never place electric heaters or
candles in the appliance to defrost
it. These can damage the plastic parts.
Do not use defrosting sprays, or
de-icers as they could contain
substances which could damage the
plastic parts and which may cause the
build up of gases and pose a danger to
health.
If storing alcohol with a high
percentage proof, make sure it is
tightly closed and stored upright.
Danger of explosion.
Do not store cans or bottles
containing carbonated drinks or
liquids which could freeze in the
freezer. The cans or bottles could
explode.
Danger of injury and damage to the
appliance.
Do not use any oils or grease on
the door seals as these will cause
the seals to deteriorate and become
porous with time.
Do not store cooking oil in the
appliance door. Traces of oil can
cause stress cracks to occur in the
plastic components in the door.
When cooling drinks quickly in the
freezer make sure bottles are not
left in for more than one hour, otherwise
they could burst. Danger of injury and
damage to the appliance.
Do not block the ventilation gaps in
the appliance as this would impair
the efficiency of the appliance, increase
the electricity consumption and could
cause damage to the appliance.
Observe the "use by" dates given
on food to avoid the risk of food
poisoning.
Storage times will depend on several
factors including the freshness and
quality of the food as well as the
temperature at which it is stored. Follow
the instructions given on food
manufacturer’s packaging on storage
conditions required as well as the "use
by" date.
10
Warning and Safety instructions
The appliance is designed for a
Disposal of your old appliance
use within certain climate ranges
(ambient temperatures). It must not be
used in ranges for which it is not
designed. The climate range for your
appliance is stated on the data plate
inside the appliance.
Installing it in a room with too low an
ambient temperature will lead to the
appliance switching off for longer
periods so that it cannot maintain the
required temperature.
Before disposing of an old
appliance first make the door latch
or lock unusable.
This way you will prevent children from
accidentally locking themselves in and
endangering their lives.
Before disposing of an old
appliance, unplug it and render the
plug useless. Cut off the cable directly
behind the appliance and at the plug to
prevent misuse.
Never use a steam-cleaning
appliance to defrost or clean this
appliance. Pressurised steam could
reach the electrical components and
cause a short circuit.
Be careful not to damage any part
of the pipework whilst awaiting
disposal, e.g. by
– puncturing the refrigerant channels
in the evaporator.
In countries where there are areas
which may be subject to infestation
by cockroaches or other vermin, pay
particular attention to keeping the
appliance and its surrounding in a
clean condition at all times. Any
damage which may caused by
– bending any pipework.
– scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
cockroaches or vermin will not be
covered by the appliance guarantee.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
11
Switching on and off
Before using for the first time
Freezer section
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
^ Press the On-Off button for the
freezer section.
To ensure correct functioning of the
appliance, let it stand for between ½
and 1 hour after transporting it to its
final location before connecting it to
the mains. This is important for the
correct functioning of the appliance.
Bars appear in the temperature display
for the freezer section and the alarm
sounds. The freezer section starts
cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Switching on
The refrigerator and freezer sections
are switched on independently of one
another so that, if required, you can
switch on only one section.
Switching off the alarm
Refrigerator section
^ Press the alarm button.
The alarm stops. The bars will continue
flashing in the temperature display until
the temperature which has been set is
reached.
^ Press the On-Off button for the
refrigerator section.
Bars will appear in the temperature
display for the refrigerator section. The
refrigerator section starts cooling. The
interior light will come on when the door
is opened.
Cool pack
Place the cool pack in the top drawer of
the freezer section. The cool pack will
be at its most effective after it has been
in the freezer for approx. 24 hours.
12
Switching on and off
Switching off
Switching off for longer
periods of time
^ Press the On-Off button.
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday,
The temperature display goes out and
the cooling process is switched off. (If
this does not happen, the safety lock is
still engaged).
^ switch the appliance off at the mains,
^ remove the plug (pull on the plug and
not the cable),
Safety lock
The safety lock can be engaged to
prevent the appliance being switched
off inadvertently.
^ clean the appliance out and
^ leave the doors ajar to air the
appliance.
To activate the safety lock
If, during a long absence, the
appliance is switched off but not
cleaned out and the doors are left
shut there is a danger of mould and
odours building up inside the
appliance.
^ Press and hold the alarm button.
^ Then press the Super freeze button
as well and keep both buttons
pressed in for approx. 3 seconds
until the Safety lock indicator light d
in the temperature display lights up
and a beep sounds.
Now the appliance cannot be switched
off until the lock is de-activated.
De-activating the safety lock
^ Repeat the same procedure as for
engaging the lock given above.
The safety lock indicator light must go
out in the temperature display. The
appliance can now be switched off at
any time.
13
The correct temperature
It is very important to set the correct
temperature for storing food in the
appliance. Micro organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro organisms. Reducing the
temperature reduces their growth rate.
. . . in the freezer
For freezing fresh food and storing
frozen food for a long time a
temperature of at least -18 °C is
needed. At this temperature the growth
of micro organisms is generally halted.
As soon as the temperature rises to
above -10 °C, the micro organisms
become active in the food again so that
it cannot be kept as long. Partially
defrosted or defrosted food must not be
re-frozen. Food may be re-frozen once
it has been cooked as the high
The temperature in the appliance will
rise:
– the more often the door is opened
and the longer it is kept open,
– if too much food is stored in it at
once,
temperatures achieved when cooking
destroy most micro organisms.
