Smartphone Connect App Guide
Premium Design Phone with Smartphone Connect
Model No.
KX-PRW110
KX-PRW120
Thank you for purchasing a Panasonic product.
This document explains how to use the Smartphone Connect app. For information
about the features of your phone system, refer to the Operating Instructions supplied
with your phone system.
Introduction
Smartphone Connect overview
You can install the free Smartphone Connect app on your smartphone and use your smartphone
as an extension of your phone system. The following features are available when using the app.
– Making and receiving calls using your landline
– Making and receiving intercom calls
– Playing answering system messages
– Checking your call log
– Copying contacts from your smartphone to your phone system
– Transferring landline calls between your smartphone and your handsets
– Copying images from your smartphone to your handsets to be used as wallpaper patterns
(Android version only)
– Copying the ringtone from your smartphone to your handsets (Android version only)
Requirements
R A compatible Panasonic phone system (see below)
R A wireless router (IEEE 802.11g or IEEE 802.11n recommended)
R iPhone 4, iPhone 4S, iPhone 5, iPad, or iPad mini (iOS 5.0 or later)
or
An Android device (Android 4.0 or later)
R The Smartphone Connect app; download information is available at the web page listed below
R You must configure both your base unit and your smartphone to connect wirelessly to your
home network via your wireless router. Refer to the Operating Instructions supplied with your
phone system for more information.
R In order to use most of the app’s features, your smartphone needs to be connected to the
same wireless router as your base unit. (You cannot use these features while away from
home.)
*1
Minimum recommended screen resolution: 1280´720. Screen text may not be displayed
properly when using a screen with lower resolution.
Functionality information
R The app may not function properly depending on system environment, such as your
smartphone model, peripherals connected to your smartphone, and the apps installed on your
smartphone.
Compatible Panasonic phone systems
– KX-PRW110
– KX-PRW120
Other information
R Design and specifications are subject to change without notice.
3
Introduction
R The illustrations, screenshots, and product interface text shown in this document are for
reference only and may differ from the actual product.
R The suffix is omitted from model numbers listed in this document.
R Mobile phone call features are not available when using iPad or an Android device that does
not support mobile phone calls. Other features may not be available depending on your
device’s specifications and limitations.
R This product contains Apache Commons Net 3.2, which is licensed according to Apache
configuration/.
R The End User License Agreement (EULA) for the Smartphone Connect app is available at the
Trademarks
R Android is a trademark of Google Inc.
R iPhone and iPad are trademarks of Apple Inc.
®
R The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of
such marks by Panasonic Corporation is under license.
®
R Wi-Fi is a registered mark of the Wi-Fi Alliance.
R All other trademarks identified herein are the property of their respective owners.
4
Getting Started
3
When prompted to register your
smartphone to the base unit, tap [Start].
R The app searches for base units
connected to the same wireless
Starting, exiting, and
registering
network as your smartphone. If no
base units are found, you can tap
[Search] to search again.
R If there is more than one unregistered
base unit connected to your wireless
network, select the desired base unit,
and then enter a name for the base
unit and handset when prompted.
Starting the app
Start the Smartphone Connect app by tapping
its icon (shown below).
4
Wait for the registration process to end.
R The app’s [Keypad] screen is
displayed when registration has ended.
Note:
R The end-user licence agreement is
displayed the first time you start the app.
R iPhone/iPad
Note:
If your device is not compatible with the
app, a message about incompatibility will
be displayed when you start the app.
R After registration, you can confirm that the
app is connected to the base unit by
checking the status bar icon (Android
R You can change the base unit name and
the handset name assigned to your
Exiting the app
iPhone/iPad
Exit the app using the multitasking bar.
Android
Tap or press the menu button on your
smartphone and then tap [Exit]. (The method
for opening the options menu depends on
your device.)
Registering to additional base units
Screen layout
The app contains the following screens. You
can switch between screens by tapping the
corresponding tab.
Registering your smartphone to
the base unit
The smartphone can be registered to a
maximum of 4 base units, and a maximum of
4 smartphones can be registered to each base
unit.
[Keypad]
Used to dial phone numbers and make calls
using your landline.
Registering for the first time
The first time you start the app, the app will
prompt you to register your smartphone to a
base unit.
[Call log]
1
Make sure that your smartphone’s Wi-Fi
feature is enabled and that your
smartphone is connected to the same
wireless network as your base unit.
Used to display a list of landline calls,
including outgoing, incoming, and missed
calls.
[Contacts]
2
Start the app.