– the warmer the food is which is being
put into it,
Temperature selection
The temperatures for the refrigerator
section and for the freezer section are
set independently from one another
using the buttons to the right and left
hand sides of the temperature displays.
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
Press the:
. . . in the refrigerator section
and in the Stayfresh (0 °C)
zone
upper button: to raise the temperature
(it gets warmer)
We recommend a temperature of 5 °C
in the middle of the refrigerator section.
lower button: to reduce the
temperature
The temperature in the Stayfresh (0 °C)
zone is controlled automatically and is
held at approx. 0 °C.
(it gets colder)
The temperature being set will flash in
the display.
14
The correct temperature
When pressing the buttons the
following are shown in the display:
Setting the temperature in the
Stayfresh (0 °C) zone
– When first pressed the last
The temperature in the Stayfresh (0 °C)
zone is automatically held at approx.
0 °C. It can be raised or lowered, e.g. if
you want to use it for storing items like
fish.
temperature selected flashes.
– Each subsequent press of the button
adjusts the temperature shown in
1 °C steps.
– Keeping the button pressed in
adjusts the temperature continually.
Approx. 5 seconds after letting go of
the button the current actual
temperature of the refrigerator or
freezer section is automatically shown.
^ Press the alarm button for approx. 7
seconds until a "b" shows in the
temperature display for the
refrigerator section and a "0" shows in
the temperature display for the
freezer section.
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
display as it will take this long for the
display to show the accurate
temperature in the appliance. If the
temperature displayed is too low or too
high, then adjust the temperature once
more.
To adjust the temperature use the
buttons to the right of the freezer
section temperature display.
Press the
Temperature range
The temperature can be adjusted:
Upper button: to raise the temperature
(it gets warmer)
Lower button: to reduce the
temperature (it gets colder)
– in the refrigerator section from
4 °C to
9 °C
– in the freezer section from
- 14 °C to
- 28 °C
The ambient temperature of the room
and installation location can affect the
time it takes to reach the lowest
temperature. If the ambient temperature
is too high, then the appliance may not
be able to reach the lowest
temperature.
15
The correct temperature
The temperature is adjustable in steps
from -5 to +5 and is displayed in the
freezer section temperature display.
Each step represents a change in
temperature of approx. 0.5 to 1 °C. If
there is a "-" in front of the figure, the
temperature has been lowered by this
amount.
This loss of coldness is no cause for
concern in the following circumstances:
– when the door has been left open for
a while, e.g. for removing or storing a
large amount of food,
– when fresh food is being frozen.
However, if the temperature remains
above -18 °C for a long time, check that
the frozen food has not started to
defrost. If this is the case, check that
the food is safe to use and if it is, then
use it as soon as possible.
^ Press the alarm button briefly.
The new temperature has now been
stored in the appliance’s memory.
The appliance will automatically
return to normal operation after
approx. 5 minutes, if you do not
press any buttons whilst in setting
mode.
Temperature display brightness
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
Temperature displays
During normal operation the
temperature display on the control
panel shows the temperature in the
middle of the refrigerator section and
the temperature in the warmest part of
the freezer section.
The level of brightness can be adjusted
to be:
– Brighter: by pressing the alarm
button, and whilst holding it in press
the upper button next to the
temperature display for the freezer
section.
If the temperature in the appliance is
not within the range that the appliance
is able to display (i.e. if it is not between
0 °C and 19 °C in the refrigerator
section, and if the temperature in the
freezer section is above 0 °C), then only
a bar will light up in the temperature
displays.
– Dimmer: by pressing the alarm
button, and whilst holding it in press
the lower button next to the
temperature display for the freezer
section.
The temperature displays flash, if
– a different temperature is being set,
– the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
16
Alarm
Your appliance has been fitted with a
warning system which ensures that the
temperature in the freezer section
cannot rise unnoticed. It is always
active. If the temperature in the freezer
gets too warm an alarm will sound and
the temperature display for the freezer
section will flash. The temperature the
appliance is set at determines the
temperature the appliance recognises
as being too warm.
Switching the alarm tone off
early
Once the set temperature has been
reached in the freezer section, the
alarm tone stops and the temperature is
displayed constantly. However, if the
noise disturbs you, you can turn the
alarm tone off before this if you wish.
The alarm will sound and the
temperature display will flash:
– when the freezer is switched on.
^ Press the alarm button. The alarm
stops. The temperature display
continues to flash until the set
temperature has been reached. It
then lights up constantly. It does not
go out until the set temperature range
has been reached.
– when the freezer section door has
been left open for a while, e.g. in
order to load, to re-arrange or to take
food out.
– when freezing large amounts of food.
– when there has been a lengthy
interruption to the power supply.
17
Super cool and Super freeze
Super cool
Freezing fresh food
The super cool function can be used to Fresh food should be frozen as quickly
rapidly reduce the temperature in the
refrigerator section to its lowest setting
(depending on the room temperature).
as possible. This way the nutritional
value of the food, its vitamin content,
appearance and taste are not impaired.
Food which takes a long time to freeze
will lose more water from its cells which
then shrink.
Switching on super cool
Super cool is particularly
recommended for faster chilling of
large amounts of fresh food or drink.
During the defrosting process only
some of this water is reabsorbed by the
cells. The rest collects around the food.
In practice this means that the food
loses a large degree of its moisture.