Used to make calls to contacts stored in
your smartphone.
5
Getting Started
[More]
(iPhone/iPad)
Indicates that the app cannot connect
to the base unit. Make sure the base
unit is turned on and that the base
unit and your smartphone are within
range of your wireless router. See
page 19 for more troubleshooting
information.
[More]
(Android)
Used to access other app features, such as
answering system features, copying data
from your smartphone to your handsets,
changing settings, and displaying the app’s
help files (Internet connection required).
Indicates that there is a missed
landline call.
Indicates that there is a new
message in the answering system.
(KX-PRW120 only)
Opening the options menu
Indicates that the landline’s voice
mail service has recorded a new
message.
The options menu is available on certain
screens and provides access to additional
features and settings.
iPhone/iPad
Tap [Menu].
Android
Tap or press your smartphone’s menu
button. (The method for opening the options
menu depends on your device.)
Indicates that a landline call is being
received.
Indicates that you are talking on a
landline call or have a landline call on
hold. (Green icon)
Indicates that another handset (or
smartphone) is talking on a landline
call or has a landline call on hold.
(Red icon)
Status notifications
iPhone/iPad
Error messages and status notifications are
displayed in the iOS Notifications Centre.
Additionally,
is displayed in the [Keypad]
screen if the app cannot connect to the base
unit. Make sure the base unit is turned on and
that the base unit and your smartphone are
within range of your wireless router. See
page 19 for more troubleshooting
information.
Android
Error messages, status notifications, and the
following icons are displayed in your
smartphone’s status bar and notifications
panel.
Indicates that the app is connected to
a base unit and can be used to
access features of your phone
system.
6
Phone Features
2
3
4
Tap the desired contact, and then select
the desired phone number if necessary.
Making calls
Tap [Landline] or [Mobile] to select the
line you want to use to make the call.
You can use the app to make landline calls,
mobile calls, an intercom calls.
If you made a landline line call, tap
[Disconnect] to end the call.
Important:
R Your smartphone must be able to access
your base unit over the wireless network in
order to use most features of Smartphone
Connect. Make sure your smartphone’s
Wi-Fi feature is enabled.
Using other features
during a landline call
Dialling manually
Keypad
1
Start the app and open the [Keypad]
screen.
Tap [Keypad] during a call if you need to
enter numbers, such as when navigating a call
centre’s voice guided menu system. To hide
the keypad, tap [Cancel].
2
Enter the phone number.
R To erase a number, tap
.
R To enter a dialling pause, tap and hold
.
Audio output (speakerphone,
Bluetooth, headset)
3
4
Tap [Landline] or [Mobile] to select the
line you want to use to make the call.
iPhone/iPad
If you made a landline line call, tap
[Disconnect] to end the call.
Tap [Audio Source] to display a list of the
available devices, and then tap the desired
audio output device to switch to that device.
Android
Tap [Speaker] to turn your smartphone’s
speaker on and off during a call.
If a Bluetooth-compatible device is connected
to your smartphone, tap the audio icon
(speaker, Bluetooth, etc.) to switch between
the available devices.
Note:
R If you are talking on a landline call and then
receive and answer a mobile phone call,
the landline call is either disconnected or
put on hold, according to the [Landline call
R Make sure to tap [Disconnect] when
ending a landline call, even if the other
party hangs up first. Otherwise the
connection to the landline will not be
disconnected.
R If the base unit is busy when you try to
make a landline call, you may hear a busy
tone.
R If the base unit’s repeater mode is turned
on, landline calls and intercom calls may be
disconnected if your smartphone moves
between the wireless range of the wireless
router and the base unit.
Mute
Tap [Mute] during a call to mute your
smartphone’s microphone so that the other
party cannot hear you. Tap [Mute] again to
turn the mute off.
Hold
Tap [Hold] during a call to place the call on
hold. Tap [Hold] to return to the call.
Calling a contact
1
Start the app and open the [Contacts]
screen.
7
Phone Features
4
When finished, tap [Disconnect] to end
the call.
Recall
Tap [R] during a call to use your phone
system’s recall feature, such as to answer a
call waiting or to switch between two different
calls.
Note:
R You cannot make intercom calls to other
smartphones.
R iPhone/iPad
When you are talking on an intercom call,
the intercom call is disconnected
automatically if you receive a mobile phone
call.
Answering landline calls
R Android
Answering a landline call
When you receive a landline call, the call
receiving screen is displayed. Tap [Answer].
When you are talking on an intercom call,
the intercom call is disconnected
automatically if you answer a mobile phone
call.
Note:
R Make sure to tap [Disconnect] when
ending a call, even if the other party hangs
up first. Otherwise the connection to the
landline will not be disconnected.
R You can turn the ringer off temporarily by
tapping [Ring off]. Other handsets will
continue to ring.
R To change the ringtone heard for landline
R iPhone/iPad
If you want the app to receive calls even
when it is in the background, turn the [Keep
Alive in Background] setting on (see
When a call is received, your smartphone
behaves according to the app’s sound
Note that your device’s ring/silent switch
does not affect the app.
Transferring a landline call to a
handset
1
iPhone/iPad
While on a landline call, tap [Menu].
Android
While on a landline call, tap or press
your smartphone’s menu button.
2
3
Tap [Intercom].
Select the desired handset, and then wait
for the handset user to answer.
R You can cancel and return to the call
by tapping [Hold].
4
After the handset user answers, tap
[Disconnect] to end your call and
transfer it to the other handset.
Note:
R Android
R You cannot transfer landline calls to other
smartphones.
When a call is received, your smartphone
behaves according to its vibration and silent
mode settings.
Creating a conference call
1
iPhone/iPad
While on a landline call, tap [Menu].
Android
Using other handsets
While on a landline call, tap or press
your smartphone’s menu button.
Making an intercom call
1
Start the app and open the [Keypad]
screen.
2
Tap [Intercom].
2
3
Tap [Intercom].
Tap the desired handset.
8
Phone Features
3
4
Select the desired handset, and then wait
for the handset user to answer.
R You can cancel and return to the call
by tapping [Hold].
After the handset user answers, open the
options menu and tap [Conference] to
start the conference call.
R You can talk to the outside party
together with the other handset user.
5
When finished, tap [Disconnect] to leave
the conference call.
R The other handset user can continue
to talk to the outside party.
Note:
R Only one smartphone can participate in a
conference call.
Joining a call
If another handset is talking on a landline call,
you can join the call by tapping [In use].
9
Call Log Features
3
4
iPhone/iPad
Tap
next to the person or phone
Viewing the call log
number you want to add.
Android
Tap the person or phone number you
want to add.
1
Start the app and open the [Call log]
screen.
2
Tap the desired tab to view outgoing,
incoming, or missed landline calls.
Tap [Create new contact] or [Add to
existing contact], and then follow the
on-screen instructions.
Note:
R The outgoing call log displays landline calls
made by your smartphone only.
R The incoming and missed call logs display
landline calls that were received only while
your smartphone was connected to the
base unit.
Erasing the call log
You can erase the outgoing, incoming, and
missed call logs.
R After you view the information for a missed
iPhone/iPad
call,
is displayed for that call.
R Calls that were blocked using the base
unit’s call block feature are not displayed in
the call log.
1
Start the app and open the [Call log]
screen.
2
Tap the desired tab to view outgoing,
incoming, or missed landline calls.
3
4
Tap [Menu].
Making a call from the call
log
To erase all calls:
→ Tap [Delete All Calls].
R This option is not available for
missed calls.
To erase selected calls:
→ Tap [Delete Selected Calls], use the
standard iOS method for selected
items to be deleted, and then tap
[Done].
1
2
3
Start the app and open the [Call log]
screen.
Tap the desired tab to view outgoing,
incoming, or missed landline calls.
iPhone/iPad
Tap the desired phone number.
Android
Android
1
2
3
Start the app and open the [Call log]
screen.
Tap
next to the desired phone
number or person.
Tap the desired tab to view outgoing,
incoming, or missed landline calls.
4
Make the call from the [Keypad] screen.
To erase all calls:
→ Tap or press the menu button on
your smartphone, and then select the
erase option.
R Missed calls can only be erased
one at a time.
Adding information from
the call log to your contacts
1
Start the app and open the [Call log]
screen.
To erase one call:
→ Tap the call you want to erase and
then tap
.
2
Tap the desired tab to view outgoing,
incoming, or missed landline calls.
4
Tap [OK].
10
Phonebook Features
Phonebook features
iPhone/iPad
You can use the app’s phonebook features
similarly to the way you use the contacts app
of your smartphone.
Note:
R When using iPad or iPad mini, Smartphone
Connect does not support adding or editing
a contact’s picture.
R Many features of the app function by
accessing the information stored in your
device’s contacts. Depending on the
software version of your device, a dialogue
may be displayed that asks whether you
want to allow the app to access your
contacts. You can change this setting later
if desired in the privacy section your
device’s “Settings” app.