If food is frozen quickly the cells have
less time to lose moisture so they shrink
less. As there is not so much moisture,
it is easier for the food to reabsorb it
during the defrosting process. There
will be very little water around the
defrosted food.
^ Press the super cool button, the
super cool indicator light will come
on.
The appliance works at full power to
lower the temperature in the
refrigerator section.
Super freeze is not necessary:
– when putting in frozen food.
Switching off super cool
– when freezing up to 2 kg fresh food
daily.
The super cool function switches itself
off automatically after approx. 6 hours.
The indicator light goes out and the
appliance continues running at normal
power.
To save energy the super cool function
can be switched off once food and
drinks are sufficiently chilled.
^ Press the super cool button. The
super cool indicator light will go out.
The appliance continues running at
normal power.
18
Super cool and Super freeze
Switching on super freeze
Switching super freeze off
Switch the super freeze function on
before putting fresh food into the
freezer.
Depending on the amount of food
placed in the freezer the super freeze
function will switch off automatically
after approx. 30 to 60 hours. The super
freeze indicator light will go out and the
appliance will continue running at
normal power.
When freezing small quantities of food
in the freezer, the super freeze function
should be switched on 4 - 6 hours
beforehand. When freezing the
maximum load of food the super
freeze function should be switched on
24 hours beforehand.
^ Press the super freeze button. The
super freeze indicator light will come
on.
The freezer section works at full
power to lower the temperature in the
freezer section.
19
Using the refrigerator section efficiently
Different storage zones
Do not store explosive materials in
Natural air circulation gives rise to
different temperature zones inside the
refrigerator section. Cold, heavy air
sinks to the lowest section of the
appliance. Make use of the different
zones when placing food in the
appliance.
the appliance or any products
containing propellants (e.g. spray
cans). Danger of explosion.
If storing alcohol with a high
percentage proof, make sure it is
tightly closed, and store upright.
Warmest area
Do not store cooking oil in the
refrigerator door.
Traces of oil can cause stress
cracks to occur in the plastic
components in the door.
The warmest area is in the top section
of the door. Use this for storing butter
and cheese.
Coldest area
Food must not touch the back wall of
the appliance. Otherwise it may
freeze to the back wall.
The coldest area in the refrigerator
section is normally directly above the
vegetable containers. In this appliance,
however, the coldest area is in the
Stayfresh (0 °C) zone.
Stayfresh (0 °C) zone
A temperature of between 0 - 3 °C
combined with a high humidity level
provides the optimum storage
conditions for fresh food, enabling it to
be kept fresher for longer than in the
refrigerator section.
Use the coldest areas in the refrigerator
section and in the Stayfresh (0 °C)
zone for all delicate and highly
perishable food, e.g.
– fish, meat, poultry,
The freshness of food when first placed
in the appliance is an important factor
in determining how long it stays fresh.
Bear this in mind when shopping.
– sausage products, ready meals,
– dishes or baked goods containing
eggs or cream
– fresh dough, cake mixtures, pizza or
quiche dough,
The temperature in the Stayfresh (0 °C)
zone is automatically held at approx.
0 °C.
– soft cheese and other dairy
products,
– pre-packed vegetables and other
fresh food with a label stating it
should be kept at a minimum
temperature of 4 °C.
20
Using the refrigerator section efficiently
The Stayfresh (0 °C) Zone is divided
High humidity level -
into two areas:
^ To set a humidity level of approx.
90 % slide the control for the humidity
controlled compartment over to the
right -.
– The dry compartment with a relative
humidity level of approx. 45 %.
– The humidity controlled
compartment has a control for
setting the humidity level between
45 % and 90 %. Slide the control to
the humidity level you require.
This humidity level is suitable for storing
fresh produce such as vegetables,
salad, herbs, and seasonal fruit.
Store these types of food uncovered
in the compartment.
The humidity level will also be affected
by the moisture content of the food
being stored and how often the
compartment is opened.
Food which should not be
stored in a refrigerator
Low humidity level ,
Not all food is suitable for refrigeration.
These include:
^ To set a humidity level of approx.
45 % slide the control for the humidity
controlled compartment over to the
left ,.
– Fruit and vegetables which are
sensitive to cold, such as bananas,
avocado pears, papaya, passion
fruit, aubergines, peppers, tomatoes
and cucumbers
This humidity level is suitable for storing
particularly delicate food such as fresh
fish, shell fish, meat, poultry, sausage,
dairy products and delicate salads.
– Fruit which is not yet ripe
– Potatoes
Keep food covered or packaged in
this compartment with the exception
of meat.
– Some hard cheeses
21
Using the refrigerator section efficiently
Storing food correctly
Different types of unpacked meats
and vegetables must be kept
separate.
Store food covered or packaged. This
will prevent food smells or tastes from
affecting other foods and prevent food
from drying out. The growth of bacteria,
such as salmonella, can be avoided by
setting the correct temperature and
maintaining good standards of hygiene.
To avoid any microbiological cross
contamination these foods may only be
stored together if they are wrapped.
Protein rich foods
Please note that foods rich in protein
deteriorate faster than others.
Shell fish for example deteriorates
faster than fish, and fish deteriorates
faster than meat.
Fruit and vegetables
Fruit and vegetables can be stored
loose in the vegetable containers.