R If you change the privacy setting, the app
restarts. If you are on a call, the call will be
disconnected, therefore we recommend
changing the setting only when you are not
on a call.
Android
Use the phonebook app included with your
smartphone to add, edit, and erase contacts
that are stored in your smartphone.
Note:
R To call a contact stored in your
R To copy contacts stored in your
smartphone to the base unit phonebook,
11
Answering System Features
(speaker, Bluetooth, etc.) to switch
between the available devices.
When finished, tap [Disconnect] to exit
the answering system.
Turning the answering
system on
Answering system features are available for
KX-PRW120 only.
3
1
2
Start the app and open the [More] screen.
Erasing all messages
Tap [Connect to answering system] ®
[Answer on].
1
2
Start the app and open the [More] screen.
Tap [Connect to answering system] ®
[Erase all] ® [OK].
Playing your messages
When your phone system has recorded new
messages,
is displayed in the status bar
(Android version only) and your smartphone’s
notification feature displays a notification. To
play back your messages easily, tap the
notification and then use the playback controls
described below.
1
2
Start the app and open the [More] screen.
Tap [Connect to answering system] ®
[Play].
R Your phone system plays back your
new messages. If there are no new
messages, old messages will be
played back.
R The following operations are available
when playing messages.
– [Skip]: Plays the next message.
– [Repeat]: Repeats the current
message from the beginning, or
plays the previous message.
– [Stop]: Stops message playback
and returns to the previous screen.
– [Erase]: Erases the current
message.
– [Disconnect]: Stops message
playback and exits the answering
system.
– [Audio Source] (iPhone/iPad only):
Allows you to select a different
audio output device for playback.
– [Speaker] (Android version only):
Switches between your
smartphone’s speaker and
earpiece. If a Bluetooth-compatible
device is connected to your
smartphone, tap the audio icon
12
Other Features
R Up to 500 contacts (500 phone numbers
total) can be stored in the base unit
phonebook. Pictures for up to 500 contacts
can be stored in each handset.
R If a phonebook entry is erased from the
base unit phonebook, its picture is not
erased. You can erase it manually
Copying data to your
phone system
You can copy various data stored in your
smartphone to your phone system. When data
is being copied, you can confirm the progress
on the handset’s display.
R Contacts with no phone number assigned
to them will not be copied.
R Phone numbers stored using the
international dialling symbol “+” will be
converted according to base unit’s phone
number conversion code settings. After you
copy contacts from your smartphone to the
base unit, confirm that the phone numbers
were converted properly.
R If the base unit’s memory becomes full
during the copy, the last contact copied
successfully is displayed on the handset.
R If contact information includes characters
not supported by the base unit or handset,
those characters will be replaced by “*”
when they are copied.
Notes about copying data
R When copying, the estimated copy time is
displayed. If network conditions change, it
may take more time to copy the data.
R If a landline call is received while copying
data, the copy stops. Data copied before
the call was received is retained.
R A handset cannot make calls while it is
receiving data.
R If file names include characters not
supported by the handset, those characters
will be replaced by “*” when they are copied.
R iPhone/iPad
If the app is left in the background for about
10 minutes, any current operations will be
cancelled. When transferring data, make
sure the app stays in the foreground until
copying is completed.
Copying specific contacts
1
2
Start the app and open the [More] screen.
Tap [Send contacts] ® [Add to list].
R Your smartphone’s phonebook app
starts.
R Android
In order to use data copying features, your
smartphone must either have an SD card
or user-accessible internal memory.
3
Tap the desired contact.
R The selected contact is added to the
list of items that will be copied. Tap
[Add to list] to select another contact.
Copying contacts
4
5
After you have added all the contacts that
you want to copy, tap [Next].
You can copy contacts from your smartphone
to the base unit phonebook. When you copy
contacts, name and phone number
information is copied to the base unit, and
contacts’ pictures are copied to the selected
handsets.
If sending contacts that have pictures
attached, select the handsets that you
want to copy the contacts’ pictures to,
and then tap [Send].
Copying all contacts
Notes about copying contacts
1
2
Start the app and open the [More] screen.
R Only the first 16 characters of a contact’s
name and 24 digits of a contact’s phone
number are copied.
R If you have multiple phone numbers
assigned to a contact, only the first 6 phone
numbers are copied.
Tap [Send contacts] ® [Send all] ®
[OK].
3
If sending contacts that have pictures
attached, select the handsets that you
13
Other Features
want to copy the contacts’ pictures to,
and then tap [Send].
Copying images
(Android™ version only)
You can copy images from your smartphone
to your handsets, and then use the images as
wallpaper patterns.
Setting phone number
conversion codes
If you store phone numbers in your
smartphone’s contacts using “+” and the
country code, we recommend that you store
the following codes in the base unit.
1
2
Start the app and open the [More] screen.
Tap [Send wallpaper].
R Your smartphone’s default image
viewer app starts.
International code
Store the international dialling prefix that you
need to dial when dialling international phone
numbers manually.
3
4
5
Select the desired picture.
Crop the image.
1
Using one of the handsets included with
your phone system, press MMenuN (right
soft key) #117
Select the handsets that you want to copy
the picture to, and then tap [Send].
Note:
2
Enter the appropriate code (4 digits
R 2 images to be used as wallpaper patterns
max.). ® MOKN ® M
N
can be stored in each handset.
Country code
Store the country code required when calling
your country from overseas.
1
Using one of the handsets included with
your phone system, press MMenuN (right
soft key) #118
Copying the ringtone
(Android version only)
You can copy your smartphone’s current
ringtone to other handsets.
2
Enter the appropriate code (4 digits
max.). ® MOKN ® M
N
1
2
3
Start the app and open the [More] screen.
National access code
If you store domestic phone numbers in your
smartphone using “+” and the country code,
store the number that should replace the
country code when calling domestically.
Tap [Send ringtone] ® [Send].
Select the handsets that you want to copy
the ringtone to, and then tap [Send].
Note:
1
Using one of the handsets included with
your phone system, press MMenuN (right
soft key) #119
R Only your smartphone’s current ringtone
can be copied. To copy a specific ringtone,
first select that ringtone as your
2
Enter the appropriate code (4 digits
smartphone’s ringtone.
max.). ® MOKN ® M
N
R Each handset can store up to 30 ringtone
files or a total of 60 seconds of audio. File
names are limited to 29 characters, not
including the file extension.
R Only the first 60 seconds of a ringtone can
be copied. Use a third-party audio editing
app to shorten the desired ringtone before
copying it, if desired.
Important:
R After you copy contacts from your
smartphone to the base unit, confirm that
the phone numbers were converted
properly.
R This feature only supports MP3 ringtones. If
your smartphone’s ringtone is of another
file format, it cannot be copied.
14
Other Features
R This feature only supports ringtones that
are saved on your smartphone’s SD card or
in its user-accessible internal memory.
Built-in ringtones cannot be copied.
Note:
R If you erase a ringtone that was used as the
handset’s ringtone, “Ringtone 1”
(default) will be used instead.
R If you erase a ringtone that was assigned to
a phonebook category, each handset’s
ringtone setting will be used instead.
R If you erase a picture that was used as the
handset’s wallpaper, “Wallpaper1” will
be used instead.
R If you erase a picture that was assigned to
a phonebook item, no picture will be
displayed when you receive a call from that
caller.
Managing handset memory
If you use your smartphone to copy images
(used by your handsets as wallpaper
patterns), pictures (attached to your
smartphone’s contacts), or ringtones, you can
confirm handset memory usage and erase
unnecessary items to make more memory
available.
Confirming memory usage
Changing sound settings
1
Using one of the handsets included with
your phone system, press MMenuN (right
soft key) #670
Ringtone settings
1
2
Start the app and open the [More] screen.
2
Confirm the information. ® M
N
Tap [Settings] ® [Ringtone] or
[Intercom ringtone].
Erasing data from the handset
memory
3
Select the desired setting.
– [Default ringtone]: The app’s default
ringtone is used.
– [Select music]: The ringtone you
select here is used.
Erasing one item
1
Using one of the handsets included with
your phone system, press MMenuN (right
soft key) #670
– [Silent] (iPhone/iPad only): No
ringtone is heard.
2
3
4
5
6
MbN: “Used” ® MDetailN
Note:
MbN: Select the type of data. ® MMenuN
MbN: “View” ® MOKN
R iPhone/iPad
Music files stored in your device can be
used as ringtones; ringtone files stored in
your device cannot.
MbN: Select the desired item. ® MEraseN
MbN: “Yes” ® MOKN ® M
N
Erasing all items of the same type
Vibration and key tones (iPhone/
iPad only)
1
Using one of the handsets included with
your phone system, press MMenuN (right
soft key) #670
1
2
3
Start the app and open the [More] screen.
2
3
4
5
6
MbN: “Used” ® MDetailN
Tap [Settings].