However, you should bear in mind that
some types of fruit and vegetables give
off a natural gas which speeds up the
rate at which food perishes. Some fruit
and vegetables react stongly to this
gas and should not be stored together
in the vegetable containers.
Meat
Store meat in suitable containers, but
uncovered in the low humidity
compartment. (Undo wrappings and
leave containers open.) The surface of
the meat will dry out slightly and protect
it from bacterial growth thus increasing
its storage qualities. To prevent the risk
of bacterial contamination keep meat
stored in suitable containers and do not
let different types of meat come into
direct contact with each other.
Examples of fruit which produce a
large amount of this natural gas are:
Apples, apricots, pears, nectarines,
peaches, plums, avocado pears and
figs.
Examples of fruit and vegetables
which react strongly to the natural
gases given off by other types of fruit
and vegetables are:
Take food out of the Stayfresh (0 °C)
zone approx. 30 - 60 minutes before
using it. The aroma and taste do not
fully develop until the food has
reached room temperature.
Kiwis, broccoli, cauliflower, brussels
sprouts, mangos, honeydew melons,
apples, apricots, cucumbers, tomatoes,
pears, nectarines and peaches.
22
Using the refrigerator section efficiently
Energy saving tips
– Frequently opening the door or
keeping it open for too long will
cause the temperature in the
appliance to rise. The appliance will
have to run more often in order to
maintain the cool temperature inside
the appliance. Only open the door
when you need to and then only for
as long as necessary.
– If you organise where you store your
food correctly you should be able to
find things quickly and easily without
allowing the temperature in the
appliance to rise. Sort the food out
carefully before putting it into the
appliance.
– Hot food and drinks must be cooled
to room temperature before placing
them in the appliance.
– Do not store groceries too close to
each other. Space should be left
between individual items for air to
circulate.
23
Adjusting the interior fittings
Moving the shelves
Adjusting the door shelves
The shelves can be adjusted according ^ Push the door shelf upwards then
to the height of the food.
remove it by pulling it forwards.
^ Pull the shelves forward as far as
they will go then lift them upwards to
remove them.
^ Replace the door shelf at the
required position. Ensure that it is
securely pushed back into position.
^ With the rear barrier facing upwards
place the shelf at the required
position.
The rear barrier must face upwards to
prevent food from touching the back
of the appliance and freezing to it.
Moving the bottle divider
The bottle divider can be moved to the
left or right to ensure that bottles are
held securely in position when the door
is opened and shut.
Split shelf
Stayfresh (0 °C) zone
compartments
(depending on model)
^ When loading and unloading items,
pull the compartment right out by
taking hold of it at the back and lifting
it up to remove it.
In order to accommodate tall items in
the appliance one of the shelves is
divided. The front half of the shelf can
be pushed carefully under the rear half.
Tall items can then be placed on the
shelf below.
^ To put it back in, pull the runners a
right out and place the compartment
on top of the runners. The front of
the runners must be right up
against the front of the
compartment b. Push the
compartment back in c.
24
Freezing and storing food
Maximum freezing capacity
Home freezing
To ensure that fresh food placed in the
freezer freezes through to the core as
quickly as possible, the maximum
freezing capacity must not be
Only freeze fresh food which is in a
good condition.
Hints on home freezing
exceeded. The maximum freezing
capacity for freezing within a 24 hour
period is given on the data plate
"Freezing capacity ....kg/24 hrs".
– The following types of food are
suitable for freezing:
Fresh meat, poultry, game, fish,
vegetables, herbs, fresh fruit, dairy
products, pastry, leftovers, egg
yolks, egg whites and a range of
pre-cooked meals.
Storing frozen food
When buying frozen food to store in
your freezer check
– The following types of food are not
suitable for freezing:
– that the packaging is not damaged,
– the use by date,
Grapes, lettuces, radishes, sour
cream, mayonnaise, eggs in their
shells, onions, whole raw apples and
pears.
– the temperature at which the frozen
food is being stored in the shop. The
length of time it can be kept is
– To retain colour, taste and vitamin C,
vegetables should be blanched after
they have been trimmed and
reduced if it has been stored at a
temperaure warmer than -18 °C.
washed. To blanch: bring a large
saucepan of water to the boil,
immerse the vegetables in the fast
boiling water for 2-3 minutes,
depending on variety. Remove and
cool quickly in cold water. Drain and
pack ready for freezing.
^ Buy frozen food once you have
finished the rest of your shopping
and wrap it in newspaper or use a
cool bag or box to transport it.
^ Store it in the freezer as soon as
possible.
– Lean meat freezes better than fatty
meat and can be stored for
considerably longer.
Never re-freeze partially or fully
defrosted food. Consume defrosted
food as soon as possible as it will
lose its nutritional value and spoil if
left for too long. Defrosted food may
only be re-frozen after it has been
cooked.
– To prevent chops, steaks, cutlets or
rolled meat from freezing together in
solid blocks when packed, separate
with a sheet of plastic freezer film.
25
Freezing and storing food
– Do not season fresh foods or
blanched vegetables before
^ Make a note of the contents and the
date of freezing on the packaging.
freezing. Only season cooked food
lightly before freezing but care
should be taken as the taste of some
spices alters when frozen.
Before placing food in the freezer
^ When freezing more than 2 kg of
fresh food, switch on the super freeze
function for some time before placing
the food in the freezer (see "Super
freeze").