MbN: Select the type of data. ® MMenuN
MbN: “Erase All” ® MOKN
MbN: “Yes” ® MOKN
Under [Sound settings] slide the on/off
switches to the desired positions.
– [Vibrate]: Your smartphone vibrates
when a call is received.
– [Keypad Tones]: Key tones are heard
when you dial phone numbers.
MbN: “Yes” ® MOKN ® M
N
15
Other Features
– Notifications Centre: On
– Show 5 unread items
– Alert style: Banners
Volume settings (Android
version only)
If the output volume for the speaker,
headphones, etc. is too low or too high, you
can use this setting to raise or lower the app’s
master volume. We recommend you use this
setting in conjunction with your smartphone’s
volume controls.
You can also use this setting to raise or lower
the microphone volume (i.e., the volume of
your voice heard by the other party).
Changing general settings
1
2
3
Start the app and open the [More] screen.
Tap [Settings].
Under [General], tap the desired items to
turn their check boxes on or off or select
the desired settings.
1
2
3
Start the app and open the [More] screen.
Tap [Settings] ® [Volume].
– [Auto launch] (Android version only):
Determines whether the app starts
automatically when you turn on your
smartphone.
– [Voice quality alarm]: Determines
whether an alert tone is heard when
voice quality becomes poor.
Adjust the volume settings as desired.
Note:
R This setting cannot be adjusted while you
are on a call.
– [Landline call handling]: Determines
how landline calls are handled.
– [Keep Alive in Background] (iPhone/
iPad only): Determines whether the
app can receive calls when the app is
in the background. Note that turning
this setting on can affect battery
performance.
Changing status bar and
notification settings
1
2
3
Start the app and open the [More] screen.
Tap [Settings].
Under [Status bar notifications], tap the
desired items to turn their check boxes on
or off.
– [Missed calls]: Determines whether
status bar icons (Android version only)
and notifications are displayed when
there are missed calls.
– [Answering system]: Determines
whether status bar icons (Android
version only) and notifications are
displayed when the answering system
has recorded new messages.
– [Voice mail]: Determines whether
status bar icons and notifications are
displayed when the landline’s voice
mail service has recorded new
messages.
Note:
R iPhone/iPad
If using the app’s notification feature, we
recommend you keep the default settings in
the iOS Notifications Centre.
16
Registration Features
3
4
Under [Registration], tap [Select base].
Registering your
smartphone to additional
base units
Tap [Auto] or the desired base unit and
then tap [Select].
R When [Auto] is selected, the app
automatically connects to a base unit
based on the wireless network name
(SSID) that the smartphone is currently
connected to. When a specific base
unit is selected, the app connects to
that base unit only.
R When [Auto] is selected, you can
confirm which base unit the app is
connected to by tapping [Details].
If the app is not registered to a base unit, use
1
2
3
Start the app and open the [More] screen.
Tap [Settings].
Under [Registration], tap [Register to
base].
4
Select an unused base unit number and
then tap [OK].
Note:
R To associate additional wireless network
names (SSIDs) to a base unit, use the
procedure described in “Adding a wireless
R After selecting a base unit, you can confirm
that the app is connected to the base unit
by checking the status bar icon (Android
R The app searches for base units
connected to the same wireless
network as your smartphone. If no
base units are found, you can tap
[Search] to search again.
5
6
If only one base unit is found:
Continue to the next step.
If more than one base unit is found:
Select the desired base unit and then tap
[OK]. When prompted, enter the required
information and then tap [Done] or [OK].
Changing base unit and handset
name info
Wait for the registration process to end.
R The app’s [Keypad] screen is
displayed when registration has ended.
1
2
3
4
Start the app and open the [More] screen.
Tap [Settings].
Note:
Under [Registration], tap [Select base].
R After registration, you can confirm that the
app is connected to the base unit by
checking the status bar icon (Android
R You can change the base unit name and
the handset name assigned to your
Select the desired base unit and then tap
[Details] ® [Edit].
5
Edit the information as desired and then
tap [Done] or [OK].
Confirming the wireless
access point
Selecting a base unit
1
2
3
Start the app and open the [More] screen.
If you register your smartphone to multiple
base units, this setting determines which base
unit your smartphone connects to. If you have
only one base unit, typically you do not need
to change this setting.
Tap [Settings].
Under [Registration], tap [Wireless AP].
R A list of registered base units and the
wireless network name (SSID)
associated with each base unit is
displayed.
1
2
Start the app and open the [More] screen.
Tap [Settings].
17
Registration Features
Adding a wireless access point
Deregistering your
smartphone
Use this procedure to delete your
smartphone’s registration from the desired
base unit.
If you expand your wireless network by adding
a wireless access point that uses a different
SSID than your wireless router, use this
procedure to add the wireless access point to
the app’s settings. This allows your
smartphone to connect to the base unit when
your smartphone is connected to the new
access point.
1
2
3
Start the app and open the [More] screen.
Tap [Settings].
Note:
Under [Registration], tap
[Deregistration].
R The app can store 10 wireless access
points.
R This procedure is not necessary if the
wireless access point uses the same SSID
as your wireless router.
4
Tap the base unit that you want to
deregister from, and then tap [OK] ®
[OK].
R If your smartphone is not registered to
any other base units, you will be
prompted to register the smartphone
once again. See “Registering your
page 5 to register.
1
Make sure your smartphone is connected
to the new access point.
2
3
4
Start the app and open the [More] screen.
Tap [Settings].
Under [Registration], tap [Wireless AP]
® [Add to list].
5
Select the base unit that you want to
associate with the new access point, and
then tap [Select].
Deleting a wireless access point
Use this procedure only if you need to delete
unnecessary wireless access points.
Note:
R You cannot delete a wireless access point if
your smartphone is currently connected it.
1
2
3
4
Start the app and open the [More] screen.
Tap [Settings].
Under [Registration], tap [Wireless AP].
Select the wireless access point that you
want to delete and then tap [Delete].
18
Other Information
If you experience any trouble
If you experience any trouble with the app’s features, first confirm the following.
R Are your base unit and wireless router turned on and functioning properly?
→ Refer to the operating instructions supplied with your wireless router for troubleshooting
information if necessary. Make sure all cables are functioning and firmly connected.
R Have you configured the base unit to connect to your wireless router?
→ Refer to the Smartphone Connect Setup Guide or Operating Instructions supplied with your
phone system for information if necessary.
R Is your smartphone’s Wi-Fi feature turned enabled?
→ Refer to the operating instructions supplied with your smartphone for troubleshooting
information if necessary.
R Is your smartphone within range of the wireless router that the base unit is connected to?
→ In most cases, your smartphone cannot communicate with your base unit if they are not
connected to the same wireless router.
→ Your smartphone cannot communicate with your base unit when you are away from home.
R Is there a problem with the quality of your wireless router’s signals?
Error messages
General use
Display message
Cause and/or solution
Unable to connect to the
network.
E1-01
R Your smartphone’s Wi-Fi feature is turned off.
→ Turn it on.
R Your smartphone cannot connect to your wireless router.
→ Make sure your wireless router is turned on and functioning.
E1-02
Not connected
E1-04
R Your smartphone cannot connect to the base unit.
→ Make sure the base unit and your wireless router are turned
on and functioning.
The application could not
start.
R Another app running on your phone is preventing this app from
starting.
E1-05
→ iPhone/iPad
Tap the home button two times and force this app to exit.
Quit other apps and then try to start this app again later.
→ Android
Tap [OK] to exit this app. Quit other apps and then try to
start this app again later.
The maximum number of
mobile phones is already
registered to the base unit.
E2-01
R There are already 4 smartphones registered to the base unit.
→ Use a handset to deregister any unused smartphones from
the base unit.
The base unit refused this R There is a problem with registration information stored in the
connection.
E2-02
base unit.
E2-03
19
Other Information
Display message
Cause and/or solution
The base unit didn’t
respond. Please use
another handset to cancel
the registration later.
E2-04
R There was a problem when deregistering your smartphone.
→ Use a handset to deregister your smartphone from the base
unit.
The base unit is not
responding.
E3-01
R There is a communication problem.
→ Make sure that the base unit and your wireless router are
turned on and functioning, turn your smartphone’s Wi-Fi
feature off and then on again, and then try again.
R The base unit’s IP address setting saved in your smartphone is
incorrect.
→ Confirm the base unit’s IP address, and then edit the base
manually change the IP address setting to match the base
unit’s IP address.
Base unit is not selected.
E4-01
E4-02
R Your smartphone has never connected to a base unit while
connected to this wireless network.
→ Use follow the procedure described in “Adding a wireless
access point” to add the SSID (wireless network name) to
The wireless access point R The app cannot save any more wireless access point settings.
table is full.
E4-03
then register your smartphone to the base unit again.
Copying data to other devices
Display message
Cause and/or solution
You cannot send preset
ringtones.
E5-01
R You tried to copy a preset ringtone to a handset.