– Do not place hot foods or drinks in
the freezer. This causes already
frozen food to thaw and increases
the energy consumption
considerably. Allow hot foods and
drinks to cool down before placing
them in the freezer.
Placing food in the freezer
Food to be frozen can be placed
anywhere in the freezer. Large
quantities can be placed directly on the
separator shelf to freeze the food
quickly. To do this first take out the
upper or middle freezer drawer. The
lowest freezer drawer must always
remain in the appliance.
Packing
Unsuitable packing material
- wrapping paper
- grease-proof paper
- cellophane
- bin bags
- plastic carrier bags
Each drawer and separator shelf
can be loaded with a maximum of
25 kg.
Suitable packing material
- plastic freezer film
- freezer bags
- aluminium foil
- freezer containers.
If you remove the upper freezer
drawer make sure that you do not
cover the ventilation holes in the rear
wall of the appliance. They are
important for trouble-free operation
of the appliance.
^ Freeze food in portions.
^ Expel as much air as possible from
bags etc. before sealing them to
prevent freezer burn on food.
^ Make sure that the packaging and
containers are dry to prevent them
sticking together when frozen.
^ Close the packaging tightly with
- rubber bands
- plastic clips
- string or bag ties
- freezer tape
When freezing, make sure that food
already frozen does not come into
contact with fresh food being frozen
as this could cause the frozen food
to begin to defrost.
Freezer bags may also be sealed
using home heat sealing kits.
26
Freezing and storing food
When freezing large items e.g. a turkey Marker system for frozen food
or a large joint of meat, one of the
Markers serve as a reminder of how
separator shelves can be removed to
long food has been stored.
give more room.
Each freezer drawer has two slide
markers with dials. The months are
represented on the dials as 1 - 12.
^ Remove the drawers above and
below the separator shelf.
^ Press down on the hook a
underneath the rear of the separator
shelf and pull the shelf forwards and
^ Slide the markers onto the guide
runners on the edge of the drawers.
out b.
Use the markers to indicate the type of
food being frozen and turn the dials to
the appropriate number to indicate the
month the food was first placed in the
freezer.
To put the separator shelf back in, push
it back into place making sure it audibly
clicks into position.
Freezer calendar
The freezer calendar on the freezer
drawer gives the length of time which
various foods can be stored for
effectively.
Defrosting
Frozen food can be defrosted in
different ways:
– in the microwave oven,
Where the storage time given on the
packaging differs, follow the advice on
the packaging.
– in the oven using the "Fan" or
"Defrost" setting,
– at room temperature,
– in the fridge.
27
Freezing and storing food
Poultry It is particularly important to
observe food hygiene rules when
defrosting poultry. Do not use the liquid
from defrosted poultry. Pour it away and
wash the container it was in, the sink
and your hands.
^ Once frozen, use a blunt instrument,
for example a spoon handle, to
remove the ice tray from the freezer.
^ Ice cubes can be removed easily
from the tray by holding it under cold
running water for a short while.
Fruit should be defrosted at room
temperature in its packing or in a
covered bowl.
Cooling drinks
Drinks are best cooled quickly in the
refrigerator section using the Super
cool function. If bottles are, however,
placed in the freezer for rapid cooling,
make sure bottles are not left in the
freezer for more than one hour, as they
could burst.
Most vegetables can be cooked while
still frozen. Just put straight into boiling
water or hot fat. The cooking time is
slightly less than that of fresh
vegetables.
Never re-freeze partially or fully
defrosted food. Consume defrosted
food as soon as possible as it will
lose its nutritional value and spoil if
left for too long. Defrosted food may
only be re-frozen after it has been
cooked.
Freezer tray
The freezer tray is useful for freezing
small items such as berries and
vegetables. They can be frozen
individually and therefore maintain their
shape when defrosted.
Ice cubes
^ Space the food out loosely on the
tray.
^ Press down the release button on the
ice cube tray and fill the tray with wa-
ter. Any excess will flow out through
the outlet.
^ Hang the tray in one of the upper
freezer drawers.
^ Now pull the release button up to
seal the ice cube tray. Place the tray
on the bottom of one of the freezer
drawers.
Leave food for 10 - 12 hours to freeze
thoroughly on the tray. Transfer it to a
freezer bag or suitable container once
frozen. Place the bag or container in
the freezer drawer.
28
Freezing and storing food
Cool pack
The cool pack prevents the
temperature in the freezer rising too
quickly in the event of a power cut.
Place the cool pack in the upper
drawer directly on top of food or to save
space on the freezer tray. The cool
pack will be at its most effective after it
has been in the freezer for approx. 24
hours.
If there is a power cut lay the cool pack
directly on top of the frozen food in the
upper drawer so that the food will be
kept cold for as long as possible.
When placing fresh food in the freezer,
use the cool pack to separate the fresh
food from the food which is already
frozen so that the frozen food does not
begin to thaw.
The cool pack can also be used in a
cool bag to keep food or drinks cool for
a short period of time.
29
Defrosting
Refrigerator section and
Stayfresh (0 °C) zone
Freezer section
This freezer is equipped with a
"No-frost" system. The freezer defrosts
automatically.
Condensate and frost can build up on
the back wall of the refrigerator section
and the Stayfresh (0 °C) zone whilst in
use. These are automatically removed
and defrosted by the appliance.
The moisture generated by defrosting
collects in the condensor and is
automatically dissipated by the
condensor from time to time.
The condensate is drained away via a
channel and drain hole into an
evaporation system at the back of the
appliance.
This enables the freezer section to
remain permanently ice-free while the
food remains frozen. Food stored in the
freezer will not defrost in the freezer.
Ensure that the condensate channel
and drain hole are kept clean and
are never blocked so that
condensate can flow away without
hindrance.
30
Cleaning and care
Cleaning the outer casing, the
interior and accessories
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Clean the appliance at least once a
month, using warm water with a little
washing up liquid. Accessories,
shelves and drawers should be hand
washed only. Do not wash in a
dishwasher. The butter dish is, however,
dishwasher safe.
For stainless steel surfaces, use a
proprietary stainless steel cleaning
agent.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
Make sure that no water can
penetrate into the electronic unit or
into the light.
^ Clean stainless steel surfaces with a
suitable cleaning agent.
Do not let water get into the
drainage channel and drain hole
when cleaning.
^ After cleaning, wipe the outer casing,
the interior and accessories with a
damp cloth and dry with a soft cloth.
Leave the doors open to air the
appliance for a short while.
Do not use steam cleaning
apparatus to clean the appliance.
Pressurised steam could reach the
electrical components and cause a
short circuit.
E-Cloth
^ A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department, Part Number 980 13530,
which is suitable for cleaning
surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
Before cleaning
If you are unsure about a particular
product or need further advice
please contact your nearest Miele
Sales office. See back page for
address.
^ Switch the appliance off by pressing
both On-Off switches and remove the
plug.
^ Take any food out of the appliance
and store it in a cool place.
^ Take out any removable parts e.g.
shelves for cleaning.
31
Cleaning and care
Ventilation grilles
After cleaning
^ The ventilation grilles should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the appliance's energy
consumption.
^ Replace all shelves and accessories
in the refrigerator section and the
StayFesh zone.
^ Place food back in the refrigerator
section and the StayFresh zone,
close the appliance doors, and
switch the refrigerator section and
the freezer section on.
Door seals
Do not use any grease or oil on the
door seals as these will cause the
seals to deteriorate and become
porous over time.
^ Switch on the super freeze function
so that the freezer section can cool
down quickly. The super freeze
indicator light will come on.
The door seals should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
^ Once the temperature in the freezer
has reached the required
temperature place the food back in
the freezer drawers and place them
back in the freezer.
Metal grille at the back of the
appliance
^ Switch off the super freeze function
by pressing the super freeze button.
The indicator light will go out.
The metal grille at the back of the
appliance (heat exchanger) should be
dusted at least once a year. A build-up
of dust will increase the energy
consumption of the appliance.
When cleaning the grille, make sure
that the pipework and other
components do not get broken or
damaged in any way.
32
Problem solving guide
^ Are any bottles or containers
unstable or knocking against each
other?
Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in accordance with local and
national safety regulations. Repairs
and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable
for unauthorised work.
Remember that the noise of the
compressor and the coolant circulating
in the system is unavoidable.
. . . the appliance refrigerator or
freezer section does not get cool.
^ Check whether the respective section
is switched on. The relevant
temperature display must be lit up.
The following can be corrected without
contacting the Miele Service
Department:
^ Check that the plug is correctly
inserted in the socket.
What to do if . . .
^ Check that the fuse is not defective
and that the mains fuse has not
blown. If it has, consult the Miele Ser-
vice department.
. . . strange noises can be heard after
switching on the appliance,
especially after it has just been
installed.
. . . the door to the freezer section will
not open because it has been opened
and closed too many times in
succession.
^ Check to see whether any pieces of
furniture next to the appliance are
vibrating whilst the appliance is in
operation.
This is not a fault. The suction caused
by opening and closing the door is
preventing the door from opening. Wait
a few minutes and then try again. It
should now open without force.
Switch the appliance off then:
^ Check whether the appliance is
aligned correctly.
^ Check whether all parts at the rear of
the appliance are free from
hindrance. Remove any hindrance.
. . . the temperature in the refrigerator
section or freezer section is too low.
^ Check whether the cable clips were
unclipped from the back of the
appliance before installation. They
could vibrate when the appliance is
operating.
^ Select a warmer temperature.
^ The super freeze or super cool
function has not been switched off.
The respective indicator light is still
on.
^ Are all removable parts securely
located in the appliance?
33
Problem solving guide
. . . the appliance is switching in too
frequently and for too long.
. . . a bar is lit up or flashing in the
temperature displays.
^ Check whether ventilation gaps have Check the temperature displays about
been covered over or become too
dusty.
6 hours after switching on the
appliance. The display will not show a
temperature until the temperature in the
appliance has reached a certain level.
^ Check whether, the metal grille (heat
exchanger) at the rear of the
appliance has become too dusty.
. . . the following messages show in
^ The doors have been opened too
frequently, or a large amount of fresh
food has been put in at once for
freezing.
the temperature display "F0" to "F5".
There is a fault. Call the Service
Department.
^ Check that the doors have been
. . . the following message appears in
closed properly.
the temperature display: "nA" .
^ Check whether a thick layer of ice
has built up. If it has then the freezer
will need defrosting.
The freezer section temperature has
risen too high at some point during the
last couple of days because of a power
cut.
. . . the alarm sounds and the freezer
section temperature display flashes.
^ Press the alarm button whilst "nA" is
lit up in the display.