→ You can only copy ringtones that are saved on your
smartphone’s SD card or in its user-accessible internal
memory.
The file was not found on
the SD card.
E5-03
R The app could not find the current ringtone.
→ Configure your smartphone to use a ringtone that is an MP3
file saved on your smartphone’s SD card or in its
user-accessible internal memory.
No response
E5-04
R The base unit or handset did not respond.
→ Make sure each device is turned on an functioning.
→ Make sure the DECT handset is within range of the base
unit.
Memory full
E5-05
R The base unit’s or handset’s memory is full.
→ Delete unnecessary data and try again. Note that if a
phonebook entry is erased from the base unit phonebook,
its picture is not erased. You can erase it manually
20
Other Information
Display message
Cause and/or solution
Communication error
E5-06
R Wireless communication between the devices is poor.
→ Make sure the relevant devices (smartphone, wireless
router, base unit, handset, etc.) are within range of each
other and that no objects are inhibiting wireless
communication.
R The base unit is not receiving power.
→ Make sure that the base unit is plugged in and is receiving
power.
Android
R You tried to copy a ringtone that was too short.
→ Select a ringtone that is more than 2 seconds long.
R You tried to copy a ringtone file that was too large.
→ Select a smaller ringtone file.
Busy
E5-07
R A call was received while data was being copied, or you
selected a device that is on a call.
→ Wait and try again.
Memory full
Transfer was cancelled.
E5-08
R Your smartphone’s SD card or user-accessible internal
memory is full.
→ Delete unnecessary data and try again.
21
Other Information
Troubleshooting
Refer to the Operating Instructions supplied with your phone system for additional
troubleshooting information.
General use
Problem
Cause and/or solution
Cannot make or receive
landline calls, cannot use
most app features
R Your smartphone’s Wi-Fi feature is disabled.
→ Make sure that your smartphone’s Wi-Fi feature is enabled
and that your smartphone is connected to the same
wireless network as your base unit.
→ Android
If your smartphone’s Wi-Fi sleep feature is configured to
suspend (sleep) its Wi-Fi connection to save power, turn the
sleep feature off.
R You added a new wireless router (or wireless access point) to
your network. The SSID (wireless network name) assigned to
the new device is different from the SSID of the wireless router
that the base unit is connected to.
R You have changed the SSID (wireless network name) or
password assigned to your wireless router, therefore the base
unit cannot connect to your wireless router.
→ Refer to the Operating Instructions supplied with your
phone system and configure the base unit to connect to
your wireless router, and then follow the procedure for
R Your wireless router’s client isolation feature is turned on.
→ If your wireless router’s client isolation feature (a feature
that prevents wireless devices connected to the same
wireless router from communicating with each other) is
turned on, your base unit and your smartphone will not be
able to communicate with each other. Refer to the operating
instructions included with your wireless router and make
sure that this feature is turned off.
Busy tone is heard when
[Landline] is tapped to
make a landline call
R The base unit is busy. Wait and try again later.
Smartphone does not ring R This is normal. When you press M N on the base unit,
when M N is pressed on
base unit
handsets registered to the base unit will ring but smartphones
will not.
22
Other Information
Wireless router signal quality
Problem
Cause and/or solution
Sounds cuts in and out
when talking on landline
calls
R These and other problems may occur if there is a problem with
the quality of your wireless router’s signals.
→ Refer to the operating instructions supplied with your
wireless router and change its channel setting.
→ If the problem continues, refer to the following.
R A microwave oven or other device that generates electrical
radiation is interfering with the signals from your wireless
router.
Noise is heard when
talking on landline calls
Smartphone’s Wi-Fi
connection drops
→ Reposition your wireless router, smartphone, or the
interfering device.
Copying data from your
smartphone to the base
unit or other handsets
takes a long time
→ Do not use the interfering device while you are using the
app.
R Several other devices (computers, smartphones, tablets, etc.)
are accessing your wireless network at the same time.
→ Wait and try again later.
Cannot connect to the
answering system
(KX-PRW120 only)
R There are many other wireless networks in close proximity to
yours.
→ Reposition your wireless router.
R Objects such as walls, floors, ceilings, furniture, etc. are
obstructing, reflecting, or absorbing wireless network signals.
→ Reposition your wireless router or smartphone.
→ Move any objects that may be causing the signal
degradation.
23
Please refer to the base unit’s operating instructions for sales department and customer support
information.
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan
© Panasonic System Networks Co., Ltd. 2013
PNQP1002YA CC0813MG1103
|