The freezer section temperature has
risen above the temperature set
because
The temperature display will show the
warmest temperature recorded in the
freezer section during the power cut.
^ the freezer section door has been
opened too frequently, or large
amounts of fresh food have been put
in at once for freezing.
Depending on the temperature
displayed you should check the
condition of food in the freezer. If it has
defrosted or started to defrost check
that it is still safe to use and if so use it
as soon as possible. Defrosted food
may only be re-frozen after it has been
cooked.
^ the ventilation gaps are blocked.
^ there has been a lengthy interruption
to the power supply.
Once the problem has been resolved
the temperature display for the freezer
will light up constantly and the alarm
will go off.
The warmest temperature will show in
the display for about 1 minute. The
actual current temperature in the
freezer section will then show in the
display again.
34
Problem solving guide
. . . the super freeze or super cool
indicator light is not lit up although
the appliance is working.
^ Replace the lamp.
Lamp specification:
220 - 240 V, max. 25 W, E 14 fitting.
The indicator light is defective. Call the
Service Department.
. . . you cannot switch the appliance
off.
The safety lock has been activated.
. . . the interior light is not working.
^ Was the refrigerator section door left
open for too long? The lighting
switches itself off automatically after
approx. 15 minutes.
^ Screw the new lamp into the
connection. Ensure it goes in
correctly.
^ Replace the cover by clipping it in at
the rear and then pressing it in at the
sides.
If this is not the case, then the lamp is
defective:
^ Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket
(pull by the plug not the cable), or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable.
. . . the floor of the refrigerator
section is wet.
The drain hole is blocked.
^ Clean the condensate channel and
drain hole.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
To prevent unecessary loss of
temperature it is advisable not to
open the door while waiting for the
appliance to be serviced.
^ Press the sides of the lamp cover
inwards, disengage the cover and
unclip it at the rear.
35
After Sales Service
In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee please contact:
– Your Miele Dealer
or
– The Miele Service Department
(see back cover for address).
When contacting the Service
Department, please quote the model
and serial number of your appliance,
both of which are shown on the data
plate.
Please note that telephone calls may
be monitored and recorded to
improve our service.
36
Electrical connection
Electrical connection U.K.
Important
The appliance is supplied with a mains
cable and moulded plug ready for
connection to an a.c. single phase
220 – 240 V 50 Hz supply.
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow = earth
The fuse rating is 13 amps.
Blue
Brown
= neutral
= live
All electrical work should be carried
out by a suitably qualified and
competent person in accordance
with local and national safety
regulations.
Connection should be made via a
fused plug and suitable switched
socket which is easily accessible.
For extra safety it is advisable to
install a residual current device
(RCD) with a trip current of 30 mA (in
accordance with DIN VDE 0664,
VDE 0100, Section 739).
As the colours of the wires in the mains
lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
The wire which is coloured green and
yellow must be connected to the
terminal in the plug which is marked
with the letter E or by the earth symbol
(z) or coloured green or green and
yellow.
The wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black.
Do not connect the appliance to the
mains electricity supply by an extension
lead. Extension leads do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
The wire which is coloured brown must
be connected to the terminal which is
marked with the letter L or coloured red.
The appliance must not be connected
to an inverter and must not be used
with a plug adapter as these can cause
damage to the appliance’s electronic
unit.
WARNING
THIS APPLIANCE MUST BE
EARTHED
37
Electrical connection
Non-rewireable plugs (BS 1363)
If this machine is fitted with a
non-rewireable plug, the following
information applies:
If the socket outlets are not suitable for
the plug supplied with this product, it
must be cut off and an appropriate plug
fitted.
The fuse carrier and the fuse should be
removed from the old plug and
disposed of. The old plug should then
be disposed of and on no account be
inserted into any socket elsewhere in
the house (electric shock hazard).
The fuse cover must be re-fitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words in the base of the
plug (as applicable to the design of the
plug fitted).
The correct fuse rating of the
replacement fuses that are ASTA
approved to BS 1362 should be fitted.
Replacement fuse covers may be
purchased from your local electrical
supplier, or Miele Service agent.
38
Installation
Operating in a room which is too cold
will cause the cooling system to switch
off for too long causing the internal
temperature in the appliance to rise
with the risk of food deteriorating and
going off.
Appliances without side wall heating
must not be installed "side-by-side"
next to another refrigerator or
freezer.
Location
Ventilation
It should not be installed where it is
exposed to direct sunlight or directly
adjacent to a heat-producing appliance
such as an oven or a radiator. The
appliance should be installed in a dry
well ventilated room.
The room temperature should not go
above or below the climate range for
which the appliance is designed. The
higher the ambient temperature of the
room the more energy the appliance
requires to operate.
Air at the rear of the appliance gets
warm. To ensure sufficient ventilation
the ventilation gaps must not be
covered over. The air inlet and outlet
must not be covered or blocked in any
way. They should be dusted on a
regular basis.
Fitting the handles
If the door hinging does not require
changing the handles should now be
fitted to the appliance doors.
Do not place any appliance which
gives off heat, such as a toaster or
microwave oven on top of this
appliance, as this would increase
the appliance's energy
consumption.
Climate range
The appliance is designed for a use
within certain climate ranges (ambient
temperatures) and should not be used
outside this range. The climate range of
this appliance is stated on the data
plate inside the appliance.
Klimaklasse
Raumtemperatur
SN
N
ST
T
+10 °C bis +32 °C
+16 °C bis +32 °C
+18 °C bis +38 °C
+18 °C bis +43 °C
^ Secure handle a to the holes in the
door using the screws marked b.
39
Installation
Installation
Aligning the appliance
^ Remove any cable clips from the rear
of the appliance.
^ Check that all parts at the rear of the
appliance are unhindered. Remove
any hindrance.
^ Carefully push the appliance into
position. The rear of the appliance
can be placed directly against a wall.
^ To align the appliance adjust the feet
using the spanner supplied.
40
Changing the door hinging
The appliance is supplied right hand
hinged. If left-hand door hinging is
required, follow the instructions below.
Now re-fit all parts on the opposite side:
^ Open the lower door.
^ Remove the cover plate a.
^ Unscrew bearing block b and refit it
on the other side (see illustration).
^ Use a screwdriver to lever plinth a
out, then pull it forwards and out.
^ Unscrew upper hinge pin c using
the spanner supplied and refit on the
oppositie side.
^ Use a screwdriver to remove cover
b, then close the door.
^ Remove screw c completely.
^ Place cover plate a on the other
side.
^ Pull door support d together with
hinge pin e downwards, then tilt it
forwards and take it off.
^ Exchange cover i in the middle of
the appliance with hinge bracket e.
To do this:
Undo screws h, pull cover i and
hinge bracket e off to the side, turn
around and refit into position on the
opposite side.
^ Open the lower appliance door, move
it downwards and take it off.
^ With the upper door g closed, pull
hinge pin f downwards to remove it.
^ Open the upper door, and pull it
downwards and off.
41
Changing the door hinging
^ Pull bearing bush d downwards out
of hinge bracket e and refit it from
above into the hinge bracket.
^ Use a screwdriver to remove spacer
g and refit it on the opposite side.
Changing over the door handle:
^ Remove covers m at the front and
slide off to the side.
^ Unscrew handle k. Refit handle and
stoppers l on the opposite side.
^ Slide covers m into position making
sure they engage correctly.
Refitting the doors:
^ Turn door support b around, pull
hinge pin a out, and refit on the
opposite side.
^ Remove plugs j from door bearing
bushes in the doors and refit on the
opposite side.
^ Hang the upper appliance door on
hinge pin c, and close the appliance
door.
^ Fit both parts into hinge plate f. To
do this push hinge pin a through
hinge plate f into door support b.
Swing door support out, push
upwards and re-assemble with screw
c.
^ Push middle hinge pin f from below
through hinge bracket e into the
upper appliance door.
^ Check that the door is correctly
aligned. If necessary align it using
the long slots in hinge bracket e.
^ Align the lower door with the
appliance housing using the long slot
in hinge plate f. Then tighten screw
c.
^ Hang the lower door in hinge bracket
e then close the appliance door.
^ Refit plinth fascia d pushing it firmly
into position.
In the following illustration the lower
door is not shown in the closed
position to make it easier to see
what happens next.
^ With the lower door open, secure
cover e to the front of the plinth
fascia.
42
Changing the door hinging
StayFresh zone
compartments
Make sure that the compartment lid
covers the compartment correctly.
^ Pull the compartment right out by
taking hold of it at the back and lifting
it up to remove it.
^ Pull the compartment lid a forwards.
^ Push the compartment lid in towards
the side that the appliance is going to
be opened from once the hinges
have been changed over b, and fit it
back on the runners.
^ Push the lid in until it engages c.
^ To put it back in, pull the runners a
right out and place the compartment
on top of the runners close up
against the door opening side. The
front of the runners must be right
up against the front of the
compartment b! The compartment
will click into position. You can now
push the compartment back in c.
43
Building in the appliance
The air inlet and outlet must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
When built into a kitchen run (max.
depth 580 mm) the appliance can be
installed directly next to a kitchen
furniture housing unit. The appliance
door b will protrude in front of furniture
fronts at the sides by 34 mm and by 51
mm in the middle of the door. This will
allow the doors to be opened and shut
without being obstructed.
When installed next to a wall c a gap
of approx. 36 mm is needed on the
hinge side between the wall and the
appliance, so that the doors and the
handles have sufficient space for
opening.
The appliance can be installed in a
kitchen run. To match the height of the
rest of the kitchen, the appliance can
be fitted with a suitable top box a.
When securing to adjoining furniture
d or if a spacer bar is fitted between
the appliance and the wall, please note
the following:
A ventilation gap of at least 50 mm
depth must be allowed for behind the
appliance for air to circulate.
^ Ensure that the doors have sufficient
space for opening fully after the
appliance has been secured.
The cross section of the air outlet under
the room ceiling must be at least
300 cm2 to ensure that air can circulate
without hindrance. Otherwise the
appliance has to work too hard
resulting in an increase in electricity
consumption. The larger the cross
section, the more efficient the
appliance.
^ Do not drill within the area marked
with criss cross pattern as this
would damage insulated parts of the
appliance.
^ To secure the appliance to adjoining
kitchen furniture use self-tapping
screws. The depth of the screw must
not exceed 10 mm. See small
illustration.
44
45
46
47
Alteration rights reserved / 1403
KF 7540 SN ed-3
M.-Nr. 05 969 270 / 00
This paper consists of cellulose which has been bleached without the use of chlorine.
|